Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
10 results
Search Results
Item A laboratory investigation on a single row of suspended porous pipes is conducted in a two-dimensional wave flume to study their hydraulic performance under regular wave attack. The wave energy losses are computed and the effects of porosity, water depth, incident wave steepness and relative wave height on loss coefficient are studied. It is found that loss coefficient increases with an increase in incident wave steepness. Water depth has insignificant effect on K1 when wave steepness is varied. It is also observed that as porosity increases K1 decreases. For the range of variables studied, as the relative wave height increases, K1 decreases.(Energy dissipation in suspended porous pipe breakwaters in laboratory) Rao, S.; Rao, N.B.S.; Shirlal, K.G.2003Item Ocean wave transmission by submerged reef-A physical model study(2007) Shirlal, K.G.; Rao, S.; Rao, M.Ocean waves can be destructive as steeper waves due to their high energy eroding the sandy beaches. During storm surge or high tide, the water level rises and if large waves occur, they will break closer to the beach, releasing enormous amount of energy resulting in strong currents. This causes heavy loss of beach material due to large-scale erosion. If these waves are made to break prematurely and away from the beach, they can be attenuated so as to reduce beach erosion. The reef, which is a homogeneous pile of armour units without a core, breaks the steeper ocean waves, dissipates a major portion of their energy and transmits attenuated waves. This paper experimentally investigates the armour stone stability of the submerged reef and the influence of its varying distance from shore and crest width on ocean wave transmission. © 2007 Elsevier Ltd. All rights reserved.Item Laboratory investigation on hydraulic performance of enlarged pile head breakwater(Elsevier Ltd, 2020) Suvarna, P.S.; Hunasanahally Sathyanarayana, A.H.; Umesh, P.; Shirlal, K.G.Coastal erosion of beaches has been a common problem around the world. One of the eco-friendly control measures for coastal erosion is to dissipate the energy of waves impinging on the shores by constructing offshore breakwater. Pile breakwater is one such type of offshore breakwater that consists of a number of closely spaced piles. Construction of piles at closer spacing is highly challenging and expensive. This problem can be addressed by reducing the number of piles and modifying the pile with an enlarged head in the vicinity of the water surface, where wave energy is concentrated. In the present study, an experimental investigation on the hydraulic performance of enlarged pile head breakwater is conducted in a wave flume. The concept breakwater is subjected to monochromatic waves of varying wave heights, wave periods and water depth. The experimental results show that the least value of transmission coefficient is 0.62 and reflection coefficient is 0.123 with the highest value of dissipation coefficient of 0.77 for the structural configuration of b/D ratio of 0.2, D/Hmax of 0.6 and Y/Hmax of 1.0 at a water depth of 0.3 m. Observed results are encouraging and are in line with the similar type of pile breakwaters in a single row. The present experimental data is also validated with the available theoretical solutions. Since the results from the compared theoretical solution are not in good agreement, a hybrid theoretical model is reconstructed based on experimental results of pile head breakwater. The proposed modified version of the hybrid equation predicts encouragingly better transmission, reflection and dissipation coefficient than the existing solutions. Moreover, the results predicted by the proposed hybrid equation are in good agreement with that of other similar pile breakwater models. © 2020 Elsevier LtdItem Performance characteristics of a conical pile head breakwater: An experimental study(Elsevier Ltd, 2021) Hunasanahally Sathyanarayana, A.H.; Suvarna, P.S.; Umesh, P.; Shirlal, K.G.Breakwaters are constructed for dissipating the wave energy and safeguarding the coastline from destructive wave forces. Conventional pile breakwater built using prismatic circular piles has been proven to provide partial protection efficiently. In the present study, the conventional pile breakwater is modified by widening the pile's cross-sectional area at the surface level in a conical shape. The concept of introducing the conical shape is to attenuate the concentrated wave energy, mainly focusing at the surface. The influence of the structural parameters such as diameter, height and clear spacing of the conical pile head is investigated experimentally for various monochromatic wave climatic conditions. The investigation is also focused on determining the influence of the second row on performance characteristics. The analysis shows that the least transmission coefficient (Kt) of 0.662 for the configuration of D/Hmax = 0.4, Y/Hmax = 1.5 and b/D = 0.1 for a single row of piles. Further, the second row of piles' inclusion resulted in improved attenuation characteristics of conical pile head breakwater (CPHB) with the least Kt of 0.582 at an optimal B/D of 0.4. The performance of the CPHB is compared with the theoretical solutions of conventional pile breakwater. The results indicate that the introduction of pile head on conventional pile breakwater is beneficial in improving wave attenuation. A set of empirical equations is developed based on the experimental values for quick prediction of Kt and Kr. The estimated values of Kt and Kr are in line with the experimental data with a coefficient of determination (R2) of 0.91 and 0.90, respectively. The overall performance of the CPHB is found to be promising as a potential coastal protection structure. © 2021 Elsevier LtdItem Hydraulic performance of perforated enlarged pile head breakwaters through laboratory investigation(Elsevier Ltd, 2021) Suvarna, P.S.; Hunasanahally Sathyanarayana, A.H.; Umesh, P.; Shirlal, K.G.An economical, ecofriendly and efficient breakwater system is vital for coastal protection and harbour tranquility. In this regard, various researchers are working to develop the appropriate solutions to encounter site-specific challenges. With this viewpoint, concept of enlarged pile head breakwater is developed. The study focuses on improving the hydraulic efficiency of pile breakwater by enlarging the structure near the free surface and providing it with perforations. Effect of percentage distribution of perforations, size of perforations and percentage of perforations on wave transmission, reflection and dissipation characteristics of the structure is investigated. The physical experiments are conducted in a two-dimensional wave flume under varying monochromatic wave climates. Results indicate that the pore size highly dominants the wave attenuation than considering the increasing percentage of perforations with the small size of the pore. Perforations effectively reduce the Kt of about 10%–18% to that of non-perforated pile head breakwater. Hydraulic efficiency of enlarged pile head breakwater is optimum when D/Hmax = 0.6, Y/Hmax = 1.0, b/D = 0.2, S = 0.25D, pa = 75% and P = 22.5 at 0.3 m water depth. A hybrid theoretical solution is developed based on the current set of experimental data for the quick estimate of hydraulic coefficients. The proposed hybrid equation for the perforated pile breakwater predicts more desirable values of Kt, Kr and Kd. The proposed concept of breakwater gives a reasonably enhanced hydraulic efficiency than the compared type of breakwaters. © 2021 Elsevier LtdItem Prediction of wave reflection for quarter circle breakwaters using soft computing techniques(National Institute of Science Communication and Policy Research, 2022) Ramesh, N.; Bhaskaran, S.; Rao, S.The modified form of the semi-circular breakwater is called Quarter-Circle Breakwater (QBW). It consists of a quarter-circular surface facing incident waves, a horizontal bottom, a rear wall, and is built on a rubble mound foundation. In general, QCB may be constructed as emerged, with and without perforations that may be on one side or either side based on the coastal designer. These perforations dissipate the energy due to the formation of eddies and turbulence created inside the hollow chamber. In the present study, experimental data obtained from Binumol, 2017 are fed as input to both the models. This data is used to predict the reflection coefficient of QBW by adopting the ANN system approach. The reliability of the Artificial Neural Network (ANN) approach is done with statistical parameters, namely Model Performance Analysis (MPA) viz., Correlation Coefficient (CC), Root Mean Square Error (RMSE), Nash-Sutcliffe Efficiency (NSE), and Scatter Index (SI). The results of the MPA indicate that the ANN is suited for predicting the reflection coefficient of QBW. © 2022 National Institute of Science Communication and Information Resources (NISCAIR). All rights reserved.Item Numerical Modelling of an Innovative Conical Pile Head Breakwater(MDPI, 2022) Hunasanahally Sathyanarayana, A.H.; Suvarna, P.S.; Umesh, P.; Shirlal, K.G.; Bihs, H.; Kamath, A.When moderate wave activity at the shoreline is acceptable, pile breakwaters can serve as an alternative to conventional breakwaters. Increasing the size of the pile breakwater in the vicinity of the free surface increases the hydraulic efficiency, as most of the wave energy is concentrated around the free surface. Therefore, a conical pile head breakwater (CPHB) is proposed in the present study by gradually widening the diameter of the piles towards the free surface. Using the open-source computational fluid dynamics (CFD) model REEF3D, the transmission, reflection, and dissipation characteristics of the CPHB with monochromatic and irregular waves are examined. The investigation is carried out for both perforated and non-perforated CPHBs using monochromatic waves, and the numerical results are validated using experimental data. Further, optimally configured non-perforated and perforated CPHBs are investigated numerically by subjecting them to irregular waves using the Scott–Wiegel spectrum. The wave attenuation characteristics of the CPHBs are found to be better with irregular waves compared to monochromatic waves. With irregular waves, the minimum transmission coefficients for non-perforated and perforated CPHBs are 0.36 and 0.34, respectively. Overall, the CPHB appears to be a potential solution for coastal protection. © 2022 by the authors.Item Dissipation of Gravity Waves Due to Submerged Porous Plate Coupled With Porous Structures(American Society of Mechanical Engineers (ASME), 2023) Krishna, K.R.A.; Abdulla, K.; Karmakar, D.The present study focuses on wave trapping due to the submerged horizontal porous plate combined with the bottom-standing porous structure and surface-piercing porous structure. The submerged plate thickness is considered to be negligible as compared to the incident wavelength and water depth, and the porous structure is considered to be of finite width. The study is performed based on the eigenfunction expansion method, and the wave interaction with the combined structure is investigated using the small amplitude wave theory. The orthogonal mode-coupling relation is used to analyze the wave interaction with the combined structure. The reflection, transmission, and dissipation coefficients along with wave force on the porous structure are investigated to analyze the hydrodynamic performance of the composite porous breakwater system. Further, the effect of porosity of submerged plate and structure, submergence depth of plate and structure, angle of incidence, and the submerged plate length are investigated to analyze the effective wave dissipation by the composite breakwater. In addition, the comparative study of the numerical method is performed with the results available in the literature. The study noted that the wave damping due to the submerged porous plate backed by surface-piercing porous structure is more as compared to the submerged porous plate backed by the bottom-standing porous structure. The study performed will be helpful to scientists and engineers in the design of suitable composite breakwater systems and also assists in selecting the best structural configuration for attenuation of wave height and to protect the offshore facility from high waves in the coastal region. © 2023 American Society of Mechanical Engineers (ASME). All rights reserved.Item Hydrodynamic analysis of an H-shaped pile-restrained floating breakwater combined with a pair of vertical barriers(Elsevier Ltd, 2024) Panda, A.; Karmakar, D.; Rao, M.The present study analyses the performance of a composite breakwater consisting of an H-shaped breakwater attached with vertical/inclined barriers held from both sides using the Multi-Domain Boundary Element Method (MDBEM). The study is performed to analyse the wave transformation characteristics (reflection and transmission), wave energy dissipation and horizontal wave forces due to the gravity wave-structure interaction. The hydrodynamic performance of the integrated breakwater is performed due to the effect of changing various structural properties such as porosity, width and depth of structural elements, relative spacing between breakwater and barrier, angle of incidence and the inclination of the barriers. The boundary conditions and the corresponding edge conditions are incorporated for each surface and interface and correlated with Green's function to solve the boundary value problem. The detailed study proposes the suitable dimensions of the structural elements of the breakwater for optimal performance. The application of inclined barriers over the vertical barrier in certain conditions for maximising wave reflection is presented and analysed to understand the effectiveness of the barrier inclination. The favourable barrier dimensions and the suitable relative spacing for deep water regions are discussed, and the effect of rigidity and porosity of the barriers are analysed to maximise breakwater performance in wave attenuation. On considering the suitable design parameters and structural stability, the composition of vertical/inclined barriers with an H-shaped pile-restrained floating breakwater serves as a protective component by encountering maximum wave force and dissipating considerable wave energy to provide an efficient solution in harbour protection. © 2024 Elsevier LtdItem Investigating the wave attenuation capabilities of rectangular pile head breakwater: A physical modelling approach(Elsevier Ltd, 2024) Hunasanahally Sathyanarayana, A.H.; Suvarna, P.S.; Banagani, V.K.Y.; Umesh, P.; Shirlal, K.G.The study provides a comprehensive examination of single row Rectangular Pile Head Breakwaters (RPHB), encompassing both non-perforated and perforated variations. In the non-perforated RPHB category, the investigation delves into the effects of pile head height and width, and wave climate. For perforated RPHB structures, the study analyses the influence of percentage of perforations, perforation size, and depth of water. Further, the research includes a comparative assessment between non-perforated and perforated RPHB structures. Additionally, the research conducts a comparative analysis with similar structures. In the case of non-perforated RPHB, the configuration with relative pile head diameter (D/d) of 2.4 and relative pile head height (Y/Hmax) of 1.5 stood out as the most effective model. Similarly, the perforated RPHB demonstrated its maximum wave attenuation potential with percentage of perforations (P) of 24% with relative size of perforations (S/D) of 0.25. This optimal configuration achieved a minimal wave transmission coefficient (Kt) of 0.53, reflection coefficient (Kr) of 0.33, and energy dissipation coefficient (Kd) of 0.79 at a relative water depth (h/H) 0.865. Notably, the introduction of perforations on the RPHB structure led to an improvement in wave attenuation performance by 4–8%, resulting in lower reflection and higher energy dissipation. Comparatively, the RPHB structure outperformed the Enlarged (cylindrical) Pile Head Breakwater (EPHB) and Conical Pile Head Breakwater (CPHB) structures in terms of wave attenuation, exhibiting higher reflection and superior energy dissipation characteristics. The consistent outcome of these investigations reveals that the RPHB exhibits superior hydrodynamic performance characteristics and design suitability, making it a promising choice for breakwater applications. © 2024 Elsevier Ltd