Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
8 results
Search Results
Item Modelling, analysis and optimization of adsorption parameters for H3PO4 activated rubber wood sawdust using response surface methodology (RSM)(2009) Helen Kalavathy, M.H.; Iyyaswami, I.; Ganesapillai, M.G.; Miranda, L.R.Adsorption capacity of Cu2+ from aqueous solution onto H3PO4 activated carbon using rubber wood sawdust (RSAC) was investigated in a batch system. Kinetic and isotherm studies were carried out, the thermodynamic parameters like standard Gibb's free energy (?G°), enthalpy (?H°) and entropy (?S°) were evaluated. The pseudo-second-order model was found to explain the kinetics of Cu2+ adsorption most effectively. The process optimization was performed through Central Composite Rotary Design using response surface methodology (RSM) by Design Expert Version 5.0.7 (STAT-EASE Inc., Minneapolis, USA). An initial concentration of 35 mg L-1, temperature of 26 °C, carbon loading of 0.45 g (100 mL)-1, adsorption time 208 min and pH of 6.5 was found to be the optimum conditions for the maximum uptake of copper ions of 5.6 mg g-1 in batch mode. © 2009 Elsevier B.V. All rights reserved.Item Optimization and analysis of nickel adsorption on microwave irradiated rice husk using response surface methodology (RSM)(2009) Ganesapillai, M.G.; Iyyaswami, I.; Helen Kalavathy, M.H.; Murugesan, T.; Miranda, L.R.Background: The removal of heavy metals using adsorption techniques with low cost biosorbents is being extensively investigated. The improved adsorption is essentially due to the pores present in the adsorbent. One way of improving the porosity of the material is by irradiation of the precursor using microwaves. In the present study, the adsorption characteristics of nickel onto microwave-irradiated rice husks were studied and the process variables were optimized through response surface methodology (RSM). Result: The adsorption of nickel onto microwave-irradiated rice husk (MIRH) was found to be better than that of the raw rice husk (RRH). The kinetics of the adsorption of Ni(II) from aqueous solution onto MIRH was found to follow a pseudo-second-order model. Thermodynamic parameters such as standard Gibbs free energy (?G°), standard enthalpy (?H°), and standard entropy (?S°)were also evaluated. The thermodynamics of Ni(II) adsorption onto MIRH indicates that it is spontaneous and endothermic in nature. The response surface methodology (RSM) was employed to optimize the design parameters for the present process. Conclusion: Microwave-irradiated rice husk was found to be a suitable adsorbent for the removal of nickel(II) ions from aqueous solutions. The adsorption capacity of the rice husk was found to be 1.17 mg g-1. The optimized parameters for the current process were found as follows: adsorbent loading 2.8 g (100 mL)-1; Initial adsorbate concentration 6 mg L-1; adsorption time 210 min.; and adsorption temperature 35°C. © 2008 Society of Chemical Industry.Item Removal of remazol brilliant blue dye from dye-contaminated water by adsorption using red mud: Equilibrium, kinetic, and thermodynamic studies(2012) Ratnamala, G.M.; Shetty K, K.V.; Srinikethan, G.Utilization of industrial solid wastes for the treatment of wastewater from another industry could help environmental pollution abatement, in solving both solid waste disposal as well as liquid waste problems. Red mud (RM) is a waste product in the production of alumina and it poses serious pollution hazard. The present paper focuses on the possibility of utilization of RM as an adsorbent for removal of Remazol Brilliant Blue dye (RBB), a reactive dye from dye-contaminated water. Adsorption of RBB, from dye-contaminated water was studied by adsorption on powdered sulfuric acid-treated RM. The effect of initial dye concentration, contact time, initial pH, and adsorbent dosage were studied. Langmuir isotherm model has been found to represent the equilibrium data for RBB-RM adsorption system better than Freundlich model. The adsorption capacity of RM was found to be 27.8 mg dye/g of adsorbent at 40 °C. Thermodynamic analysis showed that adsorption of RBB on acid-treated RM is an endothermic reaction with ?H0 of 28.38 kJ/mol. The adsorption kinetics is represented by second-order kinetic model and the kinetic constant was estimated to be 0.0105 ± 0.005 g/mgmin. Validity of intra-particle diffusion kinetic model suggested that among the mass transfer processes during the dye adsorption process, pore diffusion is the controlling step and not the film diffusion. The process can serve dual purposes of utilization of an industrial solid waste and the treatment of liquid waste. © Springer Science+Business Media Dordrecht 2012.Item Kinetic and thermodynamic studies on the adsorption of heavy metals from aqueous solution by melanin nanopigment obtained from marine source: Pseudomonas stutzeri(Academic Press, 2018) Manirethan, V.; Raval, K.; Rajan, R.; Thaira, H.; Mohan Balakrishnan, R.M.The difficulty in removal of heavy metals at concentrations below 10 mg/L has led to the exploration of efficient adsorbents for removal of heavy metals. The adsorption capacity of biosynthesized melanin for Mercury (Hg(II)), Chromium (Cr(VI)), Lead (Pb(II)) and Copper (Cu(II)) was investigated at different operating conditions like pH, time, initial concentration and temperature. The heavy metals adsorption process was well illustrated by the Lagergren's pseudo-second-order kinetic model and the equilibrium data fitted excellently to Langmuir isotherm. Maximum adsorption capacity obtained from Langmuir isotherm for Hg(II) was 82.4 mg/g, Cr(VI) was 126.9 mg/g, Pb(II) was 147.5 mg/g and Cu(II) was 167.8 mg/g. The thermodynamic parameters revealed that the adsorption of heavy metals on melanin is favorable, spontaneous and endothermic in nature. Binding of heavy metals on melanin surface was proved by Fourier Transform Infrared Spectroscopy (FT-IR) and X-ray Photoelectron Spectroscopy (XPS). Contemplating the results, biosynthesized melanin can be a potential adsorbent for efficient removal of Hg(II), Cr(VI), Pb(II) and Cu(II) ions from aqueous solution. © 2018 Elsevier LtdItem Adsorption mechanism of emerging and conventional phenolic compounds on graphene oxide nanoflakes in water(Elsevier B.V., 2018) Catherine, H.N.; Ou, M.-H.; Manu, B.; Shih, Y.-H.Emerging contaminants (ECs) such as bisphenol A (BPA), 4-nonylphenol (4-NP) and tetrabromobisphenol A (TBBPA) have gained immense attention worldwide due to their potential threat to humans and environment. Graphene oxide (GO) nanomaterial is considered as an important sorbent due to its exceptional range of environmental application owing to its unique properties. GO was also considered as one of ECs because of its potential hazard. The adsorption of organic contaminants such as phenolic ECs on GO affects the stability of GO nanoflakes in water and the fate of organic contaminants, which would cause further environmental risk. Therefore, the adsorption behaviors of emerging and common phenolic compounds (PCs) including phenol, 4-chlorophenol, 2,4-dichlorophenol, 2,4,6-trichlorophenol, 4-NP, BPA and TBBPA on GO nanoflakes and their stability in water were studied. The adsorption equilibrium for all the compounds was reached <10 h and was fitted with Langmuir and Freundlich isotherms. In addition to hydrophobic effect, adsorption mechanisms included ?-? bonding and hydrogen bonding interactions between the adsorbate and GO, especially the electrostatic interactions were observed. Phenol has the highest adsorption affinity due to the formation of hydrogen bond. GO has a good stability in water even after the adsorption of PCs in the presence of a common electrolyte, which could affect its transport with organic contaminants in the environment. These better understandings illustrate the mechanism of emerging and common PC interaction with GO nanoflakes and facilitate the prediction of the contaminant fate in the aquatic environment. © 2018 Elsevier B.V.Item Adsorptive removal of trivalent and pentavalent arsenic from aqueous solutions using iron and copper impregnated melanin extracted from the marine bacterium Pseudomonas stutzeri(Elsevier Ltd, 2020) Manirethan, V.; Raval, K.; Mohan Balakrishnan, R.M.The metalloid arsenic is one of the most conspicuous groundwater contaminants in the Indian subcontinent and its removal from aqueous medium is the main focus of this study. The study aims at functionalising melanin using iron and copper for the efficient removal of arsenic and rendering water fit for consumption. Melanin obtained from the marine bacteria Pseudomonas stutzeri was functionalised by iron impregnation (Fe-melanin) and copper impregnation (Cu-melanin). Morphological studies using FESEM portrayed the impregnated iron and copper granules on the surface of melanin, while XRD analysis confirmed the presence of Fe2O3 and CuO on melanin. Adsorption studies on As (V) and As (III) were conducted using Fe-melanin and Cu-melanin for different operating variables like pH, temperature and contact time. More than 99% per cent of As (III) and As (V) from water was removed at a pH range between 4 and 6 within 50 min in the case of Fe-melanin and 80 min for Cu-melanin. Adsorption equilibrium studies showed better fit with Langmuir adsorption isotherm and had good agreement with Redlich-Peterson's three-parameter model. The maximum adsorption capacities of Fe-melanin and Cu-melanin obtained from Langmuir adsorption model are 50.12 and 20.39 mg/g, respectively, for As (V) and similarly 39.98 and 19.52 mg/g, respectively, for As (III). Arsenic-binding to the functionalised melanin was confirmed using FT-IR and the XPS analysis. Reuse of the adsorbent was effectively done by desorbing the iron and copper together with the bound As (III) and As (V) and further re-impregnation of iron and copper in melanin. Re-functionalised melanin showed 99% adsorption efficiency up to four cycles of adsorption/desorption. A novel iron and copper impregnated melanin was synthesized to remove As (III) and As (V) from groundwater and the adsorption process was optimized. © 2019 Elsevier LtdItem Polypyrrole functionalized Cobalt oxide Graphene (COPYGO) nanocomposite for the efficient removal of dyes and heavy metal pollutants from aqueous effluents(Elsevier B.V., 2021) Anuma, S.; Mishra, P.; Badekai Ramachandra, B.R.A cobalt oxide graphene nanocomposite functionalized with polypyrrole (COPYGO) having a heterogenous porous structure was synthesized using hydrothermal method. Microscopic imaging of the COPYGO surface revealed its highly porous and ordered features. The adsorption performance of the COPYGO composite was systemically investigated for Methylene Blue (MB), Congo red (CR) dyes and toxic lead (Pb(II)) and Cadmium (Cd(II)) metals. These were selected as they are the common pollutants in industrial wastewater. The COPYGO was found to be thermally stable up to 195 oC with a specific surface area of 133 m2 g?1. Experimental data indicates that the COPYGO follows Langmuir and Temkin adsorption isotherm. The COPYGO was efficient in removing MB (92.8%), CR (92.2%), Pb(II) (93.08%) and Cd(II) (95.28%) pollutants at pH 7.2, 5.0, 5.5 and 6.1 respectively from the simulated effluents. The maximum adsorption capacity (Qmax) observed for MB 663.018 mg g-1, CR 659.056 mg g-1, Pb(II) 780.363 mg g?1 and Cd(II) 794.188 mg g?1 pollutants. The thermodynamic analysis of the COPYGO indicates that the adsorption is endothermic and spontaneous in nature. COPYGO showed very high efficient removal rate for the pollutants in simulated effluents which guaranteed its benefits and efficacy in industrial wastewater treatment. © 2021 Elsevier B.V.Item Developing a biocatalyst showcasing the synergistic effect of rice husk biochar and bacterial cells for the removal of heavy metals(Royal Society of Chemistry, 2023) Manikandan, S.K.; Nair, V.Heavy metals like cadmium (Cd) and nickel (Ni) are toxic pollutants that affect the environment and pose health risks. Removal of Cd and Ni through bioremediation in the presence of biochar is a sustainable strategy. This study investigated the removal of Cd and Ni by Pseudomonas stutzeri immobilized on rice husk biochar (PRHB). The removal efficiency was calculated by varying the culture incubation time, pH, temperature, biocatalyst dosage, and initial metal ion concentration. PRHB showed a maximum metal removal capacity of 95% Cd and 92% Ni. The removal efficiency of PRHB was higher than that of free cells, which could be attributed to simultaneous adsorption, ion exchange, complexation, precipitation, and bioaccumulation caused by the biochar carrier and bacteria. The rice husk biochar material served as both an adsorbent and a carrier supplying nutrients for the growth of the bacteria. Considering the excellent metal ion removal capability and reusability, the use of PRHB could be a promising, cost-effective, and environment-friendly strategy for treating wastewater containing heavy metals. © 2023 The Royal Society of Chemistry.