Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
3 results
Search Results
Item Tribo-corrosion study of nickel-free, high nitrogen and high manganese austenitic stainless steel(Elsevier Ltd, 2018) Vats, V.; Baskaran, T.; Arya, S.B.The electrochemical corrosion and tribo-corrosion behaviors of nickel-free high nitrogen (HN SS) and high manganese containing austenitic stainless steel were studied in simulated body fluids such as Ringer's and artificial saliva solutions (ASS) using tribo-meter attached with the potentiostat. Type 316L SS used as reference alloy for comparison. Open circuit potential (OCP) and potentiodynamic polarization techniques were used to examine the passivation and corrosion behavior of both the stainless steels under the applied loads of 5 and 10 N at room temperature and also compared with the static condition of corrosion. Pitting resistance of HN SS was found to be significantly higher over type 316L SS. © 2017 Elsevier LtdItem Influence of weld parameters on the tribocorrosion behaviour of friction stir welded AA5052 in the marine environment(Elsevier Ltd, 2025) Anantharam, G.S.; Bhole, K.B.; Kuriachen, B.; Arya, S.B.The study involves tribocorrosive investigation of FSW-AA5052 formed at tool-speeds of 800, 1000, and 1200 rpm and welding-speeds of 60, 80, and 100 mm/min, for which Pin-on-disc tests in conjunction with open-circuit-potential and potentiodynamic-polarization techniques were utilised. For microstructures EBSD, Optical images and XRD were taken. Results revealed that cast (?1.212 V; 332.43 ?m/year), 800 rpm (?1.213 V; 433.51 ?m/year) and 1000 rpm (-1.236 V; 227.45?m/year) welded samples showed better performance than all the 1200 rpm welded samples. Frictional characteristics of 800 rpm (CoF-1.28) and 1000 rpm (CoF-1.32) samples were better than other samples due to uniform and stable passivation. Elemental analysis showed Oxides and Chlorides of Al and Mg formed over the worn surfaces. © 2025 Elsevier LtdItem Enhancing X70 steel durability: Tribo-corrosion resistance through protective laser cladding(Elsevier Ltd, 2025) Singh, R.K.; Bhole, K.B.; Arya, S.B.; Nayak, J.This study investigates the effects of laser surface cladding (L-DED technique) on the tribo-corrosion behavior of API X70 steel in the simulated Indian oilfield water. Using optimized parameters, 500 W laser power, 720 mm/min scan speed, and 4.2 g/min powder feed rate, 316 L SS was successfully clad onto X70 steel without any significant defects. The results showed a significant improvement in corrosion resistance, with the SS clad exhibiting a corrosion rate of 131.3 ?m/year at 20 N, compared to 287.9 ?m/year for the X70 substrate. SEM and 3D profilometer analyses revealed a more stable tribo-layer on the SS clad, with less damage and debris accumulation. These findings highlight the potential of laser cladding to enhance the durability and lifespan of steel components. © 2025 Elsevier Ltd