Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
5 results
Search Results
Item Experimental and theoretical studies of various solar control window glasses for the reduction of cooling and heating loads in buildings across different climatic regions(Elsevier Ltd, 2018) G, K.K.; Saboor, S.; Kumar, V.; Kim, K.-H.; Babu, A.The glass material and position/orientation of windows are very important to control the heat gain in buildings. In this article, we studied the effect of different window glazing materials (such as bronze, green, grey, bronze-reflective, green-reflective, grey-reflective, gold-reflective, opal blue-reflective, and sapphire blue-reflective glass) in controlling the heat gain by the buildings. The spectral data of diverse window glasses have thus been measured in solar spectrum range of 300–2500 nm. Moreover, the MATLAB codes have been developed to compute solar optical properties (including transmittance, reflectance, and absorbance), solar heat gain coefficient (SHGC), and heat transfer through the glazing material. Thermal analysis was carried out using a total of nine window glasses in eight coordinal directions (E, W, N, S, SE, SW, NE, and NW) against three climatic conditions (hot and dry, warm and humid and composite) in India. In terms of net annual cooling and heating cost savings per window, the grey reflective glass was found to be the most energy saving glass among all glasses tested in this study. The grey reflective glass exhibited the highest cost saving in net annual cooling and heating in all eight orientations across three climatic regions. The grey reflective glass saved the net cost of heating and cooling by $ 61.24 per annum in the south orientation of Jodhpur climatic conditions. © 2018 Elsevier B.V.Item Effect of laser beam size on the dynamics of ultrashort laser-produced aluminum plasma in vacuum(American Institute of Physics Inc. subs@aip.org, 2019) Sankar, P.; Shashikala, H.D.; Philip, R.In laser-produced plasma experiments, the diameter of the irradiating laser beam on the target surface is a major parameter that influences the ablation mechanisms, plasma emission intensity, charged particle ejection, and plume morphology. In this work, the expansion dynamics of an ultrashort laser-produced aluminum plasma is investigated as a function of the laser beam size on the target, using a combination of diagnostic tools, viz., optical emission spectroscopy, fast gated time-resolved imaging, and ion current measurements. A Ti:sapphire laser delivering 100 fs, 6 mJ pulses at 800 nm is used for producing plasma from a pure Al target placed in vacuum (10 -5 Torr) at different positions with respect to the geometrical focus of the beam. Optical emission spectroscopic analysis of the plasma shows that higher emission intensities and ion populations are obtained for smaller beam sizes. Time-resolved Intensified Charge Coupled Device (ICCD) imaging of the expanding plasma shows a spherical morphology for plumes produced by smaller beam sizes and a cylindrical morphology for those produced by larger beam sizes. Temporal profiles of ion emission measured using a Faraday cup are in agreement with ICCD data, featuring a dual peak structure for larger beam sizes indicating distinct slow and fast ionic species, arising from changes in the ablation mechanism for varying laser fluences. Plume expansion is modelled by free expansion for the fast species and by shock wave propagation for the slow species. Ion flux and velocities are relatively high for smaller beam sizes. These studies can be of potential importance for laser processing applications, including laser welding, drilling, and micromachining. © 2019 Author(s).Item Thermal and cost analysis of various air filled double glazed reflective windows for energy efficient buildings(Elsevier Ltd, 2020) Gorantla, G.; Saboor, S.; Vali, S.S.; Mahapatra, D.; Talanki Puttaranga Setty, A.B.; Kim, K.-H.The enormous amount of energy is being consumed by buildings in an attempt to deliver thermal comfort in buildings. This paper aims at reducing/increasing the total solar heat gain through various combinations of double glazed reflective windows of buildings. The spectral characteristics of six reflective glasses namely bronze, green, grey, opal blue, sapphire blue and gold-reflective glasses at a normal angle of incidence by using UV-3600 Shimadzu spectrophotometer according to ASTM E 424 standards were experimentally measured. The solar optical properties of the glasses were deduced by developing a MATLAB code using spectral data which was obtained from experiments in the solar spectrum wavelength range of 300 nm–2500 nm. Thirty air-filled double-glazed reflective windows have been studied for both thermal and cost analysis in the Indian composite climatic zone (New Delhi 28.580 N, 77.200 E). The configuration C13 (Grey reflective glass-Air gap 10 mm-Gold reflective glass) is observed to be the best air-filled double glazed window from the highest annual cost savings ($ 79.29 per annum in SE direction) and lower payback period (1.42 years) point of views among thirty double-glazed reflective glasses studied. The results of this paper are useful in the design of sustainable passive solar buildings. © 2019 Elsevier LtdItem Sustainable reflective triple glazing design strategies: Spectral characteristics, air-conditioning cost savings, daylight factors, and payback periods(Elsevier Ltd, 2021) Gorantla, K.; Saboor, S.; Kontoleon, K.J.; Mazzeo, D.; Maduru, V.R.; Vali, S.V.Buildings with conventional glazing systems are responsible for excessive cooling and heating costs. Sustainable use of energy in building environments requires the use of high-performing opaque and windowed walls. Triple glazing units attenuate solar heat gain/loss compared to single- and double-glazing assemblies, thus reducing air-conditioning costs and greenhouse gas emissions. The optical, energy, economic and environmental performances of a glazing unit are strictly correlated with each other. An improvement of optical properties leads to higher glazing energy performance, cost savings, and greenhouse gas emission mitigations. This work aims to suggest and define an energy-efficient triple glazing unit for lowering cooling and heating costs in buildings while experimentally testing the spectral performance of reflective glasses and assessing heat gains/losses. In this regard, bronze, green, grey, sapphire blue, and gold reflective glasses were considered and settled in sixty different triple glazing combinations. Spectral characteristics of reflective glasses were measured experimentally using a spectrophotometer over the entire solar spectral range (300–2500 nm). For the aims of this investigation, a numerical model was developed to assess the net annual cost saving ($/m2) and the payback period of the examined glazing units for the eight cardinal directions (N, N-E, E, S-E, S, S–W, W and N–W). The results confirmed that the TWG35 window glass unit in the S-E orientation was the most energy-efficient glazing in terms of alleviating this critical challenge (air-conditioning cost-saving 16.72 $/m2 among all other studied window glass units), while a payback period of 2.2 years was revealed. On the other hand, the TWG33 window glass unit has led to the optimal-lowest payback period (2.1 years), with a net annual cost saving of 16.55 $/m2. The findings of this paper demonstrate the significance of triple-glazing design approaches from an economic and environmental point of view. © 2021 Elsevier LtdItem Large and Uniform Single Crystals of MoS2Monolayers for ppb-Level NO2Sensing(American Chemical Society, 2022) Patel, C.; Singh, R.; Dubey, M.; Pandey, S.K.; Upadhyay, S.N.; Kumar, V.; Sriram, S.; Than Htay, M.; Pakhira, S.; Atuchin, V.V.; Mukherjee, S.Recently, unprecedented interest has been immersed toward the synthesis of two-dimensional (2D) transition metal dichalcogenides via the chemical vapor deposition (CVD) system. Synthesis of a uniform and large-sized monolayer MoS2atomic thin film via CVD is still a major bottleneck owing to strong dependence on diverse associated growth parameters. In this work, we have proposed the most viable recipe which is suitable for controlling the nucleation density of Mo and producing a 90 μm-long MoS2monolayer crystal and (695 × 394.8) μm2large MoS2monolayered film on SiO2/Si and c-plane sapphire, respectively. Moreover, MoS2monolayer sensing performance has been thoroughly investigated for NO2exposure at room temperature with a varying response of 4-57.5 for the 100-100 ppm level. Furthermore, the MoS2monolayer sensor exhibits an ultrasensitive NO2detection with limit of detection and limit of qualification values of 1.4 and 4.6 ppb, respectively. In addition, the first-principles-based density functional theory has been employed to analyze the adsorption of NO2on the surfaces of the 2D MoS2monolayer. It is observed that the electronic band gap of the MoS2monolayer after NO2adsorption is reduced by 0.7 eV due to molecular orbital hybridization. © 2022 American Chemical Society. All rights reserved.