Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Subject: search.filters.subject.Reflection

Search Results

Now showing 1 - 10 of 21
  • No Thumbnail Available
    Item
    Design of lighting system for surface mine projects
    (Universitas Ahmad Dahlan thsutikno@ieee.org, 2012) Mangalpady, M.; Jaralikar, S.M.
    Indian mining illumination standard is based on incident light without mentioning about uniformity ratio, but International Commission on Illumination (CIE), Austria insists uniformity ratio. In a mine with low surface reflectance, the surrounding illumination level is lower than the minimum lighting standard as specified by various regulatory bodies. The surface brightness further reduces in wet surface condition, and results in poor visibility. In the present study, design was made both in mineral and overburden benches based on the minimum acceptable reflected light and the reflected uniformity ratio. For the purpose of comparison of various types of lighting systems, a stretch of 1.0 km long haul road was considered. The design was attempted with five different types of luminaries. Lamp mounting heights were varied at five steps, namely 8, 10, 12, 14 and 16 m. Design under wet condition incurs an excess cost 9.4 % for mineral bench and 50 % for overburden bench haul roads. Designing under wet surface condition ensures the minimum light level even under the worst condition of surface reflectivity, with marginal increase in cost. © 2012 Universitas Ahmad Dahlan.
  • No Thumbnail Available
    Item
    Design and fabrication of spectrally selective TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO tandem absorber for higherature solar thermal power applications
    (Elsevier, 2015) Jyothi, J.; Chaliyawala, H.; Srinivas, G.; Nagaraja, H.S.; Barshilia, H.C.
    A new nanostructured TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO tandem absorber has been designed for higherature solar thermal power applications. The first three layers in this tandem act as an absorbing layer, whereas, TiAlSiCO and TiAlSiO act as semi-transparent and anti-reflecting layers. The tandem absorber was deposited on stainless steel substrates using a four-cathode reactive direct current unbalanced magnetron sputtering system. The composition and thicknesses of the individual component layers have been optimized by adjusting the reactive flow rate of C2H2, N2, O2, and also Al, Ti and Si target power densities to achieve high absorptance (0.961) and low emittance (0.07 at 82 °C). The reflectance data showed that the absorptance increases gradually with shift of reflectance minimum to higher wavelengths from first layer to last layer (i.e., TiAlC to TiAlSiO). The thickness of optimized tandem absorber was calculated from the cross-sectional field-emission scanning electron microscopy images and confirmed using transmission electron microscopy. The performance evaluation of the tandem absorber has been evaluated by heating it in air and vacuum under cycling conditions at different temperatures. These results showed that the tandem absorber was stable up to 325 °C in air for 400 h and up to 650 °C in vacuum for 100 h, thus demonstrating its suitability for higherature solar thermal power generation applications. © 2015 Elsevier B.V. All rights reserved.
  • No Thumbnail Available
    Item
    Optical and electrical properties of ITO thin films sputtered on flexible FEP substrate as passive thermal control system for space applications
    (Elsevier, 2016) Sibin, K.P.; Swain, N.; Chowdhury, P.; Dey, A.; Sridhara, N.; Shashikala, H.D.; Sharma, A.K.; Barshilia, H.C.
    ITO thin films were deposited on flexible fluorinated ethylene propylene (FEP) substrates by pulsed direct current reactive magnetron sputtering system using an In:Sn (90%-10% wt.) alloy target. The influence of the deposition parameters (argon and oxygen flow rates, and substrate temperature) and effect of coating thickness on the optical, electrical, structural and microstructural properties of ITO thin films deposited on FEP was investigated. The thickness of the ITO coatings was varied from 5 to 180 nm. The optimized ITO coating (10 nm thick) exhibited high IR emittance (79%) on FEP substrate with high average solar transmittance (94.0%) and moderate sheet resistance (3 k?/sq.). We also investigated in detail the angular dependence of reflectance as well as haze factor of thin ITO coatings. Our results suggest that 10 nm thick ITO coating exhibits an average haze factor of 8.6%. The high value of IR emittance, moderate sheet resistance and high solar transmittance along with low haze factor indicate the suitability of ITO thin films on FEP substrates as flexible optical solar reflector for space applications. © 2015 Elsevier B.V. All rights reserved.
  • No Thumbnail Available
    Item
    Optimization of process parameters to achieve spectrally selective TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO high temperature solar absorber coating
    (Elsevier Ltd, 2016) Jyothi, J.; Latha, S.; Bera, P.; Nagaraja, H.S.; Barshilia, H.C.
    TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO tandem absorber was deposited on stainless steel substrate by using four cathode reactive direct current unbalanced magnetron sputtering system. The reactive gas flow rates (C2H2, N2 and O2) and thicknesses of each individual layers were varied to obtain the selective properties of the tandem absorber. The detailed effects of reactive gas flow rates and thicknesses of the individual layers on the optical properties were studied by using UV–vis–NIR spectrophotometer. Guiding factor in optimizing various process parameters was to achieve low reflectance in the solar spectrum region and high reflectance in the infrared region. The change in growth rate of the tandem absorber with reactive gas flow rate was studied using the thickness data, target voltage and target current. These results indicate a decrease in the growth rate of each individual layer of the tandem absorber with an increase in the flow rates of the reactive gases. The changes in bonding structure and chemical composition with reactive gas flow rates were studied by X-ray photoelectron spectroscopy. The optimized tandem absorber deposited on stainless steel substrate shows absorptance of 0.960 and emittance of 0.15. The thicknesses of the optimized individual layers were ?62, 18, 20, 16, 27 nm, respectively. © 2016 Elsevier Ltd
  • No Thumbnail Available
    Item
    Design and development of ITO/Ag/ITO spectral beam splitter coating for photovoltaic-thermoelectric hybrid systems
    (Elsevier Ltd, 2017) Sibin, K.P.; Selvakumar, N.; Kumar, A.; Dey, A.; Sridhara, N.; Shashikala, H.D.; Sharma, A.K.; Barshilia, H.C.
    ITO/Ag/ITO (IAI) multilayer coatings were designed for spectral beam splitter applications and these coatings were deposited on glass substrates by magnetron sputtering method. The thicknesses of the component layers, namely, Ag and ITO were varied to achieve high visible transmittance, high NIR-IR reflectance and optimum cut-off wavelength. The optimized ITO/Ag/ITO exhibits high visible transmittance (?88%) and high NIR-IR reflectance (>90%) with an optimum cut-off wavelength (?900 nm). A novel chemical etching method was used to improve the transmittance of the plain glass substrate. The optimized IAI multilayer coating deposited on single side etched glass substrate resulted in increase in transmittance (?91%), which is due to the nano-porous morphology of the etched glass substrate. The angular and polarization dependence studies of IAI multilayer coatings were also studied in detail. © 2016 Elsevier Ltd
  • No Thumbnail Available
    Item
    Optical properties of TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO tandem absorber coatings by phase-modulated spectroscopic ellipsometry
    (Springer Verlag service@springer.de, 2017) Jyothi, J.; Biswas, A.; Sarkar, P.; Soum-Glaude, A.; Nagaraja, H.S.; Barshilia, H.C.
    TiAlC, TiAlCN, TiAlSiCN, TiAlSiCO, and TiAlSiO layers of thicknesses ~2.2 ?m, 755, 491, 393, and 431 nm, respectively, were deposited on stainless steel, silicon, and glass substrates to study their refractive indices and extinction coefficients using the phase-modulated spectroscopic ellipsometry in the wavelength range of 300–1200 nm. Absorption coefficient of each layer was calculated from the extinction coefficient of the layer. The results indicate that the first three layers (i.e., TiAlC, TiAlCN, and TiAlSiCN) are absorbing in nature, while TiAlSiCO and TiAlSiO act as intermediate and antireflection layers. Subsequently, a tandem absorber of TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO with layer thicknesses of 62, 20, 18, 16, and 27 nm, respectively, was deposited on stainless steel substrates to fabricate a spectrally selective coating with absorptance of 0.961 and emittance of 0.15 at 82 °C. The obtained refractive indices and extinction coefficients of the tandem absorber were used to simulate the reflectance of the deposited tandem absorber using SCOUT software. Simulated reflectance data of the tandem absorber showed a good agreement with the experimental data measured by UV–Vis–NIR and FTIR spectrophotometry. The angular dependence of the selective properties of the tandem absorber was studied by measuring the reflectance spectra of the tandem absorber at different incident angles. © 2017, Springer-Verlag GmbH Germany.
  • No Thumbnail Available
    Item
    Wave Reflection and Loss Characteristics of an Emerged Quarter Circle Breakwater with Varying Seaside Perforations
    (Springer India sanjiv.goswami@springer.co.in, 2017) Shahulhameed, S.; Rao, S.; Hegde, A.V.
    Breakwaters are one of the most important harbour structures constructed to withstand and dissipate the dynamic energy due to the action of the waves. Due to fast growing need of the universe and advances in technology different types of breakwaters are being developed. Quarter circle breakwater is a new type of breakwater emerged from semi circular breakwater and the first model was developed in Peoples Republic of China (2006). Quarter circle breakwater with perforations posses merits of caisson as well as perforated breakwaters such as low weight, requires less materials, suited for poor soil conditions, easily transported, handled and placed at the site, aesthetically pleasing, cost effective, eco-friendly and stable. Therefore it is necessary to carry out detailed studies on hydrodynamic characteristics to investigate the suitability and applicability of various types of quarter circle breakwaters. The present study investigates the wave reflection and loss characteristics of an emerged seaside perforated quarter circle breakwater of radius 55 cm and with varying ratios of spacing to diameter of perforations, for different water depths and wave conditions. The tests were conducted in the two-dimensional monochromatic wave flume available in Marine Structures laboratory of Department of Applied Mechanics and Hydraulics of National Institute of Technology, Surathkal, Karnataka, India. The results were plotted as non-dimensional graphs and it was observed that the reflection coefficient increases with increase in wave steepness for all values of ratio of height of breakwater structure to water depth. For a constant water depth, wave reflection increases with increase in ratio of spacing to diameter of perforations. It was also found that the loss coefficient decreases with increase in wave steepness for all values of ratio of height of breakwater structure to water depth, and ratio of spacing to diameter of perforations. © 2017, The Institution of Engineers (India).
  • No Thumbnail Available
    Item
    Measurement of high temperature emissivity and photothermal conversion efficiency of TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO spectrally selective coating
    (Elsevier B.V., 2017) Jyothi, J.; Soum-Glaude, A.; Nagaraja, H.S.; Barshilia, H.C.
    A spectrally selective TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO coating was deposited on stainless steel substrate by unbalanced magnetron sputtering system. Each individual layer of the tandem absorber was optimized by varying the reactive gas flow rates (C2H2, N2 and O2) and target power densities (Ti, Al and Si). The optimized tandem absorber shows a solar absorptance of 0.960 and an emittance of 0.15 at 82 °C, measured using solar spectrum reflectometer and emissometer, respectively. In order to study the optical properties of the deposited tandem absorber at high operating temperatures the reflectance spectra of the tandem absorber were measured at temperatures ranging from 80 °C to 500 °C by UV–Vis–NIR spectrophotometer and FTIR spectrometers. The reflectance spectra of the as-deposited sample and after high temperature reflectance measurements did not show any significant changes. The thermal emittance of the tandem absorber at high temperatures (80–500 °C) was studied in detail. At the temperature of 200 °C, 300 °C, 400 °C and 500 °C the tandem absorber shows the emittance of 0.152–0.157, 0.181–0.19, 0.214–0.246 and 0.251–0.275, respectively with an absorptance of ~0.930. These results show the good selectivity of the tandem absorber even at high operating temperatures (e.g., 500 °C) with a photothermal conversion efficiency of 88%, thus demonstrating that the tandem absorber is suitable for solar thermal power generation applications. Reflectance and roughness data of the absorber coating post annealing in air up to 600 °C for 2 h, carried out independently, corroborated the present results. © 2017 Elsevier B.V.
  • No Thumbnail Available
    Item
    The role of atmospheric correction algorithms in the prediction of soil organic carbon from hyperion data
    (Taylor and Francis Ltd. michael.wagreich@univie.ac.at, 2017) Minu, S.; Shetty, A.; Minasny, B.; Gomez, C.
    In this study, the role of atmospheric correction algorithm in the prediction of soil organic carbon (SOC) from spaceborne hyperspectral sensor (Hyperion) visible near-infrared (vis-NIR, 400–2500 nm) data was analysed in fields located in two different geographical settings, viz. Karnataka in India and Narrabri in Australia. Atmospheric correction algorithms, (1) ATmospheric CORection (ATCOR), (2) Fast Line-of-sight Atmospheric Analysis of Spectral Hypercubes (FLAASH), (3) 6S, and (4) QUick Atmospheric Correction (QUAC), were employed for retrieving spectral reflectance from radiance image. The results showed that ATCOR corrected spectra coupled with partial least square regression prediction model, produced the best SOC prediction performances, irrespective of the study area. Comparing the results across study areas, Karnataka region gave lower prediction accuracy than Narrabri region. This may be explained due to difference in spatial arrangement of field conditions. A spectral similarity comparison of atmospherically corrected Hyperion spectra of soil samples with field-measured vis-NIR spectra was performed. Among the atmospheric correction algorithms, ATCOR corrected spectra found to capture the pattern in soil reflectance curve near 2200 nm. ATCOR’s finer spectral sampling distance in shortwave infrared wavelength region compared to other models may be the main reason for its better performance. This work would open up a great scope for accurate SOC mapping when future hyperspectral missions are realized. © 2017 Informa UK Limited, trading as Taylor & Francis Group.
  • No Thumbnail Available
    Item
    Hybrid atmospheric correction algorithms and evaluation on VNIR/SWIR Hyperion satellite data for soil organic carbon prediction
    (Taylor and Francis Ltd. michael.wagreich@univie.ac.at, 2018) Minu, S.; Shetty, A.; Gomez, C.
    Visible near-infrared and shortwave infrared data acquired by spaceborne sensors contain atmospheric noise, along with target reflectance that may affect its end applications, e.g. geological, vegetation, soil surface studies, etc. Several atmospheric correction algorithms have been already developed to remove unwanted atmospheric components of a spectral signature of Earth targets obtained from airborne/spaceborne hyperspectral image. In spite of this, choosing of an appropriate atmospheric correction algorithm is an ongoing research. In this study, two hybrid atmospheric correction (HAC) algorithms incorporating a modified empirical line (ELm) method were proposed. The first HAC model (named HAC_1) combines (i) a radiative transfer (RT) model based on the concepts of RT equations, which uses real-time in situ atmospheric and climatic data, and (ii) an ELm technique. The second one (named HAC_2) combines (i) the well-known ATmospheric CORrection (ATCOR) model and (ii) an ELm technique. Both HAC algorithms and their component single atmospheric correction algorithms (ATCOR, RT, and ELm) were applied to radiance data acquired by Hyperion satellite sensor over study sites in Australia. The performances of both HAC algorithms were analysed in two ways. First, the Hyperion reflectances obtained by five atmospheric correction algorithms were analysed and compared using spectral metrics. Second, the performance of each atmospheric correction algorithm was analysed for prediction of soil organic carbon (SOC) using Hyperion reflectances obtained from atmospheric correction algorithms. The prediction model of SOC was built using partial least square regression model. The results show that (i) both the hybrid models produce a good spectrum with lower Spectral Angle Mapper and Spectral Information Divergence values and (ii) both hybrid algorithms provided better SOC prediction accuracy, in terms of coefficient of determination (R2), residual prediction deviation (RPD), and ratio of performance to interquartile (RPIQ), with R2 ? 0.75, RPD ? 2, and RPIQ ? 2.58 than single algorithms. HAC algorithms, developed using ELm technique, may be recommended for atmospheric correction of Hyperion radiance data, when archived Hyperion reflectance data have to be used for SOC prediction mapping. © 2018, © 2018 Informa UK Limited, trading as Taylor & Francis Group.