Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item ZnO/carbon nanotube nanocomposite for high energy density supercapacitors(2013) Aravinda, L.S.; Nagaraja, K.K.; Nagaraja, H.S.; Bhat, K.; Badekai Ramachandra, B.A facile, green and highly efficient method for the decoration of carbon nanotubes with ZnO was developed for the fabrication of binder-free composite electrode for supercapacitor applications. The nano composite was prepared by using reactive magnetron sputtering in Ar/O2 environment. This approach leads to more uniform coating with tuneable thickness, which alters the electrochemical performance of the nano composite electrodes. The structure and surface morphology of the composite film have been studied by means of X-ray diffraction (XRD) analysis, scanning electron microscopy and field emission scanning electron microscopy (FESEM). The XRD study reveals the formation of Wurtzite ZnO structure. The electrochemical performance of nano composite electrode was investigated using cyclic voltammetry, chronopotentiometry and electrochemical impedance measurements in non-aqueous electrolyte. The nano composite electrode shows significant increase in the specific capacitance up to 48 F g-1 with an energy density 13.1 Wh kg-1 in the potential range -2 V to 1 V. © 2013 Elsevier Ltd. All rights reserved.Item Binder free MoO3/multiwalled carbon nanotube thin film electrode for high energy density supercapacitors(2013) Aravinda, L.S.; Bhat, K.; Badekai Ramachandra, B.MoO3/multiwalled carbon nanotube (MWCNT) composites were prepared by Magnetron sputtering in Ar/O2 atmosphere. This will provide a greener alternative for the fabrication of binder free composite electrode for supercapacitor applications. MWCNT provides good support for the growth of MoO3 thin films. This integrated composite electrode exhibited specific capacitance of 93 F g-1 and a corresponding energy density of 7.28 Wh kg-1 in non-aqueous electrolyte, which is almost fourfold increase compared to the bare MWCNT. Also the electrode maintains high power density of 4930 W kg-1 at high current rates, suggesting a potential energy storage material for portable and consumer electronics. © 2013 Elsevier Ltd. All rights reserved.Item Porous MnO2 nano whiskers bunch/activated carbon based composite electrodes for high energy density supercapacitor(2013) Aravinda, L.S.; Bhat, K.; Badekai Ramachandra, B.A simple room temperature method was used to synthesize Porous ?-MnO2 nano whiskers bunch. The porous ?-MnO2 /Activated carbon (AC) composites were prepared by very simple mechanical mixing method with varying amount of MnO2. A symmetric supercapacitor stack was fabricated using the prepared composite electrode material. The composite with 30% MnO2 exhibit a maximum specific capacitance of 107 Fg-1 at 1 mAcm-2 in non-aqueous electrolyte. The corresponding energy density was found to be 8.35 Whkg-1. The electrode also exhibits excellent cyclic stability. © 2013 The Electrochemical Society.Item Performance of an activated carbon supercapacitor electrode synthesised from waste Compact Discs (CDs)(Korean Society of Industrial Engineering Chemistry A-803 Twin Bldg 275-3 Yangjae-Dong Seocho-Kul Seoul 137-130, 2018) Farzana, R.; Rajarao, R.; Badekai Ramachandra, B.R.; Sahajwalla, V.Microporous activated carbon was synthesised using waste compact discs as precursor through physical activation method for supercapacitor electrode application. The activated carbon prepared at 900 °C for a time interval of 8 h showed highest surface area of 1214.25 m2 g?1. The electrochemical measurements showed that waste CDs derived activated carbon exhibited good specific capacitance, cycle stability and good rate capability compared to other waste derived activated carbon. The specific capacitance 51 F g?1 at the current density of 10 mV s?1 and energy density of 21.43 Wh kg?1 at power density 0.7 kW kg?1 was achieved in non-aqueous electrolyte. © 2018 The Korean Society of Industrial and Engineering Chemistry