Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
23 results
Search Results
Item Facile synthesis of ZnO nanorods by microwave irradiation of zinc-hydrazine hydrate complex(2008) Bhat, D.K.ZnO nanorods have been successfully synthesized by a simple microwave-assisted solution phase approach. Hydrazine hydrate has been used as a mineralizer instead of sodium hydroxide. XRD and FESEM have been used to characterize the product. The FESEM images show that the diameter of the nanorods fall in the range of about 25-75 nm and length in the range of 500-1,500 nm with an aspect ratio of about 20-50. UV-VIS and photoluminescence spectra of the nanorods in solution have been taken to study their optical properties. A mechanism for microwave synthesis of the ZnO nanorods using hydrazine hydrate precursor has also been proposed.Item An empirical model for the estimation of moisture ratio during microwave drying of plaster of Paris(2008) Ganesapillai, M.G.; Iyyaswami, I.; Murugesan, T.The drying characteristics of plaster of Paris (POP) under microwave irradiation were studied for different shapes of materials through various drying parameters like microwave power, initial moisture content, and drying time. An empirical model for the estimation of moisture ratio was developed using the drying kinetic data of POP. Further, the experimental data on moisture ratio of POP for different operating conditions were fitted with the nine basic drying model equations. Based on the observations, the constants and coefficients of the literature models were rewritten in the form of Arrhenius and logarithmic expressions considering microwave power as input variable. Fifty-eight new model expressions were derived by changing the constants and coefficients and tested using the present experimental data. From the analysis of RMSE, ?2, and EF parameters for the derived models, a suitable empirical model (Model No. 55, RMSE = 0.0874; ?2 = 0.0020; EF = 0.9999) was established to represent the present experimental data on microwave drying of POP.Item Characterization and process optimization of microwave drying of plaster of Paris(2008) Ganesapillai, M.G.; Iyyaswami, I.; Murugesan, T.The changes in the characteristics of plaster of Paris (pop) during drying operation under microwave irradiation conditions, namely surface morphology, effective moisture diffusivity, and absorption of microwave, were studied. The drying characteristics and kinetics of the process during microwave drying of plaster were studied for rectangular-faced cuboids (80 × 70 × 15, L × B × H in mm) through various drying parameters like microwave power input, initial moisture content, and drying time. Further, the experimental data on moisture ratio of plaster for different operating conditions were obtained and the optimization of the microwave drying process parameters was performed with response surface methodology (RSM) by considering all the above-said independent variables. Based on the RSM analysis, the optimum values of the process variables were obtained as: initial moisture content (A) 60%; microwave power input (B) 180 W; and drying time (C) 480 S.Item Optimization and analysis of nickel adsorption on microwave irradiated rice husk using response surface methodology (RSM)(2009) Ganesapillai, M.G.; Iyyaswami, I.; Helen Kalavathy, M.H.; Murugesan, T.; Miranda, L.R.Background: The removal of heavy metals using adsorption techniques with low cost biosorbents is being extensively investigated. The improved adsorption is essentially due to the pores present in the adsorbent. One way of improving the porosity of the material is by irradiation of the precursor using microwaves. In the present study, the adsorption characteristics of nickel onto microwave-irradiated rice husks were studied and the process variables were optimized through response surface methodology (RSM). Result: The adsorption of nickel onto microwave-irradiated rice husk (MIRH) was found to be better than that of the raw rice husk (RRH). The kinetics of the adsorption of Ni(II) from aqueous solution onto MIRH was found to follow a pseudo-second-order model. Thermodynamic parameters such as standard Gibbs free energy (?G°), standard enthalpy (?H°), and standard entropy (?S°)were also evaluated. The thermodynamics of Ni(II) adsorption onto MIRH indicates that it is spontaneous and endothermic in nature. The response surface methodology (RSM) was employed to optimize the design parameters for the present process. Conclusion: Microwave-irradiated rice husk was found to be a suitable adsorbent for the removal of nickel(II) ions from aqueous solutions. The adsorption capacity of the rice husk was found to be 1.17 mg g-1. The optimized parameters for the current process were found as follows: adsorbent loading 2.8 g (100 mL)-1; Initial adsorbate concentration 6 mg L-1; adsorption time 210 min.; and adsorption temperature 35°C. © 2008 Society of Chemical Industry.Item An optimization study on microwave irradiated, decomposition of phenol in the presence of H2O2(2009) Prasannakumar, B.R.; Iyyaswami, I.; Murugesan, T.Background: Removal of phenol from industrial waste waters involves basic techniques namely extraction, biodegradation, photocatalytic degradation, etc. Among the available processes, the oxidation of phenols using H2O2 is a suitable alternative because of low cost and high oxidizing power. The application of an oxidation process for the decomposition of stable organic compounds in waste water leads to the total degradation of the compounds rather than transferring from one form to another. Since oxidation using Fenton's reagent ismore dependent on pH, in this present work it was proposed to use H2O2 coupled with microwave irradiation. The effects of initial phenol concentration, microwave power and the irradiation time on the amount of decomposition were studied. Results: In the present work experiments were conducted to estimate the percentage degradation of phenol for different initial concentrations of phenol (100, 200, 300, 400 and 500 mg L-1), microwave power input (180, 360, 540, 720 and 900 W) for different irradiation times. The kinetics of the degradation process were examined through experimental data and the decomposition rate follows first-order kinetics. Response surface methodology (RSM) was employed to optimize the design parameters for the present process. The interaction effect between the variables and the effect of interaction on to the responses (percentage decomposition of phenol) of the process was analysed and discussed in detail. The optimum values for the design parameters of the process were evaluated (initial phenol concentration 300 mg L-1, microwave power output 668 W, and microwave irradiation time 60 s, giving phenol degradation 82.39%) through RSM by differential approximation, and were confirmed by experiment. Conclusion: The decomposition of phenol was carried out using H2O2 coupled with microwave irradiation for different initial phenol concentrations, microwave power input and irradiation times. The phenol degradation process follows first-order kinetics. Optimization of the process was carried out through RSM by forming a design matrix using CCD. The optimized conditions were validated using experiments. The information is of value for the scale up of the oxidation process for the removal of phenol from wastewater. © 2008 Society of Chemical Industry.Item Microwave-assisted batch synthesis of Pongamia biodiesel(2010) Venkatesh Kamath, H.; Iyyaswami, I.; Saidutta, M.B.Background: The major bottleneck of biodiesel synthesis is its cost and this is mainly attributed to the feedstock material. Pongamia pinnata oil is a nonedible oil that is available in plenty in India and has negligible applications. Several methods of synthesis have been established, each having their own advantages and disadvantages. Results & discussion: Biodiesel from high-free fatty acid, nonedible, Pongamia oil was synthesized under microwave irradiation with single- and two-step methods. Experimental investigations showed that although the single-step method had a high yield (80%), the acid value of biodiesel was quite high. Hence, the two-step method seems to be a better approach as it yielded 90%, with 1:10 oil:methanol molar ratio and 1 wt% KOH. Along with a decrease in the reaction time to 4-5 min, separation time was also decreased by at least 90%. A conventional heating method was employed to compare the effects of microwave irradiation on biodiesel synthesis. Conclusion: The results indicate significant improvement in the yield, reaction time and processing time of biodiesel under microwave irradiation. The synthesis of Pongamia biodiesel under microwave irradiation could perhaps lead to cost effective and faster technology in countries such as India. © 2010 Future Science Ltd.Item Optimization of two step karanja biodiesel synthesis under microwave irradiation(2011) Venkatesh Kamath, H.; Iyyaswami, I.; Saidutta, M.B.The free fatty acid of crude karanja oil (Pongamia pinnata) was reduced and biodiesel was synthesized from pretreated oil under microwave irradiation. The process variables such as irradiation time, methanol-oil ratio and sulfuric acid concentration for pretreatment step; irradiation time, methanol-oil ratio and KOH concentration were optimized through the Box-Behnken experimental design. The free fatty acid of crude karanja oil was reduced to 1.11 ± 0.07% with an optimal combination of 190 s irradiation time (180 W), 33.83 (w/w)% methanol-oil ratio and 3.73 (w/w)% sulfuric acid concentration. An optimal combination of 150 s irradiation time, 33.4 (w/w)% methanol-oil ratio and 1.33 (w/w)% KOH concentration yielded 89.9 ± 0.3% biodiesel. The model was validated by conducting experiments at optimal design conditions. The present work confirmed that the microwave energy has a significant effect on esterification and transesterification reaction. © 2010 Elsevier B.V. All rights reserved.Item Microwave-assisted batch and continuous transesterification of karanja oil: Process variables optimization and effectiveness of irradiation: Microwave-assisted transesterification of karanja oil(Springer Verlag service@springer.de, 2013) Iyyaswami, I.; Venkatesh Kamath, V.K.; Yarramreddy, S.R.; Malur Bharathaiyengar, S.The technological advancement in biodiesel production has been the focus area for last the few years and microwave-assisted biodiesel synthesis is one such promising new technology. In the present investigation, microwave irradiation was used to produce biodiesel from non-edible Karanja (Pongamia pinnata) oil in batch and continuous mode. Experiments were conducted to understand the effect of volume of the reaction mixture, irradiation time, and irradiation power on the yield of biodiesel. To increase the effectiveness of the microwave irradiation, biodiesel was synthesized in a continuous tubular reactor at two different holdup volumes. The effect of process parameters viz., irradiation time, irradiation power, and methanol to oil ratio were optimized using Box-Behnken experimental design. The effectiveness of microwave irradiation for the different process conditions have been represented through an effectiveness factor. The results reinforce the advantages of continuous processes over batch processes for the production of biodiesel. The properties of biodiesel, namely ester content, density, viscosity, acid value, and cetane index were analyzed and found to be within the limits as prescribed in ASTM D6751-09 standards. The experimental results that have been obtained in this study would be very useful in the scale-up of the microwave-assisted biodiesel process. © 2013 Springer-Verlag Berlin Heidelberg.Item Reduced graphene oxide derived from used cell graphite and its green fabrication as an eco-friendly supercapacitor(Royal Society of Chemistry, 2014) Sudhakar, Y.N.; Muthu, M.; Bhat, D.; Senthil Kumar, S.Graphite extracted from a used primary cell was converted into reduced graphene oxide (rGO) using calcium carbonate together with rapid and local Joule heating by microwave irradiation. Electrodes were prepared by ultrasonically dispersing rGO in biodegradable poly(vinylpyrrolidone) (PVP) binder and coating this on recyclable poly(ethyleneterephthalate) (PET) sheet using a low cost screen printing technique. The use of the same polymer (PVP) as a binder, in addition to as the solid polymer electrolyte (SPE), enhances the compatibility and ionic conductivity of the hydrophobic rGO electrode in the supercapacitor system. Further, the phosphoric acid (H3PO4)-doped biodegradable SPE was screen printed for the first time on the rGO electrodes. Ionic conductivity and dielectric studies of the SPE were carried out at different temperatures and different dopant acid concentrations. The morphology, composition and structure of the graphene electrode components were characterized using Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) methods. Transmission electron microscopy (TEM) images showed a single layer or a few layers of rGO sheets and selected area electron diffraction showed the presence of slight defects. The fabricated environmentally friendly, industrially favorable and green supercapacitor showed a specific capacitance of 201 F g-1 and cyclic stability with 97% retention of the initial capacitance over 2000 cycles. Furthermore, the performance of this green supercapacitor is comparable to that of those fabricated using rGO synthesized from commercial graphite and in other literature reports. © 2014 The Royal Society of Chemistry.Item An optimization study of microwave assisted extraction of oil from oily sludge using response surface methodology(CAFET INNOVA Technical Society cafetinnova@gmail.com 1-2-18/103, Mohini Mansion, Gagan Mahal Road, Domalguda, Hyderabad 500029, 2014) Kumar, B.; Raj Mohan, B.Petroleum oily sludge, a hazardous waste, generated by the refineries and at the production sites in huge quantities comprises of a mixture of petroleum hydrocarbons, asphaltenes, long chain paraffinic wax, waste water, sediments and metals. The present study is aimed to recover oil from the petroleum oily sludge using n-heptane as the solvent in microwave assisted solvent extraction process and to optimize the process variables for the recovery of oil from the oily sludge. The simultaneous effects of process variables such as irradiation time (2 - 10 minutes), solvent to sludge ratio (40 – 80 wt %), reactant volume (100 – 300 ml) and microwave power (80 – 400 W) on the recovery of oil were evaluated. A central composite design (CCD) and response surface methodology (RSM) were used for the optimization of the extraction process. Based on the CCD, quadratic model was developed to correlate the extraction process variables with the responses and the model was analysed using appropriate statistical method (ANOVA). Optimization of process variables shows that the maximum recovery of oil was about 88.6% at 100 ml of reactant volume with microwave power output of 351 W at 6.5 minutes of irradiation time with 58.99% of nheptane to sludge ratio. © 2014 CAFET-INNOVA TECHNICAL SOCIETY. All rights reserved.
- «
- 1 (current)
- 2
- 3
- »