Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Thermomechanical Simulation of Ferritic Rolling of Titanium-Niobium Interstitial-Free Steel(ASTM International, 2021) Satish Kumar, D.; Sambandam, S.; Kuruveri, U.B.Austenitic or two-phase rolling of ultra-low carbon steels face temperature control issues and generate shape defects. Ferritic rolling has been developed as a solution, and ferritic hot-rolled sheets are used as final products, replacing hot-rolled followed by cold-rolled sheets. However, it is not in regular industrial production because of mill limitations. Hence, ferritic hot rolling must be optimized for developing a ferritic cold-rolled and close-annealed sheet through subsequent processing. In this work, industrial ferritic rolling process was simulated for a titanium-niobium interstitial-free steel using a thermomechanical simulator. Multi-hit plane strain compression tests were carried out at three different regimes below the lower transformation temperature (Ar1). Steels were processed under high strain and strain rates as experienced during industrial hot rolling operation, and the results were compared with the conventional austenitic rolling. The flow stress of the material in the ferritic regime decreased with decreasing deformation temperatures but increased at temperatures below 700°C. Nonuniformity in grains and texture also increased with decreasing temperatures. High-temperature rolling in ferritic condition close to Ar1 temperature does not differ significantly from the austenitic condition, whereas the low-temperature ferritic rolled material had through-thickness microstructural nonuniformity and unwanted goss and brass fibers. The intensity of gamma-fiber {111}Item Microstructure, microhardness, and tensile properties of hot-rolled Al6061/TiB2/CeO2 hybrid composites(South African Institute of Mining and Metallurgy, 2021) Iyengar, S.; Sethuram, D.; Shobha, R.; Koppad, P.G.TiB2 and CeO2 particle-reinforced Al6061 hybrid composites were manufactured using stir casting and hot rolling techniques. The base alloy and composites were hot-rolled at 500ºC and a 50% reduction was achieved through 12 passes. The effect of varying TiB2 and CeO2 particle additions on the microstructure and mechanical properties of the Al6061 matrix was studied. Scanning electron microscopy showed uniform dispersion of both the reinforcements, with good interfacial bonding. Microhardness and tensile properties like yield and tensile strength were found to be higher for hybrid composite with 2.5% TiB2 and 2.5% CeO2 compared to Al6061 alloy and other hybrid composites. The increased tensile strength is attributed to good dispersion and interfacial bonding between the particles and Al6061 matrix. Fracture analysis using a scanning electron microscope revealed ductile fracture for the Al6061 alloy and mixed characteristics of ductile-brittle fracture for hybrid composites. © 2021 South African Institute of Mining and Metallurgy. All rights reserved.Item Recrystallisation Characteristics of a Cu-Bearing HSLA Steel Assessed Through High Temperature Compressive Deformation(Defense Scientific Information and Documentation Centre, 2023) Kumar, A.; Prasad, T.V.V.S.V.; Karthik, V.V.; Banerjee, K.; Gopinath, K.; Balamuralikrishnan, R.Dynamic (DRX) operative during deformation and static recrystallisation (SRX) operative after deformation are considered responsible for the changes in microstructure and texture of deformed materials. Especially in the case of advanced steels that are required in the form of plates of various thicknesses, hot rolling is the main manufacturing process during which the steel undergoes DRX under the rolls and SRX between rolling passes/strands. Knowledge on DRX and SRX characteristics of such steels is crucial for optimisation of hot rolling parameters,achieving the desired microstructure and consequently the targeted mechanical properties.In this study, certain key aspects of both dynamic (DRX) and static recrystallisation (SRX) behaviour of aCu-bearing HSLA steel, which was developed at DMRL, have been explored through high temperature deformation studies using Gleeble thermo-mechanical simulator. Through uniaxial compression testing in the austenitic regime, domains of continuous and discontinuous DRX prevalent in the steel were identified and critical parameters for initiation of dynamic recrystallisation viz., critical strain (ec), critical stress (sc), peak stress (sp) and peak strain (ep) were determined as a function of temperature and strain rate. SRX characteristics were assessed through uniaxial double hit compression tests with fixed strain rate and strain per hit but at different temperatures and with different imposed intermediate static recrystallisation (ISRT) times. From the fractional softening data, parameters such as time for 50 % recrystallisation, t0.5, temperature for 50 % recrystallisation, T0.5, and activation energy, QSRX have been estimated.Although the steel exhibited good plastic deformation characteristics, the results suggest that the role of copper in retarding recrystallisation is significant. © 2023, DESIDOC.Item Formability behaviour of ferritic and austenitic rolled Nb–Ti stabilized IF grade steel(Springer, 2023) Satish Kumar, D.; Sambandam, S.; Udaya Bhat, K.Recently, soft hot strip and hard hot strip produced through ferritic rolling are projected as a direct replacement to austenitic cold-rolled sheets for many forming applications. However, industrial hot-rolling mills, with final rolling thickness limitations cannot produce these thinner products and have to be subsequently cold-rolled to the desired application thickness and further annealed. Under ferritic rolling conditions, the hot-rolling temperature of these coils governs the final properties. The temperature difference in hot-rolled sheets generates the difference in the microstructure and texture of these coils after cold-rolling and annealing and variation in their formability behaviour. In the present work, an Nb–Ti stabilized IF grade steel was hot-rolled at two different temperatures in the ferritic regime and subsequently cold-rolled and annealed for structure-property comparison. As formability is an application-specific requirement, the annealed sheets were tested for different formability characteristics. Industrially rolled samples were tested for fracture criterion, stretch-flangeability, deep drawability and stretch formability through the formability limit diagram, hole expansion ratio, earing test and Erichsen cupping test respectively. These parameters were compared with those of the austenitic regime rolled sheets. High temperature ferritic rolled sheets show improved formability in all tests due to better r ˙ , higher n-value, low Δr and stronger gamma fibre maxima at 111<121>. Low temperature ferritic rolled sheets show the lowest Δr and improved n-value, but has reduced r ˙ and higher alpha fibre texture. High temperature ferritic rolled sheets show higher formability limits in uniaxial tension and low temperature ferritic rolled sheets in biaxial tension of the FLD curve. Various tests established that high temperature ferritic rolled sheets are best suited for deep drawing and stretching applications whereas low temperature ferritic rolled sheets should be preferred for stretch forming applications. © 2022, Indian Academy of Sciences.