Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
38 results
Search Results
Item Assessment of ferrous slag with relevance to physico-chemical properties(Springer, 2020) Anjali, M.S.; Poorani, M.; Shrihari, S.; Sunil, B.M.Blast furnace slag is generated as a by-product in the production of iron. Large quantities of slag are visible in the industrial premises that can have adverse effects on the environment. To mitigate such problems, proper environmental management of slag is of great concern. In this regard, a qualitative and quantitative evaluation of ferrous slags such as crystallinity, surface morphology, and elemental composition were done using X-Ray Diffraction and Field Emission Scanning Electron Microscope with EDS (Energy Dispersive X-Ray Spectrometer), respectively. It is also characterized to determine heavy metals and functional groups using Atomic Absorption Spectroscopy and Fourier Transform Infrared Spectroscopy techniques for various geo-environmental applications. The nonplastic slag material showed 85–92% sand-size particles and 8–15% silt-size particles. The SiO2 and CaO values were found to be high followed by Al2O3, MgO, and other compounds. Since slag performed similarly to sand, it could be used as an alternative source of sand. © Springer Nature Singapore Pte Ltd. 2020.Item A Review on Heavy Metal Adsorption Using Nanocomposites for Wastewater Treatment(Springer, 2025) Uma, U.; Gopi Kumar, S.An introduction of heavy metals through anthropogenic activity into water streams polluting the environment. The effective requirement for removal of heavy metal from wastewater and utilize the treated water for managing the water scarcity among population over the world. The studies on carbon-based nano-materials and its utility in heavy metal removal are improving incredible attraction over the past decades. Carbonaceous nanomaterials exhibit the distinctive properties of hybridized carbon bonds with extraordinary physical–chemical properties at a nano-scale. The special attention focused on different nanomaterials such as graphene-oxide and, carbon nano-tubes. This present study reviews the utilization of nanomaterial composites in the adsorption of heavy metals in the wastewater purification. Further the innovation, forthcoming development, challenges of cost-effective and environmentally acceptable nanomaterials and its interaction between adsorbents for water purification are discussed and reviewed in this article. This review concluded that nanomaterials have many unique morphological and structural properties that qualify to be as effective absorbents to solve several application environmental purifications. © The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd. 2025.Item Optimization and analysis of nickel adsorption on microwave irradiated rice husk using response surface methodology (RSM)(2009) Ganesapillai, M.G.; Iyyaswami, I.; Helen Kalavathy, M.H.; Murugesan, T.; Miranda, L.R.Background: The removal of heavy metals using adsorption techniques with low cost biosorbents is being extensively investigated. The improved adsorption is essentially due to the pores present in the adsorbent. One way of improving the porosity of the material is by irradiation of the precursor using microwaves. In the present study, the adsorption characteristics of nickel onto microwave-irradiated rice husks were studied and the process variables were optimized through response surface methodology (RSM). Result: The adsorption of nickel onto microwave-irradiated rice husk (MIRH) was found to be better than that of the raw rice husk (RRH). The kinetics of the adsorption of Ni(II) from aqueous solution onto MIRH was found to follow a pseudo-second-order model. Thermodynamic parameters such as standard Gibbs free energy (?G°), standard enthalpy (?H°), and standard entropy (?S°)were also evaluated. The thermodynamics of Ni(II) adsorption onto MIRH indicates that it is spontaneous and endothermic in nature. The response surface methodology (RSM) was employed to optimize the design parameters for the present process. Conclusion: Microwave-irradiated rice husk was found to be a suitable adsorbent for the removal of nickel(II) ions from aqueous solutions. The adsorption capacity of the rice husk was found to be 1.17 mg g-1. The optimized parameters for the current process were found as follows: adsorbent loading 2.8 g (100 mL)-1; Initial adsorbate concentration 6 mg L-1; adsorption time 210 min.; and adsorption temperature 35°C. © 2008 Society of Chemical Industry.Item Bed depth service time model for the biosorption of reactive red dye using the Portunus sanguinolentus shell(2010) JagadeeshBabu, P.E.; Krishnan, R.; Singh, M.Biosorption is an efficient and regenerative technique that often uses low-cost adsorbent materials, particularly for the treatment of wastewaters containing dyes and heavy metals. This study investigates the ability of crab shell (Portunus sanguinolentus) to remove reactive red dye in a packed bed up-flow column (internal diameter 2 cm; height 35 cm). Crab shell has high surface area (after proper size reduction) and high regenerative capacity. The experiments were performed with different bed heights (20 and 30 cm) and using different flow rates (12 and 17 ml/min) in order to obtain experimental breakthrough curves. The bed depth service time (BDST) model was used to analyze the experimental data and the model parameters were evaluated. The column regeneration studies were carried out for five different sorption-desorption cycles. The elutant used for the regeneration of the sorbent was 0.01 M EDTA (disodium) solution at pH 9.8 adjusted using NH4OH. This solution was found to have the best bed regeneration capacity and could be reused for several sorption-desorption cycles. The elution efficiency was greater than 99.1% in all seven cycles. Continuous use of the crab shell leads to a decrease in the adsorptive performance, as observed by the breakthrough curves becoming flatter and also because of a broader mass transfer zone. © 2009 Curtin University of Technology and John Wiley & Sons, Ltd.Item Rapid removal of cobalt (II) from aqueous solution using cuttlefish bones; Equilibrium, kinetics, and thermodynamic study(2013) Sandesh, K.; Suresh Kumar, R.; JagadeeshBabu, P.E.The objective of this study is to assess the adsorption potential of cobalt (II) using cuttlefish bones. The bones were treated with 0.01 N HCl to enhance the heavy metal uptake. The adsorbent was characterized using scanning electron microscope and energy dispersive X-ray spectrometer. An adsorption study was conducted in a batch system to optimize process variables such as initial concentration of cobalt (II), pH, sorbent loading, particle size, process temperature, and contact time. The optimal pH was found to be 9. The kinetic data followed the pseudosecond-order kinetic model, and the equilibrium time was found to be 20 min. In the first minute of the adsorption process, 50% of the cobalt (II) was adsorbed by the cuttle bones. Adsorption isotherms were expressed by the Langmuir and Freundlich adsorption models. The Langmuir adsorption model fits the experimental data reasonably well compared with the Freundlich model. The maximum adsorption capacity of this new sorbent was found to be 76.6 mg g-1 at 40 °C. Thermodynamic parameters, including the Gibbs free energy (?Go), enthalpy (?Ho), and entropy (?So), indicated that the adsorption of cobalt (II) by cuttlefish bones was feasible and endothermic at a temperature range of 20-40 °C. © 2012 Curtin University of Technology and John Wiley & Sons, Ltd.Item Effect of chelaters on bioaccumulation of Cd (II), Cu (II), Cr (VI), Pb (II) and Zn (II) in Galerina vittiformis from soil(2013) Damodaran, D.; Shetty K, K.; Raj Mohan, B.Remediation of heavy metal contaminated soil and water streams are of great necessity as heavy metals are toxic and pose hazardous ecological impacts. Low cost mitigation measures like phytoremediation and mycoremediation are commonly employed. Mycoremediation using macro fungi (mushroom) have proven to provide effective tolerance using an efficient accumulation mechanism in removing heavy metals from soil. The current paper reports the heavy metal remediation potential of macro fungi on soil artificially contaminated with 50mgkg-1 of Cu (II), Cd (II), Cr (VI), Pb (II), and Zn (II) ions. Galerina vittiformis belonging to Strophariacea family was found to be effective in removing the heavy metal from the soil under study within 30 days. Both chemical and biological chelaters at 1, 5, and 10mmolkg-1 concentrations were found to increase the mycoremediation potential of the organism. This study showed that G. vittiformis are efficient in remediating heavy metal from contaminated soil and that their remediation potential can be enhanced by the addition of chelaters. © 2013 Elsevier Ltd.Item Uptake of certain heavy metals from contaminated soil by mushroom-Galerina vittiformis(Academic Press, 2014) Damodaran, D.; Shetty K, K.; Raj Mohan, B.Remediation of soil contaminated with heavy metals has received considerable attention in recent years. In this study, the heavy metal uptake potential of the mushroom, Galerina vittiformis, was studied in soil artificially contaminated with Cu (II), Cd (II), Cr (VI), Pb (II) and Zn (II) at concentrations of 50 and 100. mg/kg. G. vittiformis was found to be effective in removing the metals from soil within 30 days. The bioaccumulation factor (BAF) for both mycelia and fruiting bodies with respect to these heavy metals at 50. mg/kg concentrations were found to be greater than one, indicating hyper accumulating nature by the mushroom. The metal removal rates by G. vittiformis was analyzed using different kinetic rate constants and found to follow the second order kinetic rate equation except for Cd (II), which followed the first order rate kinetics. © 2013 Elsevier Inc.Item Cadmium (II) and nickel (II) biosorption by Bacillus laterosporus (MTCC 1628)(Taiwan Institute of Chemical Engineers, 2014) Kulkarni, R.; Shetty K, V.; Srinikethan, G.Biosorption of heavy metals is a promising technology that involves removal of toxic metals from industrial waste streams and natural waters. The study describes the sorption of cadmium (II) [Cd (II)] and nickel (II) [Ni (II)] by dead biomass of Bacillus laterosporus, MTCC 1628. The biosorption conditions for the removal of Cd (II) and Ni (II) were examined by studying the effect of pH, contact time, biosorbent dosage and initial metal ion concentration. Shake flask studies yielded adsorption equilibrium in almost 120. min, for both the metals. It was found from Langmuir model that the maximum adsorption capacity for Cd (II) and Ni (II) ions was 85.47. mg/g and 44.44. mg/g respectively. Kinetic evaluation of the experimental data showed that the biosorption process followed pseudo-second order kinetics. Thermodynamic analysis showed that biosorption is an endothermic process with ?. H° of 5.45. kJ/mol for Cd (II) biosorption and 24.33. kJ/mol for Ni (II) biosorption. The surface characteristics of B. laterosporus biomass before and after metal biosorption were analyzed by using scanning electron microscope (SEM) with energy dispersive X-ray spectroscopy (EDAX) to study the changes in surface morphology and elemental constitution of the adsorbent. B. laterosporus exhibited a higher and better potential biosorbent for the removal of Cd (II) as compared to Ni (II) from aqueous solution. © 2013 Taiwan Institute of Chemical Engineers.Item Preparation and evaluation of heavy metal rejection properties of polysulfone/chitosan, polysulfone/N-succinyl chitosan and polysulfone/N-propylphosphonyl chitosan blend ultrafiltration membranes(Elsevier, 2014) Kumar, R.; Isloor, A.M.; A.F., A.F.Heavy metal rejection properties of chitosan based polysulfone/chitosan (PSf/CS), polysulfonef/N-succinyl chitosan (PSf/NSCS) and polysulfone/N-propylphosphonyl chitosan (PSf/NPPCS) ultrfiltration (UF) membranes were evaluated. The rejection of membranes towards the copper, cadmium and nickel ions was studied during ultrafiltration (UF) by polymer enhanced ultrafiltration (PEUF) processes. The flux change during the UF process and the effect of pH on the rejection were determined. The membrane recycling property was studied during PEUF process by filtering chelated CuSO4 solution. A maximum of 78% of Cu, 73% of Ni and 68% of Cd rejection for M-5 membrane, 75% of Cu, 71% of Ni and 66% of Cd rejection for M-8 membrane and 76% of Cu, 69% of Ni and 66% of Cd rejection for M-2 membrane with reasonably good flux was observed. Further improvement in heavy metal ion rejection was achieved by PEUF process. Membrane M-5 showed a maximum of 98%, 95% and 92% rejection for Cu, Ni and Cd respectively with steady state flux of 117L/m2h. An increase in membrane recycling property after the metal ion rejection was mainly attributed to the hydrophilicity of CS, NSCS and NPPCS. © 2014 Elsevier B.V.Item Inhibitory and stimulating effect of single and multi-metal ions on hexavalent chromium reduction by Acinetobacter sp. Cr-B2(Kluwer Academic Publishers, 2014) Hora, A.; Shetty K, V.Potential application of chromium reducing bacteria for industrial scale wastewater treatment demands that effect of presence of other metal ions on rate of Cr(VI) reduction be investigated, as industrial wastewaters contain many toxic metal ions. In the current study, the effect of different heavy metal ions (nickel, zinc, cadmium, copper, lead, iron) on chromium reduction by a novel strain of Acinetobacter sp. Cr-B2 that shows high tolerance up to 1,100 mg/L and high Cr(VI) reducing capacity was investigated. The alteration in Cr(VI) reduction capacity of Cr-B2 was studied both in presence of individual metal ions and in the presence of multi-metal ions at different concentrations. The study showed that the Cr(VI) reduction rates decreased in presence of Ni2+, Zn2+ and Cd2+ when present individually. Pb2+ at lower concentration did not show significant effect while Cu2+ and Fe3+ stimulated the rate of Cr(VI) reduction. In the studies on multi-metal ions, it was observed that in presence of Cu2+ and Fe3+, the inhibiting effect of Ni2+, Zn2+, Cd2+ and Pb2+ on Cr(VI) reduction was reduced. Each of these metals affect the overall rate of Cr(VI) reduction by Cr-B2. This work highlights the need to consider the presence of other heavy metal ions in wastewater when assessing the bioreduction of Cr(VI) and while designing the bioreactors for the purpose, as rate of reduction is altered by their presence. © 2014, Springer Science+Business Media Dordrecht.