Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
17 results
Search Results
Item Enhancement of the properties of fly ash based geopolymer paste by incorporating ground granulated blast furnace slag(Elsevier Ltd, 2017) Saha, S.; C, C.Research efforts have been made continuously to establish fly ash based geopolymer as an alternative binder material for the production of fresh concrete because production of Ordinary Portland Cement degrades the environment by huge emissions of carbon-di-oxide and also by consuming lot of natural resources. But most of the study reveals, fly ash based geopolymer paste needs more time to get set when it is cured at ambient temperature. As a result, it is quite impractical to use fly ash based geopolymer paste as an alternative to Ordinary Portland Cement in faster construction. In this study, an effort has been made to enhance the properties of fly ash based geopolymer paste by incorporating ground granulated blast furnace slag at various percentage levels. Microstructure of the geopolymer paste is studied using Scanning Electron Microscopy. Result of this investigation shows that significant improvement on setting time and compressive strength can be obtained by adding ground granulated blast furnace slag in the mixes. © 2017 Elsevier LtdItem A study on initial setting time and the mechanical properties of AASC using the PS ball as fine aggregate(Springer, 2019) Talkeri, A.H.; Ravi Shankar, A.U.India is the second largest producer of cement in the world with an annual production of 455 Million Tonnes (MT) which is expected to reach up to 550MT by 2020. In India, the increased demand for cement in the construction industry is required to meet the needs of infrastructure development. However, the production of Portland cement releases significant amounts of CO2 to the atmosphere. Therefore, it is necessary to look for sustainable solutions for concrete production by the use of supplementary cementitious materials. The alternative replacement for Ordinary Portland Cement (OPC) can be Ground Granulated Blast Furnace Slag (GGBS), Fly-ash, Silica fume, Rice-husk ash, which is the various industrial by-products. In this present work, an attempt was made to develop Alkali Activated Slag Concrete (AASC) using Precious Slag (PS) ball as fine aggregate. The development of AASC was made with GGBS as the principal binder. Mixes were developed with binder content 443 kg/m3, Sodium Silicate (SS)/Sodium Hydroxide (SH) ratio of 1 and their performance when exposed to ambient temperature were studied. Alkali binder ratio (0.3) with 8, 10, 12 and 14M NaOH was selected for all the AASC mixes. The test results showed that the slump values for the different mixes satisfying the MoRTH guidelines for concrete pavements. The AASC mixes have higher compressive strength ranging between 41–64 MPa. The fatigue life of the AASC mix was has improved by the addition of PS ball, at the higher concentration of NaOH. © 2019, Chinese Society of Pavement Engineering. Production and hosting by Springer Nature.Item Durability studies on ferrochrome slag as coarse aggregate in sustainable alkali activated slag/fly ash based concretes(Elsevier B.V., 2020) Yaragal, S.C.; Kumar, B.; Jitin, C.Utilization of industrial byproducts in concrete reduces carbon footprint, associated with production of ordinary Portland cement (OPC), and also indirectly controls rapid depletion of natural resources in the form of natural coarse aggregate (NCA). This study reports the durability effect of alkali activated slag/fly ash concretes (AASFC) with ferrochrome slag (FCS) as coarse aggregate. Different AASFC mixtures were prepared with two control factors i.e., fly ash (FA) content (0, 25, and 50% by weight as a replacement to Ground granulated blast furnace slag (GGBS)), and FCS content (0, 50, and 100% by volume as a replacement to NCA). Total nine mixtures were examined for three different durability tests i.e., volume of permeable voids (VPV), acid resistant test, and sulphate resistant test. Further, embodied energy (EE), and Embodied carbon dioxide emission (ECO2e) were also utilized to optimize the AASFC mixtures by grey relational analysis (GRA). Analysis of variance (ANOVA) is used as a statistical tool to investigate the effect of FA, and FCS content on the overall durability and ecological performance of AASFC mixtures. Results show that, addition of FA increases the durability performance (in % age), and addition of FCS decreases the durability performance (in % age) in AASFC mixtures. AASFC mixture with composition of 50% GGBS, 50% FA, and 100% FCS is considered as most suitable mixture. © 2019 Elsevier B.V.Item Replacement of Conventional Base Course with Stabilized Lateritic Soil Using Ground Granulated Blast Furnace Slag and Alkali Solution in the Flexible Pavement Construction(Springer, 2020) Amulya, S.; Ravi Shankar, A.U.The use of cement/chemical-treated base and sub-bases is widely recommended in the pavement construction. Therefore, this paper investigates the behaviour of stabilized lateritic soil as a base course in flexible pavement by replacing the granular base course. The lateritic soil was stabilized with 25% Ground Granulated Blast Furnace Slag (GGBFS) along with the alkali solutions such as sodium hydroxide and sodium silicate at a varying sodium oxide (Na2O) contents of 4, 5 and 6%, silica modulus (Ms, a ratio of silica to sodium oxide) of 0.5, 1.0 and 1.5 and a constant water binder ratio (w/b) of 0.25. The maximum compressive strengths of 5452 and 6593 kPa were achieved for a treated sample consisting of 6% Na2O and 1.0 Ms cured for 28 days at the light and heavy compactions, respectively, which is due to the formation of calcium silicate hydrates when calcium oxide-rich GGBFS reacts with water. Further with the curing period results in an increase in strength due to the formation of calcium alumino-silicate hydrates when GGBFS reacts with alkali solutions. The durability of the samples was evaluated by wetting–drying and freezing–thawing tests. The samples passing the required durability criteria were tested for flexural strength and fatigue life. Scanning electron microscope images showed closely packed crystal orientation indicating high strength. Low and high volume pavements were designed using stabilized soil as a base course, and the strains were evaluated using pavement analysis software. It is suggested that the conventional granular base layer can be replaced with the stabilized soil. © 2020, Indian Geotechnical Society.Item Ferrochrome ash – Its usage potential in alkali activated slag mortars(Elsevier Ltd, 2020) Kumar, K.B.; Yaragal, S.C.; Das, B.B.This study is an attempt to develop a sustainable construction material, i.e., alkali activated slag (AAS) in combination with ferrochrome ash (FCA) as a replacement to ordinary Portland cement (OPC). The effect of the various levels of FCA (0, 25, and 50%) replacing ground granulated blast furnace slag (GGBS) in AAS mortars with 4% of Na2O dosage is studied. Further, five levels of the modulus of silica (Ms = 0.75, 1.00, 1.25, 1.5, and 1.75) are chosen to achieve targeted compressive strength at 28 days under ambient temperature curing conditions. The compressive strength decreases with the increase in level of the FCA replacement. The targeted design compressive strength is achieved with 25% FCA replacement to GGBS in the AAS mortar system with Ms = 1.25. In addition, microstructure and mineralogical studies are undertaken to ascertain the formation of different hydration products with the aid of the scanning electron microscope (SEM) and the X-ray diffractometer (XRD). Gismondine and calcium aluminate silicate hydrate (C-A-S-H) are the major hydration products in the AAS mortar mixes. Sodium aluminate silicate hydrate phases (N-A-S-H) are also observed prominently as the FCA replacement level increases in the AAS mortar mixes. The Fourier-transform infrared spectroscopy (FTIR) confirms the presence of the Si–O-(Si or Al) functional group. The addition of FCA in the AAS system is of vital significance in the reduction of the embodied carbon dioxide (ECO2eq), embodied energy (EEeq) and cost. © 2020 Elsevier LtdItem Stabilisation of lithomargic clay using alkali activated fly ash and ground granulated blast furnace slag(Taylor and Francis Ltd. michael.wagreich@univie.ac.at, 2020) Amulya, A.; Ravi Shankar, A.U.; Praveen, M.A suitable ground improvement technique is essential in order to confront the problems associated with lithomargic clay for road construction. The efficacy of alkaline solutions such as sodium hydroxide and sodium silicate along with class F fly ash and Ground Granulated Blast Furnace Slag (GGBS) as additives to improve the properties of lithomargic clay is examined. The different mixes are prepared by replacing the soil with 20%, 30%, and 40% of GGBS and fly ash. The Maximum Dry Density (MDD) obtained from the soil replaced with 40% GGBS and for the soil replaced with 30% fly ash. An activator modulus of 1.25 is kept constant for the varying sodium oxide dosage at 2, 3 and 4 per cent. The Unconfined Compressive Strength (UCS) of the alkali-activated soil cured for 3, 7 and 28 days is determined and compared with the UCS of the soil replaced with fly ash and GGBS at both standard and modified proctor densities. The different mixes are tested for the durability, California Bearing Ratio (CBR). The soil is replaced with GGBS and fly ash does not pass the durability test while the alkali-activated mixes with 4% sodium oxide dosage is found to be durable. © 2018, © 2018 Informa UK Limited, trading as Taylor & Francis Group.Item Utilization of lateritic soil stabilized with alkali solution and ground granulated blast furnace slag as a base course in flexible pavement construction(Springer, 2020) Amulya, A.; Ravi Shankar, A.U.; Singh, A.; Pammar, K.H.The natural aggregates are depleting in developing countries due to the excessive usage in road and building construction. In the present study, the engineering properties of abundantly available lateritic soil stabilized with Ground Granulated Blast Furnace Slag (GGBS) and alkali solutions like Sodium hydroxide and Sodium silicate was evaluated. The suitability of stabilized soil as a base course in flexible pavements was investigated. The lateritic soil was treated with 15, 20, 25 and 30% of GGBS and alkali solutions consisting of 5% of Sodium oxide with Silica Modulus (Ms) of 0.5, 1.0 and 1.5 at a constant water binder ratio of 0.25. The improved unconfined compressive strength, flexural strength, and fatigue life were observed from the soil treated with 30% of GGBS and alkali solution having Ms 1.0 air-cured for 28 days at ambient temperature. The improvement is due to the formation of Calcium Silicate Hydrates and Calcium Alumino Silicate Hydrates from an exothermic reaction between Calcium ions and the dissolved silicates and aluminates present in GGBS and alkali solutions. The samples treated with 25, 30% of GGBS and alkali solution having 1.0 Ms cured for 28 days found to be durable in Wetting-Drying and Freezing-Thawing tests. The compact and densified crystal orientation of the treated soil samples was observed from the microstructure images obtained from the Scanning Electron Microscope technique. The design of low and high volume roads was suggested with stabilized soil and strains developed at different locations on the proposed pavement were analyzed using pavement analysis software. © 2020, Chinese Society of Pavement Engineering. Production and hosting by Springer Nature.Item Performance of eco-friendly mortar mixes against aggressive environments(Techno-Press info@techno-press.com, 2020) Saha, S.; C, C.; Gupta, P.Past research efforts already established geopolymer as an environment-friendly alternative binder system for ordinary Portland cement (OPC) and recycled aggregate is also one of the promising alternative for natural aggregates. In this study, an effort was made to produce eco-friendly mortar mixes using geopolymer as binder and recycled fine aggregate (RFA) partially and study the resistance ability of these mortar mixes against the aggressive environments. To form the geopolymer binder, 70% fly ash, 30% ground granulated blast furnace slag (GGBS) and alkaline solution comprising of sodium silicate solution and 14M sodium hydroxide solution with a ratio of 1.5 were used. The ratio of alkaline liquid to binder (AL/B) was also considered as 0.4 and 0.6. In order to determine the resistance ability against aggressive environmental conditions, acid attack test, sulphate attack test and rapid chloride permeability test were conducted. Change in mass, change in compressive strength of the specimens after the immersion in acid/sulphate solution for a period of 28, 56, 90 and 120 days has been presented and discussed in this study. Results indicated that the incorporation of RFA leads to the reduction in compressive strength. Even though strength reduction was observed, eco-friendly mortar mixes containing geopolymer as binder and RFA as fine aggregate performed better when it was produced with AL/B ratio of 0.6. © 2020 Techno-Press, Ltd.Item Effect of Elevated Temperatures on Sugarcane Bagasse Ash-Based Alkali-Activated Slag Concrete(Springer, 2021) Kumar, D.S.S.; Chethan, K.; Kumar, B.C.The main focus of researchers in construction sector is to check suitability of ecofriendly alternative materials. Sugarcane bagasse ash (BA) and steel slag (SS) is one among such ecofriendly alternative materials. BA and SS has potential to utilize as binder and coarse aggregate, respectively, in concrete production. In the present investigation, BA and SS were utilized in alkali-activated slag/bagasse ash concrete (AASBC) mixture production. Full factorial experimental design was considered with two input variables, i.e., BA (0, 25, and 50%) and SS (0, 50, and 100%) as replacement to ground granulated blast furnace slag and natural coarse aggregate, respectively. Effect of elevated temperatures on BA and SS-based AASBC mixture were examined. Field emission scanning electron microscope study were carried out to check the morphological changes in ambient and elevated temperature condition. In order to rank different BA and SS-based AASBC mixture performance multi-criteria optimization techniques like, grey relational analysis, technique for order preference by similarity to ideal solution, and desirability function approach were utilized. AASBC mixture with 25% BA content and 100% SS content found to be most suitable AASBC mixture based on multi-criteria optimization technique under elevated temperature conditions. © 2020, Society for Sugar Research & Promotion.Item Hydraulic Performance of Pervious Concrete Based on Small Size Aggregates(Hindawi Limited, 2022) Mulu, A.; Jacob, P.; Dwarakish, G.S.The paper aims to study the impact of clogging on pervious concrete mixes and explore a simple method to calculate permeability and clogging using the falling head method in a fabricated unit. The materials used are cementitious materials and aggregates, along with superplasticizers. The cementitious materials used are OPC Grade 53 cement and micro Ground Granulated Blast Furnace Slag (μGGBS). Two separate narrow aggregate gradations are used: 2.36-4.75 mm and 4.75-6.30 mm. The water-binder ratio is taken as 0.25, and the aggregate-binder ratio is taken as 3.33. The compressive strength, permeability, and clogging potential of pervious concrete are calculated. The average permeability for 2.36-4.75 mm and 4.75-6.3 mm is 4.78 mm/s and 8.16 m/s, respectively. The clogging materials used are clay and sand with a concentration of 5 g/l. The introduction of clay slurry reduces the permeability by 69.8% and 74.9%, respectively, and with sand, it decreases by 74.7% and 71.7%, respectively, in its first cycle. The permeability response for such small aggregates is different from the standard coarse aggregates. The paper compares the study's compressive strength, porosity, and permeability with the existing literature. It concludes that the maximum clogging occurs when the clogging material is introduced to the specimen for the first time. The degradation of permeability depends on the clogging particle's particulate size and the concrete matrix's pore size. The smaller aggregates in pervious concrete are not recommended in areas of high siltation. © 2022 Arega Mulu et al.