Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Design and characterization of a pneumatic muscle actuator with novel end-fittings for medical assistive applications(Elsevier B.V., 2021) do Rosario Carvalho, A.D.; Karanth P, N.; Desai, V.Pneumatic muscle actuators (PMA) are a class of soft actuators known for their high power to weight ratio and inherent compliance. The pneumatic muscle's inherent properties make them very favorable for assistive applications (e.g., medical exoskeletons). This study presents a novel end-fitting design that makes the developed pneumatic muscle actuator lightweight, cost-effective, and modular, thus simplifying the process of assembly and maintenance. The pneumatic muscle actuator assembled using the novel end fittings achieves a shorter overall length without compromising its contraction. The pneumatic muscle actuator has been assembled using a commercial bladder and a braided sleeve alongside a pair of 3D printed novel end-fittings. The paper also details the developed actuator's characterization for force and deflection parameters at various operating pressures. A total of four muscle actuators of varying diameters with constant actuation length (100 mm) were developed and tested to showcase the effect of size on the muscle actuator's behavior. The study presented here also involved comparing three mathematical models developed for pneumatic muscles in order to find a model which closely resembles the developed muscle actuator. Finally, the developed pneumatic muscle actuator's behavior is compared with a commercially available muscle to determine the efficacy of the developed muscle's design. The tests showed that the muscle using a bladder of smaller volume but higher tensile modulus had a higher accuracy and stable performance. As the muscle is intended for medical applications, it was also put through an endurance test with realistic loading and pressure conditions, which revealed very promising results. © 2021 Elsevier B.V.Item Characterization of pneumatic muscle actuators and their implementation on an elbow exoskeleton with a novel hinge design(Elsevier B.V., 2022) do Rosario Carvalho, A.D.D.R.; Karanth P, N.; Desai, V.The exoskeleton plays an essential role in the field of physical rehabilitation. Several actuators are used for the exoskeleton application, but the pneumatic muscle actuator has proved to be the best due to its high power to weight ratio, compliance, and safe operation. The objective of this paper involves the fabrication and experimental characterization of a pneumatic muscle actuator to actuate an exoskeleton for the elbow joint. This paper presents the development and testing of twelve pneumatic muscles of varying materials and sizes, to find the best combination to suit the intended application. The characterization process involved several tests, which related force, deflection, and pressure at various loading conditions. A modular test rig was developed to conduct all the tests with minor adjustments to the test setup. The study also involved designing and developing an elbow exoskeleton to test the pneumatic muscle in the real-world scenario. The exoskeleton is designed with a novel hinge to compensate for the antagonistic nature of the pneumatic muscle actuator. The tests showed the muscles with higher tensile modules bladders having a lower hysteresis and better load handling capability, but these suffered from lower contraction and force characteristics. The styrene-based muscle with a 12mm bladder (S12LB) showed the best force and deflection characteristics at various pressures and loading conditions. The styrene bladder has a modulus closer to the skeletal muscle, therefore demonstrating higher compliance and making it a preferred choice for the exoskeleton application © 2022Item A comparative analysis of crustacean exoskeletons: structural, microstructural, morphological, and UV absorption studies(Institute of Physics, 2024) Nowl, M.S.; Praveen, L.L.; Ambili, V.; Singh, S.; Samad, U.; Seikh, A.H.; Dutta, S.; Mandal, S.This study aims to investigate the structural, thermal, and spectral characteristics, along with the ultra-violet (UV) absorption of various marine benthos exoskeletons, such as various species of crabs (Portunus sanguinolentus, Portunus pelagicus, Charybdis feriata) and mantis shrimp (Oratosquilla oratoria). Their unique properties and ability to survive in harsh oceanic environments make them interesting research subjects. This research utilized powder x-ray diffraction (XRD) analysis to determine the crystal structure of the benthic varieties. The sample surface was analyzed using high-resolution micrographs obtained from field-emission scanning electron microscopy (FESEM), which identified the presence of chitin and calcite in the marine benthos. This was further confirmed by differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FTIR). The optical characteristics were investigated using UV-visible spectroscopy. The proximate analysis revealed high protein content in the mantis shrimp exoskeleton compared to other crab species, highlighting its excellent UV absorption characteristics. Overall, this research has the potential to broaden our understanding of marine organisms, which can have potential applications in biotechnology and materials science to develop nature-inspired innovative materials sustainably. © 2024 The Author(s). Published by IOP Publishing Ltd.Item Comprehensive utilization of crustacean wastes by chemical-catalytic transformations using levulinic acid as a sustainable platform chemical(Springer Science and Business Media Deutschland GmbH, 2025) C, P.N.; Nowl, M.S.; Mandal, S.; Dutta, S.Shell residues from seafood processing and aquaculture industries encounter significant challenges in waste management. There are many traditional and emerging applications of shell waste, but their enormous scale of production outpaces the utilization. This work reports the comprehensive utilization of shell waste by sequentially converting their major components into value-added products by selective chemical transformations. The pigments were extracted using ?-valerolactone (GVL), a biorenewable solvent produced from carbohydrate-derived levulinic acid (LA). The protein component was separated from shells under hydrothermal conditions with or without using any inorganic base. The calcite component was then reacted with LA and formic acid to form calcium levulinate and calcium formate, promising dietary supplements and chemical feedstock. Finally, chitin was converted into LA (30 mol%) under optimized conditions (150 °C, 4 h). Separation and value-addition of the components of crustacean exoskeletons demonstrated in this work are scalable, the products are marketable, and the catalyst used is recyclable. LA produced from chitin is used as the reagent and for synthesizing GVL for a closed-loop biorefinery. © The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature 2025.