Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
5 results
Search Results
Item Synthesis and characterisation of nickel oxide nanofibre webs with alcohol sensing characteristics(Royal Society of Chemistry, 2014) George, G.; Anandhan, S.In this study, nickel oxide (NiO) nanofibres were obtained by a sol-gel electrospinning process followed by calcination from an aqueous sol of poly(2-ethyl-2-oxazoline)/nickel acetate tetrahydrate. Thermogravimetric analysis was used to determine the degradation temperature of the composite fibres, so as to get nickel oxide nanofibres. X-ray photoelectron spectroscopy and X-ray diffraction studies revealed the complete elimination of the organic phase from NiO fibres during calcination. The change in grain size with calcination temperature was determined by X-ray diffraction. The defects in fibres resulted in the modification of their Raman spectra as compared with that of a single crystal. The magnetic properties of the fibres were reduced as the calcination temperature was increased; this is due to the presence of non-stoichiometric defects. As the calcination temperature was increased, the amount of defects was reduced, which induced a difference in the band gap energy of the fibres. Sensitivity of the NiO fibres towards five different alcohols was studied, and the sensitivity towards ethanol was the highest. © The Royal Society of Chemistry 2014.Item An electroactive ?-phase polyvinylidene fluoride as gel polymer electrolyte for magnesium–ion battery application(Elsevier B.V., 2019) Singh, R.; Janakiraman, S.; Khalifa, M.; Anandhan, S.; Ghosh, S.; Adyam, A.; Biswas, K.The gel polymer electrolytes (GPEs) are currently interesting research area in rechargeable batteries. In the present study, synthesis and characterization of electroactive gel polymer electrolyte (EGPE) for Mg-ion batteries application have been investigated. The bead free electroactive polyvinylidene fluoride (PVDF) with high porosity is achieved by an electrospinning process. The ?-phase of PVDF is polar and electroactive with a high dipole moment. Electroactive ?-phase is confirmed by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). Field emission scanning electron microscopy (FESEM) study is done to analyze the structure and morphology of the electroactive membrane. The electroactive gel polymer electrolyte is formed by immersing an electroactive PVDF membrane in 0.3 M magnesium perchlorate (MgClO4) and propylene carbonate (PC) solution. The ionic conductivity of electroactive ?-phase PVDF membrane is achieved to be 1.49 mS cm?1 at 30 °C, which is higher than commercial available polypropylene (PP) Celgard. Tortuosity of electroactive gel polymer electrolyte is found to be 1.44. The voltage stability of the EGPE is stable up to a high voltage of 5.0 V against Mg+2/Mg. The total ionic transference number and magnesium ion transference number of EGPE are also investigated to confirm high ionic conductivity. © 2019 Elsevier B.V.Item Graphene nanoclusters embedded nickel cobaltite nanofibers as multifunctional electrocatalyst for glucose sensing and water-splitting applications(Elsevier Ltd, 2019) Kumar, B.S.; Gudla, V.C.; Ambat, R.; Kalpathy, S.K.; Anandhan, S.Nickel cobaltite (NCO) attains the apex of Sabatier-type volcano plot for electrochemical reaction compared to simple oxides due to synergetic effect of mixed transition metal cations. The combination of high surface area, aspect ratio, and porosity of electrospun NCO nanofibers (NCO-NF) enhance their electrocatalytic performance by improved electron mobility and more active sites. In the present study, NCO-NF fabricated using poly (styrene-co-acrylonitrile) (SAN) as a sacrificial polymer, were embellished with graphene nanoclusters (GNC), which augment the electrocatalytic performance of the NCO-NF. The in situ formed GNC along the NCO-NF are result of the interaction between the polar functional groups of the polymer, and the cations of precursor salts during the calcination of precursor nanofibers. The GNC/NCO-NF with least crystallite size and high aspect ratio having porous NCO nanoparticles and in situ grown GNC were developed using sol-gel electrospinning process assisted by calcination of precursor nanofibers. This simple, eco-friendly, and economical synthesis route with unique structure chemistry of SAN to form GNC and the presence of dual cations (Ni and Co) provides enhanced performance and multifunctionality to GNC/NCO-NF electrodes for electrocatalytic applications, such as biosensors and water-splitting. In the present study, the modified electrodes (GNC/NCO-NF/graphite electrode) exhibited excellent non-enzymatic glucose detection over a wide range of concentration with a lower limit of 1.2 ?M and sensitivity of 1827.5 ?A mM?1 mg?1 in 0.1 M NaOH. Further, the modified electrodes were also tuned for H2O2 detection to aid enzymatic glucose sensing. When examined for bifunctional water-splitting in 1 M NaOH, the electrode reached an onset potential of ?0.537 V and 0.735 V against reversible hydrogen reference electrode and a Tafel slope of 37.6 mV·dec?1 and 67.0 mV·dec?1 for hydrogen and oxygen evolution reactions, respectively. The results prove that GNC/NCO-NF are promising candidates as multifunctional electrocatalyst. © 2019 Elsevier Ltd and Techna Group S.r.l.Item A high thermally stable polyacrylonitrile (PAN)-based gel polymer electrolyte for rechargeable Mg-ion battery(Springer, 2020) Singh, R.; Janakiraman, S.; Khalifa, M.; Anandhan, S.; Ghosh, S.; Adyam, A.; Biswas, K.The ionic conductivity and thermal stability of the electrolyte-separator system is an essential parameter for improving battery performance and safety. The present work addresses the high thermally stable gel polymer electrolyte (GPE) using polyacrylonitrile (PAN) as a polymer membrane and magnesium perchlorate in propylene carbonate (Mg(ClO4)2-PC) as a liquid electrolyte. The PAN based polymer membrane is prepared by electrospinning process which produces a bead free and uniformly distributed nanofibers. The electrospun PAN based GPE is characterized by different physical and electrochemical techniques like X-ray diffraction, field emission scanning electron microscopy, thermogravimetric analysis, differential scanning calorimetry, ionic conductivity, linear sweep voltammetry, magnesium ion transference number and electrochemical impedance spectroscopy. The ionic conductivity of PAN is 3.28 mS cm?1, compared to that of PP Celgard is 1.97 × 10–4 mS cm?1 at 30 °C. The electrochemical stability of PAN is 4.6 V and also exhibits excellent interfacial stability with magnesium metal. The results showed that the PAN-based GPE has higher ionic conductivity and thermal stability than the polypropylene (PP) Celgard membrane. © 2020, Springer Science+Business Media, LLC, part of Springer Nature.Item Magnetic behavior of polymorph composite nickel titanate nanofibers(Royal Society of Chemistry, 2021) Kumar, B.; Dhanasekhar, C.; Anandhan, S.; Kalpathy, S.K.Polymorph (spinel/ilmenite) composite nanofibers of nickel titanate (NTO) were prepared by a sol-gel assisted electrospinning process followed by pyrolysis using the styrene-acrylonitrile copolymer as a precursor at three different pyrolysis soaking temperatures (i.e. T= 773, 973, and 1173 K). The magnetic behavior of these composite NTO nanofibers was studied under isothermal and non-isothermal conditions in the temperature range of 20-300 K. The magnetic parameters such as coercivity (Hc), remanence (Mr), and saturation magnetisation (Ms) were found to be strongly dependent onT. The highestHcandMrwere observed for NTO nanofibers developed at 973 K, which have a mosaic structured morphology with spinel and ilmenite NTO crystallite sizes of ~39 nm and ~24 nm, respectively. On the other hand, the highestMsand switching field distribution were observed for mosaic structured NTO nanofibers having smaller crystallites (~13 nm and 24 nm for spinel and ilmenite NTO, respectively, with high inter-particle distance and high porosity) developed at 773 K, which are also rich in spinel NTO content. The correlation between the variation in magnetic behavior and structural/morphological features of NTO nanofibers is useful for NTO-based soft magnetic and multiferroic applications. © The Royal Society of Chemistry and the Centre National de la Recherche Scientifique 2021.