Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
36 results
Search Results
Item A comparative study on properties of porous friction course mixes with neat bitumen and modified binders(2009) Suresha, S.N.; George, V.; Ravi Shankar, A.U.R.This paper summarises details of the laboratory investigation on the effect of various binders on the performance and durability of porous friction course (PFC) mixes. Three different modified binders and neat bitumen were investigated for three different aggregate gradations at two predetermined binder contents. The performance was evaluated in terms of stone-on-stone contact condition, air voids, and hydraulic-conductivity of compacted PFC mixes. The structural durability was investigated based on aged abrasion loss and moisture susceptibility. The findings provide a better understanding of the effect of each binder type on the performance and durability of PFC mixes. Crown Copyright © 2008.Item Refractive indices and isentropic compressibilities of glycylglycine- FeCl2 in aqueous ethanol mixtures(2010) Santosh, M.S.; Bhat, D.K.The density and refractive index studies have been carried out for glycylglycine-FeCl2 in aqueous ethanol mixtures at four different temperatures in the range T = (288.15 to 318.15) K. A comparative study of the refractive indices obtained experimentally and those calculated by means of Gladstone-Dale and Lorentz-Lorenz relation has been made. Among them, the Gladstone-Dale equation afforded similar values to those obtained experimentally. Isentropic compressibilities, -S, and excess molar isentropic compressibilities, KS,mE, were estimated using the Kirkwood model. Using the Redlich-Kister type equations, excess partial molar isentropic compressibilities, KS,iE, were also obtained. The observed negative values of KS,2E in the water-rich region are due to the structural disorderliness. As infinitely dilute water is hydrogen-bonded to ethanol and glycylglycine, the variation of strength of interaction is not sensed by KS,1E,?. © 2010 American Chemical Society.Item A comparative study on RBF and NARX based methods for forecasting of groundwater level(2011) Dandagala, D.; Deka, P.C.Evaluation and forecasting of groundwater levels through time series model (s) helps for the sustainable development of groundwater resources. The focus of the present study is on the application of Radial Basis Function (RBF) and Non Linear auto-regressive with exogenous variable (NARX) data driven models to forecast groundwater level for multiple input scenario's and also multiple lead time. Weekly time series groundwater level data has been used as input and the models are developed to forecast one, two, three, four, five and sixth week ahead. Root mean square error (RMSE) and correlation coefficient (Cc) are used for evaluating the accuracy of the models. Based on the comparison of results, it was found that the RBF models are superior to the NARX models in forecasting groundwater level considering RMSE and Cc. The obtained result indicates that the RBF has high performance and consistent upto fourth week lead time and decaying performance for NARX models. Hence, RBF and NARX have the potential in forecasting groundwater level efficiently for multi step lead time. © 2011 CAFET-INNOVA TECHNICAL SOCIETY. All rights reserved.Item Modelling operating speed and speed differential on intermediate lane rural roads(2012) Sowmya, N.J.; Ravi Shankar, A.U.; Anjaneyulu, M.V.L.R.Geometric design elements play an important role in defining the operational efficiency of any roadways. Considerable research has been undertaken worldwide to explore the design consistency concept including identifying potential consistency measures and developing models to estimate them. The main objective of this study is to investigate the design consistency of intermediate lane highways existing in Dakshina Kannada district of Karnataka state based on operating speed and speed differential models. The speed measurements are taken at the mid of tangent section and start of the curve during daylight, off-peak periods and under dry weather conditions. The multiple linear regression analysis technique in SPSS (Statistical Package for Social Sciences) software is used for model estimation. Both operating speed (85th percentile speed) and 85th percentile speed differential measures are used with geometric data to identify the design consistency of horizontal curves. A comparative study is performed to identify the variation between these two speed measures. Operating speed and speed differential models for intermediate lane rural roads are presented in this paper. © 2012 CAFET-INNOVA TECHNICAL SOCIETY.Item An Alternative Method to Estimate Fundamental Period of Layered Soil Deposit(Springer India sanjiv.goswami@springer.co.in, 2015) Vijayendra, K.V.; Nayak, S.; Prasad, S.K.There are several approximate methods available for the estimation of fundamental period of layered soil deposits. Approximate methods based on weighted average of shear wave velocities of the layered soil profile are most widely employed in practice. On the other hand, methods which are more accurate are tedious and iterative in procedure; hence they are unpopular for quick estimation of fundamental period of soil deposits. A new method for computing the fundamental period of multilayered soil deposit is proposed in the present study. In this method, layered shear wave velocity profile is replaced with an equivalent linearly varying profile. Subsequently, based on analytical solution for fundamental period of the deposit with linearly varying shear wave velocity profile, an equation to estimate the fundamental period of the actual layered soil deposit is proposed. The efficiency of the proposed method and other available methods is relatively verified by comparing their results with values computed from recorded earthquake accelerograms of instrumented geotechnical downhole arrays. This comparative study, establishes accuracy and consistency of the proposed method vis-à-vis exact methods. © 2014, Indian Geotechnical Society.Item Electrocatalysis by crown-type polyoxometalates multi-substituted by transition metal ions; Comparative study(Elsevier Ltd, 2015) Naseer, R.; Mal, S.S.; Kortz, U.; Armstrong, G.; Laffir, F.; Dickinson, C.; Vagin, M.; McCormac, T.Abstract The difference in electrochemical properties of three crown-type polyoxometalates multi-substituted by Fe3+, Ni2+ or Co2+ ions and their precursor has been rationalized with respect to their electrocatalytic performances studied in solution and in the immobilized state within the layer-by-layer film formed with a positively charged pentaerythritol-based Ru(II)-metallodendrimer. The film assembly was monitored with electrochemical methods and characterized by surface analysis techniques. An influence of the terminal layer on the electrode reaction and on film porosity has been observed. The electrocatalytic performance of the compounds on nitrite reduction was assessed in solution and in the immobilized state. © 2015 Elsevier Ltd.Item Comparison of Oceansat-2 scatterometer- to buoy-recorded winds and spatial distribution over the Arabian Sea during the monsoon period(Taylor and Francis Ltd. michael.wagreich@univie.ac.at, 2015) Gadad, S.; Deka, P.C.For this wind resource assessment (WRA) study, wind speed and direction are the fundamental inputs. Also, these studies are data driven and require large historical wind speed data sets available on the site. This work explores the application of space-based scatterometer winds for assimilation into WRA studies towards the development of offshore wind energy. This article focuses on estimating the performance of Oceansat-2 scatterometer (OSCAT)-derived wind vector using in situ data from buoys at different locations in the Arabian Sea. A comparative study between three methods for estimating the equivalent neutral winds (ENW) for buoys is carried out. OSCAT winds were closest to ENW estimated by the Liu–Katsaros–Businger (LKB) method. The spatial and temporal windows for comparison were 0.5° and ±60 minutes, respectively. The monsoon months (June–September) of 2011 were selected for study. The root mean square deviation for wind speed is less than 2.5 m s?1 and wind direction is less than 20°, and a small positive bias is observed in the OSCAT wind values. From the analysis, the OSCAT wind values are consistent with in situ-observed values. Furthermore, wind atlas maps were developed with OSCAT winds, representing the spatial distribution of winds at a height of 10 m over the Arabian Sea. © 2015 Taylor & Francis.Item A comparative study on the physico-chemical properties of sol-gel electrospun cobalt oxide nanofibres from two different polymeric binders(Royal Society of Chemistry, 2015) George, G.; Anandhan, S.In this study, two different sacrificial polymeric binders, namely poly(2-ethyl-2-oxazoline) (PEtOx) and poly(styrene-co-acrylonitrile) (SAN) along with cobalt acetate tetrahydrate (CATH), as the metal oxide precursor, were used for the fabrication of Co3O4 nanofibres through sol-gel electrospinning. It was observed that the degradation behaviour and physical properties of SAN and PEtOx influenced the structure, morphology and spectral properties of Co3O4 nanofibres, as the properties of the nanofibres obtained from the aforementioned systems were compared with each other. The grain size, shape and the activation energies for grain growth of Co3O4 nanofibres obtained from these two polymeric systems were different. This difference in grain size and shape caused a difference in the optical band gap energies and the magnetic properties of the Co3O4 nanofibres. This study reveals that one can tailor the characteristics of cobalt oxide nanofibres by an appropriate selection of polymeric binders for sol-gel electrospinning. © The Royal Society of Chemistry.Item Comparative study of wetting and cooling performance of polymer-salt hybrid quench medium with conventional quench media(Taylor and Francis Ltd., 2015) Ramesh, G.; Prabhu, K.Wetting kinetics, kinematics, and cooling performance of a polymer-salt hybrid quenchant were investigated. The rewetting phenomenon for brine, water, polymer, and polymer-salt hybrid solutions was characterized as rapid uniform, fast non-uniform, slow uniform, and fast uniform processes, respectively. A dimensionless rewetting time was proposed to assess the nature of the wetting front. The hybrid quenchant showed higher heat transfer during vapor and transition boiling and lower heat transfer during nucleate boiling and convective cooling. The presence of salt in the hybrid solution resulted in early destabilization of the vapor film and an increase in wetting front velocity and rewetting temperature. The polymer constituent delayed the rewetting phenomenon. © 2015 Taylor & Francis Group, LLC.Item Heat transfer distribution of impinging flame and air jets - A comparative study(Elsevier Ltd, 2016) Kadam, A.R.; Tajik, A.R.; Hindasageri, V.Heat transfer distribution of impinging flame jet is compared with that of the impinging air jet based on the experimental data reported in literature for methane-air flame jet and air jet impingement for Reynolds number, R=600-1400 and the non-dimensional nozzle tip to impingement plate distance, Z/d=2-6. The comparative data based on mapping experimental data reported in literature suggest that there is a good agreement between the Nusselt numbers for higher Z/d near stagnation region. However, away from the stagnation region, the Nusselt number for flame jet is higher than that of air jet for similar operating conditions of Re and Z/d. A CFD simulation for impinging air jet and impinging flame jet is carried out to explain the physics and reason for the deviations observed in experimental data. A scale analysis is carried out to identify the dominant forces and their influence on the heat transfer distribution on the impingement plate. © 2015 Elsevier Ltd. All rights reserved.