Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Filters

2011 - 201922020 - 20254

Settings

Subject: search.filters.subject.Cobalt oxides

Search Results

Now showing 1 - 6 of 6
  • No Thumbnail Available
    Item
    Microwave-assisted synthesis and magnetic studies of cobalt oxide nanoparticles
    (2011) Bhatt, A.S.; Bhat, D.K.; Tai, C.-W.; Santosh, M.S.
    An efficient microwave-assisted route has been used to synthesize nanoparticles of cobalt oxide. The particles were well characterized by transmission electron microscopy (TEM) which showed that the average diameter of the particles is around 6 nm. X-ray diffraction (XRD) studies further confirmed the formation of the spinel Co3O4. Purity of the products was detected by Fourier transform infrared spectroscopy (FTIR) combined with thermal gravimetric analysis (TG/DTG). The magnetic measurements revealed a small hysteresis loop at room temperature indicating a weak ferromagnetic nature of the synthesized Co3O4 nanoparticles. The magnetic moment of the particles was measured to be 4.27 ?eff. © 2010 Elsevier B.V. All rights reserved.
  • No Thumbnail Available
    Item
    Decolorization of Reactive Blue 220 aqueous solution using fungal synthesized Co3O4 nanoparticles
    (IWA Publishing 12 Caxton Street London SW1H 0QS, 2019) Valappil, R.S.K.; Vijayanandan, A.S.; Mohan Balakrishnan, R.M.
    In this work, the photocatalytic activity of the biosynthesized cobalt oxide (Co3O4) nanoparticle (NP) is investigated using a textile dye Reactive Blue 220 (RB220) and decolorization % was monitored using UV–Vis spectrophotometer. The photocatalytic activity has been observed maximum at alkaline pH of 9, NP dosage of 250 mg/L, and reaction time of 270 min. In the presence of UV light irradiation, a maximum dye concentration of 10 mg/L was treated effectively using 150 mg/L NP, and 67% decolorization was achieved. Reaction kinetics has been analyzed, and the reaction followed the pseudo kinetics model with an activation energy of -484 kJ mol-1. © IWA Publishing 2019
  • No Thumbnail Available
    Item
    Polypyrrole functionalized Cobalt oxide Graphene (COPYGO) nanocomposite for the efficient removal of dyes and heavy metal pollutants from aqueous effluents
    (Elsevier B.V., 2021) Anuma, S.; Mishra, P.; Badekai Ramachandra, B.R.
    A cobalt oxide graphene nanocomposite functionalized with polypyrrole (COPYGO) having a heterogenous porous structure was synthesized using hydrothermal method. Microscopic imaging of the COPYGO surface revealed its highly porous and ordered features. The adsorption performance of the COPYGO composite was systemically investigated for Methylene Blue (MB), Congo red (CR) dyes and toxic lead (Pb(II)) and Cadmium (Cd(II)) metals. These were selected as they are the common pollutants in industrial wastewater. The COPYGO was found to be thermally stable up to 195 oC with a specific surface area of 133 m2 g?1. Experimental data indicates that the COPYGO follows Langmuir and Temkin adsorption isotherm. The COPYGO was efficient in removing MB (92.8%), CR (92.2%), Pb(II) (93.08%) and Cd(II) (95.28%) pollutants at pH 7.2, 5.0, 5.5 and 6.1 respectively from the simulated effluents. The maximum adsorption capacity (Qmax) observed for MB 663.018 mg g-1, CR 659.056 mg g-1, Pb(II) 780.363 mg g?1 and Cd(II) 794.188 mg g?1 pollutants. The thermodynamic analysis of the COPYGO indicates that the adsorption is endothermic and spontaneous in nature. COPYGO showed very high efficient removal rate for the pollutants in simulated effluents which guaranteed its benefits and efficacy in industrial wastewater treatment. © 2021 Elsevier B.V.
  • No Thumbnail Available
    Item
    Unveiling the Versatile Applications of Cobalt Oxide-Embedded Nitrogen-Doped Porous Graphene for Enhanced Energy Storage and Simultaneous Determination of Ascorbic Acid, Dopamine and Uric Acid
    (Institute of Physics, 2024) Agadi, N.P.; Hegde, S.S.; Teradal, N.L.; Badekai Ramachandra, B.R.; Seetharamappa, J.
    The advancement of electrode materials is essential for addressing the energy and biomedical challenges. A multi-functional approach was employed to create a new electrode material of cobalt oxide-embedded nitrogen-doped porous graphene (Co3O4@NpG) for sensing and energy storage applications. In the present study, we have fabricated a new electrochemical sensing platform based on Co3O4@NpG. The sensing performance and selective detection capability of the demonstrated sensor was optimized and tested by determining dopamine (DA), uric acid (UA), and ascorbic acid (AA) simultaneously in analyte fortified biological samples. The sensing response is noticed to be linearly dependent upon the concentration of AA, DA, and UA in the range of 0.1-450, 0.1-502, and 0.2-396 μM, respectively. This material also showed good electrochemical energy storage performance when assessed as a supercapacitor electrode. The Co3O4@NpG electrode material showcased a remarkable specific capacitance of 314.58 Fg−1, an energy density of 10.06 Wh kg−1 at a power density of 240 Wkg−1 at 0.5 Ag−1, in a 6 M KOH electrolyte, along with excellent long-term cycling stability. Hence, the material Co3O4@NpG stands out as a promising multifunctional electrode candidate, excelling in the precise simultaneous detection of critical biomolecules besides exhibiting superior energy storage performance. © 2024 The Electrochemical Society (“ECS”). Published on behalf of ECS by IOP Publishing Limited. All rights, including for text and data mining, AI training, and similar technologies, are reserved.
  • No Thumbnail Available
    Item
    Dual storage mechanism of Bi2O3/Co3O4/MWCNT composite as an anode for lithium-ion battery and lithium-ion capacitor
    (Elsevier B.V., 2024) Lakshmi Sagar, G.; Brijesh, K.; Mukesh, P.; Hegde, A.P.; Kumar, A.; Kumar, A.; Bhat, K.S.; Nagaraja, H.S.
    Bismuth oxide(Bi2O3) and cobalt oxide(Co3O4) are promising owing to their unique properties, high storage capacity, low cost, and eco-friendliness, making them ideal for lithium-ion batteries(LIBs) and lithium-ion capacitors(LICs) anodes. This study presents the synthesis and thorough characterization of Bi2O3/Co3O4 and Bi2O3/Co3O4/MWCNT composites as potential LIB and LIC anode materials. The materials are synthesized using a hydrothermal process succeeded by annealing. Structural, morphological, and compositional studies were analyzed. Various tests evaluated electrochemical performance, including cyclic voltammetry(CV), confirming a dual storage mechanism like alloying and conversion reaction involved for better energy storage. Specific discharge capacities of 834 mAh/g and 1184 mAh/g were recorded for Bi2O3/Co3O4 and Bi2O3/Co3O4/MWCNT composite electrodes at a current density of 100 mA/g, respectively. The composite material exhibited notably enhanced rate capability, with 31 % and 51 % discharge capacities for Bi2O3/Co3O4 and Bi2O3/Co3O4/MWCNT, respectively. The cyclic stability assessment revealed that Bi2O3/Co3O4 and Bi2O3/Co3O4/MWCNT maintained a high coulombic efficiency of around 99 % over 250 charge–discharge cycles at a high current density of 1 A/g. The capacity retention was approximately 253 mAh/g for Bi2O3/Co3O4 and 439 mAh/g for the Bi2O3/Co3O4/MWCNT composite, indicating excellent cyclic stability and minimal energy loss during cycling. Moreover, the LICs assembly of Bi2O3/Co3O4/MWCNT//CB was investigated, revealing a power density of 200 W kg?1 alongside an energy density of 8.64 Wh kg?1. The cyclic stability assessment over 10,000 cycles exhibits a capacity retention of approximately 45 % under a high current density of 2 A/g. © 2024 Elsevier B.V.
  • No Thumbnail Available
    Item
    A study on the influence of geometric coordination of cobalt ions on the structural, physical and optical properties of borosilicate glass
    (Elsevier Ltd, 2025) Raghuvanshi, V.; Rashmi, R.; Ingle, A.; Shashikala, H.D.; Nagaraja, H.S.
    This work explores the synthesis and characterization of cobalt oxide-added borosilicate glass using the melt-quenching technique. The glass system was investigated using various methods, including X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), density measurements, UV–vis spectroscopy, photoluminescence, and electron paramagnetic resonance (EPR) spectroscopy. XRD validated the glass's amorphous nature, while FTIR results indicated significant bonding alterations, showing a transition from BO3 to BO4 units and from B3-O-Si to B4-O-Si linkages. The increased glass density further supported the formation of BO4 units. XPS analysis verified the presence of Co2+ and Co3+ ions within the glass matrix. Optical absorption studies revealed distinct electronic transitions for Co2+ ions in both tetrahedral and octahedral coordination, and for Co3+ ions in octahedral coordination, which was corroborated by EPR spectroscopy. The paramagnetic nature of Co2+ ions was analyzed, and the g-value was determined using X-band frequency. The study also noted the narrowing of the indirect band gap with the rise in the content of Co3O4, and the examination of the metallization criterion suggested a potential metallic nature for the synthesized glasses. Notably, the 0.05 mol% Co3O4-added sample exhibited a 48 % transmission rate and the highest emission, highlighting its potential as an optical bandpass filter. These findings underscore the versatility and tunability of cobalt oxide-added borosilicate glass for various optical technologies. © 2024 Elsevier Ltd and Techna Group S.r.l.