Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
42 results
Search Results
Item Third-order optical nonlinear studies of Cobalt (II) Schiff base complex bearing triphenylphosphine using Differential Optical Kerr Gate and Z-scan studies(2010) Rudresha, B.J.; Badekai Ramachandra, B.; Ramakrishna, D.; Anthony, J.K.; Rotermund, F.The third-order optical nonlinearity of the composite film of coordination complex [CoLPPh3Cl] (L = N-(2-pyridyl)-N?-(salicylidene)hydrazine) and PMMA has been investigated by using Differential Optical Kerr Gate (DOKG) and Z-scan measurements. Large value of the third-order nonlinear optical susceptibility (?(3)) of the order of 10-10 esu was measured and its nonlinear response time was found to be faster than or comparable to the laser pulse width (90 fs) used. The single beam Z-scan technique was used to investigate the nonlinear absorption property of the composite near 800 nm. The sample exhibit saturable absorption. The nonlinear absorption coefficient of sample is found to be -32 cm/GW. © 2010 Elsevier B.V. All rights reserved.Item Synthesis and characterization of schiff base metal complexes and reactivity studies with malemide epoxy resin(Korean Chemical Society sunlee@kcsnet.or.kr, 2012) Lakshmi, B.; Shivananda, K.N.; Prakash, G.A.; Isloor, A.M.; Mahendra, K.N.A novel malemide epoxy containing Co(II), Ni(II) and Cu(II) ions have been synthesized by curing malemide epoxy resin (MIEB-13) and Co(II), Ni(II) and Cu(II) complexes of macrocyclic bis-hydrazone Schiff base. The Schiff base was synthesized by reacting 1,4-dicarbnyl phenyl dihydrazide with 2,6-diformyl-4-methyl phenol. The Schiff base and its Co(II), Ni(II) and Cu(II) complexes have been characterized by elemental analyses, spectral (IR, 1H NMR, UV-vis., FAB mass, ESR), thermal and magnetic data. The curing reaction of maleimide epoxy compound with metal complexes was studied as curing agents. The stability of cured samples was studied by thermo-gravimetric analyses and which have excellent chemical (acid/alkali/solvent) and water absorption resistance. Further, the scanning electron microscopy (SEM) and definitional scanning colorimetric (DSC) techniques were confirmed the phase homogeneity of the cured systems.Item Magnetic domain studies of cobalt nanostructures(2012) Nagaraja, H.S.; Nagaraja, K.K.; Rossignol, F.; Dumas-Bouchiat, F.; Champeaux, C.; Catherinot, A.The pulsed laser deposition technique associated with a low energy cluster beam is used to deposit cobalt thin films with a thickness 100-200 nm and cobalt dots of a diameter 100-200 nm on silicon substrates. The deposited thin films of Co are composed of clusters of a size 10- 50 nm, with very few large grains as revealed by atomic force microscopy. The observations performed by magnetic force microscopy on as-grown thin films reveal randomly distributed out-of-plane magnetic domain structures. These magnetic domains are aligned linearly by applying an external magnetic field either perpendicular or parallel to the substrate during the deposition. In addition, the effect of film thickness and roughness on multidomains is reported. The increase of roughness resulted in the decrease of magnetic domain width from 200 to 100 nm. This decrease is accompanied by the appearance of instability in the stripe domain pattern. Well separated cobalt dots of diameter in the range of 100-200 nm are also deposited on silicon substrates, which show arc-like multidomains. The domains seem to be oriented along the long axis of the dots. The domain structure of Co nanodots is similar to that of Co thin films indicating strong magnetic coupling of clusters. © Springer Science+Business Media, LLC 2012.Item Morphological and structural characterisation of sol-gel electrospun Co3O4 nanofibres and their electro-catalytic behaviour(Royal Society of Chemistry, 2015) George, G.; Elias, L.; Hegde, A.C.; Anandhan, S.Evolution of hydrogen and oxygen are a crucial part of many renewable energy systems. The replacement of the essential and expensive components in such systems can reduce the capital cost and improve the effectiveness of those systems. In this study, Co3O4 nanofibres were fabricated from sol-gel assisted electrospun poly(styrene-co-acrylonitrile)/cobalt acetate tetrahydrate precursor composite fibres. The morphological and compositional features of the Co3O4 nanofibres obtained after calcination of the precursor nanofibers were studied using scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. The results of X-ray diffraction study and Raman spectroscopy revealed that the average grain size of the fibres increased with the calcination temperature. Clear evidence of defects in the fibres was observed in ultraviolet-visible-near infrared and energy dispersive spectroscopic measurements. The electrocatalytic behaviour of Co3O4 nanofibres obtained at different calcination temperatures was studied using them for the water splitting reaction in an alkaline medium. The maximum efficiency in the hydrogen evolution reaction was achieved using the Co3O4 nanofibres obtained at the lowest calcination temperature, which had the highest surface area and the smallest grain size. © The Royal Society of Chemistry 2015.Item Cobalt pincer complex catalyzed Suzuki-Miyaura cross coupling – A green approach(Elsevier B.V., 2017) Kumar, L.M.; Badekai Ramachandra, B.A series of cobalt complexes with tridentate pincer ligands were synthesized to study their catalytic activity in Suzuki-Miyaura coupling reactions. Cobalt complexes, C-1, C-2, C-3 bearing asymmetrical PNCOP pincer ligand [C6H4-1-(NHPPh2)-3-(OPPh2)] (L-1) and symmetrical PNCNP, PNNNP pincer ligands [C6H4-2,6-(NHPPh2)2] (L-2) and [C5H3N-2,6-(NHPPh2)2] (L-3) were synthesized by the reaction of diphenylchlorophosphine with m-aminophenol, m-phenylenediamine and 2,6-diaminopyridine respectively in a 1:2 ratio in the presence of triethylamine as a base and tetrahydrofuran as solvent media. The synthesized complexes were examined for their C-C coupling efficiency in cross-coupling between phenyl boronic acid and para substituted bromobenzenes. Effect of variation of the ligand on the catalytic activity of cobalt pincer complex was explored based on the coupling yields. It is observed that as the number of ‘N’ atoms increases in the side arm of the ligand, the donating ability of the ligand increases which leads to the increased catalytic activity of the complex. The symmetrical PNNNP pincer complex (C-3) was found to be more effective as a catalyst among the complexes synthesized and reported in the present study. © 2016 Elsevier B.V.Item Air-Stable Cobalt(II) and Nickel(II) Complexes with Schiff Base Ligand for Catalyzing Suzuki–Miyaura Cross-Coupling Reaction(Pleiades journals, 2018) Ansari, R.M.; Kumar, L.M.; Badekai Ramachandra, B.R.The Co(II) complex [Co{C6H4–1,2-(N=CH–C6H4O)2}] (I) and Ni(II) complex [Ni{C6H4–1,2-(N=CH–C6H4O)2}] (II) with Schiff base of o-phenylenediamine and salicylaldehyde have been synthesized. The structure of the ligand and its complexes were derived on the basis of various techniques such as elemental analysis, mass, FT-IR, electronic spectra and magnetic susceptibility. From the Singal crystal X-ray diffraction (SCXRD) analysis techniques (CIF file CCDC no. 1498772 (II)), it has been confirmed that the Schiff base ligand (L), coordinates to the metal ion in a tetradentate fashion through the nitrogen and oxygen atom. In addition, the square planar geometry of Ni(II) complex also has been confirmed from SCXRD. Electronic spectra, mass spectra, and magnetic susceptibility measurements reveal square planar geometry for the Co(II) complex. Synthesized complexes were used in cross-coupling of arylhalides with phenylboronic acid. The transformation offers products in good yields using 0.02 mmol catalysts loading, thereby proving the efficiency of the complexes as catalysts for Suzuki–Miyaura reaction. © 2018, Pleiades Publishing, Ltd.Item Investigation of the effect of BaTiO3/CoFe2O4 particle arrangement on the static response of magneto-electro-thermo-elastic plates(Elsevier Ltd, 2018) Mahesh, M.; Kattimani, S.In this article, a framework based on finite element (FE) methods is proposed for predicting the influence of spatial arrangement of two phase Barium Titanate (BaTiO3) and Cobalt Ferric Oxide (CoFe2O4) particulate composites on the static response of magneto-electro-thermo-elastic (METE) plates. The coupled material properties such as piezoelectric, piezomagnetic, dielectric, magnetic permeability, thermal expansion and pyro co-efficients vary significantly with the spatial arrangement of BaTiO3/CoFe2O4 particulates. The coupled FE governing equations accounting the effect of particle arrangement is presented by incorporating linear coupled constitutive equations of METE composites. Through the condensation technique, the governing equations of METE plates are solved to obtain direct (thermal displacements, electric and magnetic potentials) and derived quantities (stresses, electric displacements and magnetic flux densities). A special attention has been placed on evaluating the pyro-electric and pyro-magnetic coupling effects for different packing arrangement considered namely, Body Centered Cubic (BCC), Face Centered Cubic (FCC) and Simple Cubic (SC) METE particulate composites. Further, parametric studies are carried out to analyse the influence of boundary conditions and aspect ratio. The present study reveals that the multiphysics response of METE plates changes significantly with the packing arrangements of BaTiO3/CoFe2O4 particulates and geometrical parameters. It is believed that the obtained solutions would provide insights into design aspects of METE structures. © 2017 Elsevier LtdItem Vibration control of multiferroic fibrous composite plates using active constrained layer damping(Academic Press, 2018) Kattimani, S.; Ray, M.C.Geometrically nonlinear vibration control of fiber reinforced magneto-electro-elastic or multiferroic fibrous composite plates using active constrained layer damping treatment has been investigated. The piezoelectric (BaTiO3) fibers are embedded in the magnetostrictive (CoFe2O4) matrix forming magneto-electro-elastic or multiferroic smart composite. A three-dimensional finite element model of such fiber reinforced magneto-electro-elastic plates integrated with the active constrained layer damping patches is developed. Influence of electro-elastic, magneto-elastic and electromagnetic coupled fields on the vibration has been studied. The Golla–Hughes–McTavish method in time domain is employed for modeling a constrained viscoelastic layer of the active constrained layer damping treatment. The von Kármán type nonlinear strain-displacement relations are incorporated for developing a three-dimensional finite element model. Effect of fiber volume fraction, fiber orientation and boundary conditions on the control of geometrically nonlinear vibration of the fiber reinforced magneto-electro-elastic plates is investigated. The performance of the active constrained layer damping treatment due to the variation of piezoelectric fiber orientation angle in the 1–3 Piezoelectric constraining layer of the active constrained layer damping treatment has also been emphasized. © 2018 Elsevier LtdItem Biosynthesis of cobalt oxide nanoparticles using endophytic fungus Aspergillus nidulans(Academic Press, 2018) Vijayanandan, A.S.; Mohan Balakrishnan, R.M.Metallic oxide nanoparticles have profound applications in electrochemical devices, supercapacitors, biosensors and batteries. Though four fungi were isolated from Nothapodytes foetida, Aspergillus nidulans was found to be suitable for synthesis of cobalt oxide nanoparticles, as it has proficient tolerance towards metal under study. The broth containing precursor solution and organism Aspergillus nidulans had changed from pink to orange indicating the formation of nanoparticles. Characterization by x-ray diffraction analysis (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR) and energy dispersive x-ray analysis (EDX) confirmed the formation of spinel cobalt oxide nanoparticles at an average size of 20.29 nm in spherical shape with sulfur-bearing proteins acting as a capping agent for the synthesized nanoparticles. The nanoparticles could be applied in energy storage, as a specific capacitance of 389 F/g showed competence. The study was a greener attempt to synthesize cobalt oxide nanoparticles using endophytic fungus. © 2018 Elsevier LtdItem A Mechanistic Study on the Structure Formation of NiCo2O4 Nanofibers Decorated with In Situ Formed Graphene-Like Structures(Springer New York LLC barbara.b.bertram@gsk.com, 2018) Kumar, B.; Gudla, V.C.; Ambat, R.; Kalpathy, S.K.; Anandhan, S.Nickel cobaltite (NCO) nanofibers were synthesized using poly(styrene-co-acrylonitrile) (SAN) as the polymeric binder through sol–gel assisted electrospinning. Defect-free precursor nanofiber mats were pyrolyzed at 773 K at three different pyrolysis soaking times t = 2, 4, and 6 h. The SAN present in the precursor nanofibers caused morphological changes in the NCO nanofibers during their thermochemical degradation. Consequently, fractal aggregates of NCO nanoparticles were formed along the length of the nanofibers. X-ray photoelectron spectroscopy (XPS) revealed both + 2 and + 3 oxidation states for Ni and Co, with spinel crystal defects due to oxygen rich atmosphere. XPS, high-resolution transmission microscopy, and optical analysis showed graphene-like structures embedded within the NCO nanofibers. With increase in pyrolysis soaking time, the morphology of the NCO particles markedly changed from spherical to rod-like. We propose a mechanism for the morphological change of NCO nanoparticles on the basis of crystallite splitting accompanied by particle splitting and reordering. © 2018, Springer Science+Business Media, LLC, part of Springer Nature.