Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
5 results
Search Results
Item Production of novel cell-associated tannase from newly isolated Serratia ficaria DTC(2010) Belur, P.D.; Gopal, M.; Nirmala, K.R.; Nainegali, N.Five strains of tannic acid degrading bacteria were isolated and identified by phenotypic characterization. All the five isolates showed cell-associated activity, whereas only three showed extracellular activity. Serratia ficaria DTC, showing the highest cell-associated activity (0.29 U/l), was selected for further shake-flask studies. Tannase synthesis was growth associated and reached the peak in the late stationary phase of growth. Organic nitrogen sources enhanced the tannase production. Peak tannase production of 0.56 U/l was recorded in the medium having the initial pH of 6. The pH and temperature optima of the enzyme were found to be 8.9 and 35°C, respectively. This is the first report of cell-associated activity in the case of bacterial tannase. Cell-associated tannase of Serratia ficaria DTC could be industrially important from the perspective of its activity at broad temperature and pH ranges, and its unusually high activity at pH 8.9. © The Korean Society for Microbiology and Biotechnology.Item Optimization of culture medium for novel cell-associated tannase production from bacillus massiliensis using response surface methodology(2012) Belur, P.D.; Goud, R.; Goudar, D.C.Naturally immobilized tannase (tannin acyl hydrolase, E.C. 3.1.1.20) has many advantages, as it avoids the expensive and laborious operation of isolation, purification, and immobilization, plus it is highly stable in adverse pH and temperature. However, in the case of cell-associated enzymes, since the enzyme is associated with the biomass, separation of the pure biomass is necessary. However, tannic acid, a known inducer of tannase, forms insoluble complexes with media proteins, making it difficult to separate pure biomass. Therefore, this study optimizes the production of cell-associated tannase using a "protein-tannin complex" free media. An exploratory study was first conducted in shake-flasks to select the inducer, carbon source, and nitrogen sources. As a result it was found that gallic acid induces tannase synthesis, a tryptose broth gives higher biomass, and lactose supplementation is beneficial. The medium was then optimized using response surface methodology based on the full factorial central composite design in a 3 l bioreactor. A 2 3 factorial design augmented by 7 axial points (? = 1.682) and 2 replicates at the center point was implemented in 17 experiments. A mathematical model was also developed to show the effect of each medium component and their interactions on the production of cell-associated tannase. The validity of the proposed model was verified, and the optimized medium was shown to produce maximum cell-associated tannase activity of 9.65 U/l, which is 93.8% higher than the activity in the basal medium, after 12 h at pH 5.0, 30°C. The optimum medium consists of 38 g/l lactose, 50 g/l tryptose, and 2.8 g/l gallic acid. © The Korean Society for Microbiology and Biotexhnology.Item Production of propyl gallate in nonaqueous medium using cell-associated tannase of Bacillus massiliensis: Effect of various parameters and statistical optimization(2013) Aithal, M.; Belur, P.D.Enzymatic synthesis of propyl gallate in an organic solvent was studied using cell-associated tannase (E.C. 3.1.1.20) of Bacillus massiliensis. Lyophilized biomass showing tannase activity was used as a biocatalyst. The influence of buffer pH and strength, water activity, temperature, biocatalyst loading, gallic acid concentration, and 1-propanol concentration was studied by the one-factor-at-a-time method. Subsequently, response surface methodology was applied based on a central composite design to determine the effects of three independent variables (biocatalyst loading, gallic acid concentration, and 1-propanol concentration) and their mutual interactions. A total of 20 experiments were conducted, and a statistical model was developed, which predicted the maximum propyl gallate yield of 20.28 ?g/mL in the reaction mixture comprising 40.4 mg biocatalyst, 0.4 mM gallic acid, and 6.52 % (v/v) 1-propanol in 9.5 mL benzene at 30°C. The subsequent verification experiments established the validity of the model. Under optimal conditions, 25% conversion of gallic acid to propyl gallate was achieved on a molar basis. The absence of the need for enzyme purification and subsequent immobilization steps and good conversion efficiency makes this enzyme system an interesting one. Reports on the applications of bacterial whole cell systems for synthetic reactions in organic solvents are scarce, and perhaps this is the first report on bacterial cell-associated tannase-mediated esterification in a nonaqueous medium. © 2013 International Union of Biochemistry and Molecular Biology, Inc.Item Enhancement of propyl gallate yield in nonaqueous medium using novel cell-associated tannase of bacillus massiliensis(2013) Aithal, M.; Belur, P.D.Enzymatic synthesis of propyl gallate in organic solvent was studied using cell-associated tannase (EC 3.1.1.20) of Bacillus massiliensis. Lyophilized biomass showing tannase activity was used as the biocatalyst. The effects of solvent, surfactant treatment, and bioimprinting on the propyl gallate synthesis were studied and subsequently optimized. Among various solvents, benzene followed by hexane was found to be the most favorable. Treatment of the biocatalyst with Triton X-100 at a lower concentration (0.2% w/v), before lyophilization, increased the propyl gallate yield by 24.5% compared to the untreated biocatalyst. The biocatalyst was imprinted with various concentrations of gallic acid and tannic acid. Biocatalyst imprinted with tannic acid showed 50% enhancement in the propyl gallate yield compared to the non-imprinted biocatalyst. © 2013 Taylor & Francis Group, LLC.Item Production of tannase from a newly isolated yeast, Geotrichum cucujoidarum using agro-residues(Taylor and Francis Ltd., 2024) Thangavelu, N.; Jeyabalan, J.; Veluchamy, A.; Belur, P.D.With an aim of producing commercially important tannase enzyme using cheap and readily available agro-residues, leaves of Indian Gooseberry (Phyllanthus emblica) and Jamun (Syzygium cumini), peels of Lemon (Citrus limon), and Pomegranate (Punica granatum) were screened. Newly isolated Geotrichum cucujoidarum was utilized for the study. Preliminary studies indicated that tannase titer obtained is not proportional to the tannin content of the agro-residues and solid state fermentation superior compared to submerged fermentation. Jamun mixed with lemon peel in equal proportion supplemented with minerals under solid-state fermentation gave a tannase titer of 15.46 U/g dry solids. Through successful implantation of Plackett–Burman design, yeast extract concentration, inoculum volume, and amount of substrate were found to be the most significant factors. Further optimization of these three factors through Response Surface Methodology resulted in the 1.7-fold increase in tannase titer. Validation experiments using 3.97 g of Jamun leaves + lemon peel powder mixed with a nutrient solution having (w/v) yeast extract − 1.1%, dextrose − 3%, Urea − 1.125%, potassium chloride − 0.1%, magnesium sulfate heptahydrate − 0.1% with the initial pH of 5, inoculated with 2.48 ml of inoculum gave a tannase titer of 26.43 U/g dry solids after 6 days of solid-state fermentation. © 2023 Taylor & Francis Group, LLC.