Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
33 results
Search Results
Item Flexible binder free functionalized carbon nanotube electrodes for ultracapacitor(SPIE spie@spie.org, 2014) Badekai Ramachandra, B.R.; Aravinda, L.S.; Bhat, K.U.The Flexible supercapacitor electrode material was prepared by simple spray coating technique. This will provide a greener alternative for the fabrication of binder free composite electrode for supercapacitor applications. A symmetric double layer super capacitor stack was fabricated by using flexible electrodes. The investigation of the capacitance property of the fabricated super capacitor stack was investigated using cyclic voltammetry, chronopotentiometry and electrical impedance spectroscopy studies. The flexible electrode material shows a specific capacitance of 50 Fg-1 with good cyclibility. © 2014 SPIE.Item Carbon nanotube- and graphene-based advanced membrane materials for desalination(Springer Verlag, 2017) Hebbar, R.S.; Isloor, A.M.; Siddique, I.; Asiri, A.M.The development of membrane-based desalination and water purification technologies offers new alternatives to meet the global freshwater demand. Rapid advancement in carbon nanotube-based and graphene-based nanomaterials has drawn the attention of scientific investigators on various desalination technologies. These nanomaterials indeed offer advantageous structure, size, shape, porosity and mass transport behavior for membrane separation process. This article reviews theoretical and experimental investigations of carbon nanotube- and graphene-based composite materials for desalination. Special attention is given to the simulation of molecular transport through these materials. Further, recent advances in the application of functionalization of carbon nanotube- and graphene-based materials for salt rejection and hydraulic permeation properties are discussed. © 2017, Springer International Publishing AG.Item A review on adsorptive removal of oil pollutants (BTEX) from wastewater using carbon nanotubes(Elsevier B.V., 2019) Anjum, H.; Johari, K.; Francisco Nirmala, N.; Ganesapillai, M.; Arunagiri, A.; Iyyaswami, R.; Murugesan, M.A progressive economic growth and proliferating global population caused adequate provision of clean water as a global issue. The systematic eradication of toxic pollutants from the environment has become a predominant matter from a biological and environmental perspective. Thus, adsorptive removal of hazardous components from wastewater is one of the most captivating strategies for purification technologies. Recently, carbon nanotubes (CNTs) have been reported to be very promising in the adsorption of various stable organic compounds due to their unique properties essential for further surface modification. In order to get the maximum removal of these pollutants, it is mandatory to understand the interaction mechanisms between the sorbent and sorbate. This review summarizes the recent literature on the adsorptive removal of BTEX from wastewater using CNTs. The impact of various factors (sorption sites of CNTs, physical properties of nanotubes, properties of background solution, and surface chemistry of CNTs) on the adsorption of BTEX over CNTs and the plausible interaction mechanisms such as hydrophobic interaction, electrostatic interaction, dispersive/repulsive interactions, π-π interactions and hydrogen bonding are critically reviewed. The present review has sorted out numerous prevailing gaps in the available information whilst recognizing a number of encouraging avenues and approaches for the upcoming research thrust. © 2018 Elsevier B.V.Item Machining characteristics of multiwall-CNT reinforced Al/Al-Si composites using recurrence quantification analysis(2011) Gangadharan, K.V.; Umashankar, K.S.; Ravish; Desai, V.Aluminium (Al)/Aluminium alloy composites are emerging as very promising materials, especially in the fields of aerospace and automotive for their various attractive and technically demanding properties. Discontinuously reinforced aluminium metal matrix composites with reinforcements as nanoparticles of ceramics in general and carbon nanotubes in particular have emerged as the forerunner for a variety of general and special engineering and structural applications. In many of the fields where these materials find applications, machining is invariably required for getting correct geometries, dimensions and surface finish of the components. Hence, establishing the machining characteristics of these materials in terms of the deterministic nature of dynamic signals such as cutting force signals and vibration signals is very important and sought after. Machining process has been understood to be nonlinear and chaotic in nature. In this paper a relatively new technique called Recurrence Plots (RP) and Recurrence Quantification Analysis (RQA), a tool to analyse nonlinear and chaotic systems, is used to study the machining characteristics of cast and powder metallurgy Al and Al-Si alloys (LM6 and LM25), CNT reinforced Al/Al-Si composites produced by powder metallurgy route. Cutting force signals were sensed, acquired and analysed using RQA technique. Determinism (DET), which is one of the variables of RQA, indicates the determinism present in a signal. The values of DET were used to compare the machining characteristics. For all the three materials the deterministic nature of the cutting force signal was highest when reinforced with 0.5 weight percentage CNT, followed by respective base alloys produced by powder metallurgy method and casting route. © 2011 Jordan Journal of Mechanical and Industrial Engineering.Item Multi-walled carbon nanotube bound nickel Schiff-base complexes as reusable catalysts for oxidation of alcohols(2012) Rajarao, R.; Kim, T.H.; Badekai Ramachandra, B.R.Nickel salen and salophen complexes have been covalently anchored on multi-walled carbon nanotubes (MWNTs). The MWNT-supported nickel complexes have been characterized by inductive coupled plasma spectroscopy, FT-IR spectroscopy, UV-Vis spectrophotometry, transmission electron microscopy, and X-ray diffraction. The catalytic performance for the oxidation of primary and secondary alcohols was evaluated using periodic acid as oxidant. Reaction conditions have been optimized for MWNT-supported salen and salophen complexes by considering the effect of parameters such as solvent, reaction time, concentration of catalyst, amount of oxidant, etc. The catalytic activity was higher for supported catalysts than similar homogeneous ones. These supported catalysts were highly stable and reused several times without the loss of catalytic activity. © 2012 Taylor & Francis.Item ZnO/carbon nanotube nanocomposite for high energy density supercapacitors(2013) Aravinda, L.S.; Nagaraja, K.K.; Nagaraja, H.S.; Bhat, K.; Badekai Ramachandra, B.A facile, green and highly efficient method for the decoration of carbon nanotubes with ZnO was developed for the fabrication of binder-free composite electrode for supercapacitor applications. The nano composite was prepared by using reactive magnetron sputtering in Ar/O2 environment. This approach leads to more uniform coating with tuneable thickness, which alters the electrochemical performance of the nano composite electrodes. The structure and surface morphology of the composite film have been studied by means of X-ray diffraction (XRD) analysis, scanning electron microscopy and field emission scanning electron microscopy (FESEM). The XRD study reveals the formation of Wurtzite ZnO structure. The electrochemical performance of nano composite electrode was investigated using cyclic voltammetry, chronopotentiometry and electrochemical impedance measurements in non-aqueous electrolyte. The nano composite electrode shows significant increase in the specific capacitance up to 48 F g-1 with an energy density 13.1 Wh kg-1 in the potential range -2 V to 1 V. © 2013 Elsevier Ltd. All rights reserved.Item Comparison of structural health assessment capabilities in epoxy - Carbon black and epoxy - Carbon nanotube nanocomposites(2014) Inam, F.; Badekai Ramachandra, B.; Luhyna, N.; Vo, T.A novel method for comparing structural health of different types of brittle epoxy nanocomposites filled with carbon nanostructured fillers is presented. Epoxy - 0.2 vol% carbon black (CB) and epoxy - 0.2 vol% carbon nanotube (CNT) nanocomposite bars were prepared by calendering and thermal curing. Nanocomposite bars were subjected to Vickers diamond indentation to produce sub-surface damage. Electrical conductivities were analysed by 4-point method to estimate the structural damage caused by indentation. For comprehensive comparison, fracture toughness and percolation threshold were analysed as well. Because of the systematically induced indentation damage, a sharp decrease of 89% was observed in the electrical conductivity of epoxy - CNT nanocomposite as compared to 25% in the electrical conductivity of epoxy - CB nanocomposite. CNTs impart superior damage sensing capability in brittle nanocomposite structures, in comparison to CB, due to their high aspect ratio (fibrous nature) and high electrical conductivity. © BME-PT.Item Structural health monitoring capabilities in ceramic-carbon nanocomposites(2014) Inam, F.; Badekai Ramachandra, B.R.; Vo, T.; Daoush, W.M.A novel method for analysing structural health of alumina nanocomposites filled with graphene nanoplatelets (GNP), carbon nanotubes (CNTs) and carbon black nano-particles (CB) is presented. All nanocomposites were prepared using novel colloidal processing and then by Spark Plasma Sintering. Good homogeneous dispersion was observed for all carbon filled materials. Nanocomposite bars were indented to produce sub-surface damage. Change in electrical conductivities were analysed after indentation to understand structural damage. For correlating change in electrical conductivity and indentation damage and understanding damage tolerance, mechanical properties were compared. Because of the systematically induced indentation damage, a sharp decrease of 86% was observed in the electrical conductivity of CNT nanocomposite as compared to 69% and 27% in the electrical conductivities of GNP nanocomposites and CB nanocomposites respectively. CNTs impart superior damage sensing capability in alumina nanocomposites, in comparison to GNP and CB, due to their fibrous nature, high aspect ratio and high electrical conductivity. © 2013 Elsevier Ltd and Techna Group S.r.l.Item Multi-wall carbon nanotube-NiO nanoparticle composite as enzyme-free electrochemical glucose sensor(Elsevier, 2015) Prasad, R.; Badekai Ramachandra, B.R.We report a simple, solvent-free method to decorate multi-walled carbon nanotubes (MWCNTs) with nickel oxide nanoparticles (NiO-NPs). The as prepared NiO-MWCNT composite were characterised by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and Raman spectroscopy. The enzyme-free modified carbon paste electrode (CPE) was fabricated using as-synthesised composite material and investigated for glucose sensing. The 10% NiO-MWCNTs composites sensor showed excellent electro-catalytic activity towards direct glucose oxidation. The sensitivity of this sensor is found to be 1696 ?A mM-1 cm-2 and 122.1 ?A mM-1 cm-2 and the limit of detection (LOD) was found to be 11.04 nM and 31 ?M for the linear response over glucose concentration ranging from 1-200 ?M to 0.5-9.0 mM, respectively. Furthermore, the 10% NiO-MWCNTs sensor also showed excellent anti-interference ability, high stability and good reproducibility. Hence, due to simple method of material preparation, easy sensor fabrication and excellent electro catalytic activity towards glucose oxidation, the 10% NiO-MWCNT/CPE is a potential material for the development of enzyme-free sensor for reliable glucose determination. © 2015 Elsevier B.V. All rights reserved.Item Nickel-oxide multiwall carbon-nanotube/reduced graphene oxide a ternary composite for enzyme-free glucose sensing(Royal Society of Chemistry, 2016) Prasad, R.; Ganesh, V.; Badekai Ramachandra, B.R.We report a solvent-free method of preparation for a NiO-carbon nanotube/graphene ternary composite using nickel formate as a green precursor via a thermal decomposition method. In this ternary composite, NiO with an average particle size of 7 nm is regularly decorated on the surfaces of conductive carbon matrix networks such as MWCNTs and reduced graphene oxide (rGO). Here rGO serves as an ideal support for the uniform distribution of NiO nanoparticles and also functions as an efficient transducer material, whereas, MWCNTs act as a spacer between rGO, which enhances the electrical conductivity and accessibility of the active reaction sites for direct glucose oxidation. The electrochemical performances were evaluated by cyclic voltammetry and amperometric techniques. Under the optimal conditions, the 20 wt% NiO-MWCNT/rGO/GCE exhibits a sensitivity of 4223.3 ?A cm-2 mM-1 and a detection limit of 0.92 ?M over a linear glucose concentration range up to 19 mM. Furthermore, the constructed sensor is effectively employed to detect glucose in real human blood serum samples with adequate results. The modified 20 wt% NiO-MWCNT/rGO/GCE also shows a high sensitivity, greater selectivity, excellent reproducibility and long-term stability. © 2016 The Royal Society of Chemistry.