Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Search Results

Now showing 1 - 5 of 5
  • Item
    Effect of curbside bus stops on passenger car units and capacity in disordered traffic using simulation model
    (Taylor and Francis Ltd., 2022) Raj, P.; Asaithambi, G.; Ravi Shankar, A.U.
    Representation of traffic in terms of Passenger Car Unit (PCU) is imperative to estimate capacity in disordered traffic. Many studies have been conducted on investigation of impacts of traffic and geometric conditions on traffic characteristics and PCUs. However, the sensitivity of PCUs due to roadside frictions are not adequately studied. To address this gap, this study aims to estimate PCU values for vehicles under the influence of curbside bus stop, which is the most common roadside friction in developing countries. Lack of space for providing exclusive bus bays and higher demand for public transport buses in urban roads justify the need for this study. Methodology of this study involves development and validation of a microscopic simulation model to quantify the impact of curbside bus stop on PCU as well as capacity. The results indicate the significant differences in PCU values due to the presence of curbside bus stop with varying traffic volume and composition. © 2020 Informa UK Limited, trading as Taylor & Francis Group.
  • Item
    Investigating bus stops' influence on saturation flow at signalized intersections in heterogeneous traffic
    (Aracne Editrice, 2022) Shubhashree, K.S.; Mohan, M.
    The public transportation system efficiently reduces congestion and pollution as they lessen the dependency on personalized modes. However, most bus stops are located close to the intersection, and the stopping buses often create a bottleneck. At signalized intersections, this will seriously impact the saturation flow as it hinders the efficient functioning of the traffic signal system, resulting in delays and reduction of the intersection's capacity. Hence, a profound understanding of the factors associated with bus stoppages, which influence the saturation flow, is essential in designing efficient signalized intersections. This study simulates traffic flows at signalized intersections in heterogeneous traffic in a micro-simulation software VISSIM. Results of multiple simulation run indicated that saturation flow at intersections depends on the percentage of buses in the vehicular mix, the distance of bus stop from the stop line, and percentages of right and left-turning traffic. Further, the study proposes separate saturation flow models for upstream and downstream bus stop conditions. These could be used to optimally place bus stops near the intersection such that it does not hamper the performance of the intersection while not causing any undue discomfort to the bus passengers. © 2022, Aracne Editrice. All rights reserved.
  • Item
    Application of Public Transit AVL Data for Evaluation of Delay Variability
    (Institute for Transport Studies in the European Economic Integration, 2023) Harsha, M.M.; Mulangi, R.H.; Panditharadhya, B.J.
    The travel time is the significant factor in evaluating efficiency and performance of public transit system. A greater percentage of travel time is accounted by bus stop delays which depends on passenger count, bus stop characteristics, traffic condition, bus performance, etc. Many of the Indian transit agencies store the passenger details stage wise not stop wise, which makes it difficult to evaluate delay variability at bus stop level. In this connection, Automatic Vehicle Location (AVL) data from Intelligent Transport System (ITS) implemented at Mysore, India is considered for evaluating bus stop delay variability. The collected data is used for estimating delay at five stops by adopting trajectory-based formulation. The probability distributions have been utilized to model the variability in delay. The performance has been analysed using Kolmogorov-Smirnov (KS) test. The daily variability of delay at bus stops has been evaluated using Coefficient of Variation (COV). The results of the performance evaluation of delay distributions show that the Generalized Extreme Value (GEV) distribution is the best descriptor of the delay variability in terms of accuracy, robustness, and survival capacity. In the absence of passenger data collection systems, method of evaluation of delay using AVL data presented in this study is helpful. © 2023 Institute for Transport Studies in the European Economic Integration. All rights reserved.
  • Item
    Modelling personal safety perceptions at bus stop: employing hierarchical confirmatory factor analysis and structural equation approach
    (Aracne Editrice, 2023) Sethulakshm, G.; Mohan, M.
    Vehicle-pedestrian interactions occurring within a limited space are quite common at bus stops, making it essential to comprehend passengers' perception of safety near bus stops. Since the sense of perceived safety is subjective, developing a standardized tool to measure travellers' perception of safety, especially of bus users, is complex. The first part of this study aims to identify the indicators for measuring the perceived safety at bus stops, and the second part focuses on modelling the overall perceived safety of users’ at bus stops using structural equation modelling. The research examined the safety factors according to 14 indicators which were further reduced to five latent constructs using exploratory factor analysis. Perceived safety is taken as a second-order latent construct, and the second-order confirmatory factor analysis found that safety derived from five latent variables, namely bus stop facility, bus stop location, bus operator behaviour, other users' behaviour, and pedestrian facility, are potential indicators of overall perceived safety at the bus stop. The results recommend that providing night light facilities, adopting measures to avoid improper stopping of buses and left-side overtaking, avoiding bus stops on curves and junctions, and ensuring better sidewalk facilities could improve perceived safety. Structural equation modelling revealed that safety perceptions are negatively influenced by previous accident victimization and witnessing, age, educational qualification and total household vehicles. The results conclude that female respondents perceive less safety than males, and no effects can be attributed to the frequency of travel and trip length. The research findings will be helpful for the planning agencies to prioritize measures to improve travellers' feeling of safety. © 2023, Aracne Editrice. All rights reserved.
  • Item
    Designing safe and accessible bus stops: an exploration of the interplay between perceived safety at crosswalk and transit ridership
    (Routledge, 2025) Sethulakshmi, G.; Mohan, M.
    Measuring personal safety perception is inherently complex, involving a multifaceted array of factors. This research advances the field of knowledge by developing a novel factor structure to assess pedestrian safety perceptions and modelling overall safety as a latent construct through a second-order Confirmatory Factor Analysis. Data were collected from 568 pedestrian interviews on safety perceptions near bus stops. The study concluded that perceived safety can be measured using four latent constructs: crosswalk infrastructure, crossing environment, management measures, and driver behavior, which collectively contribute to overall crosswalk safety. Using Structural Equation Modelling, the study confirms that as perceived safety while accessing bus stops via crosswalks decreases, bus ridership also declines. Findings also reveal demographic differences, with women, older individuals, and prior accident victims perceiving bus stop environments as less safe. Results suggest that policymakers should prioritize dedicated crosswalks and control speed and aggressive driving to maximize perceived safety at bus stops. © 2025 Informa UK Limited, trading as Taylor & Francis Group.