Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Subject: search.filters.subject.Brittleness

Search Results

Now showing 1 - 7 of 7
  • No Thumbnail Available
    Item
    Assessment and Prediction of Specific Energy Using Rock Brittleness in Rock Cutting
    (Springer Nature, 2020) Raghavan, V.; Murthy, C.S.N.
    In this study, we used picks with point attack angles of 45°, 50°, 55°, and 65° and 45°, 55°, and 65° attack angles in rock cutting experiments. The main objective is to estimate specific energy during the cutting process based on rock brittleness and study the influence of attack angle on specific energy. From the experimental data, we compared the obtained results using multiple linear regressions and ANOVA to predict the specific energy and found that the model developed were statistically significant. R2 of the brittleness B4 is 0.79 in comparision with R2 of density, UCS, BTS and abrasivity as 0.74, 0.83, 0.84 and 0.73. Specific energy not only be predicted from density, UCS, BTS, abrasivity, it can also be predicted using rock brittleness. © 2020, Springer Nature Switzerland AG.
  • No Thumbnail Available
    Item
    Structural, optical and mechanical properties of ternary CaO-CaF2-P2O5 glasses
    (Tsinghua University, 2014) Venkateswara Rao, G.V.; Shashikala, H.D.
    The ternary phosphate glass series (50?x)CaO-xCaF2-50P2O5 (x = 0–20 mol%) were synthesized using melt quench technique. Structural, optical and mechanical properties were investigated with increase in CaF2 content. Using X-ray diffraction (XRD), synthesized glasses were confirmed to be amorphous in nature. Replacement of oxygen ions by fluorine ions increased the values of density. Decrease in refractive index due to the low polarizability of fluorine ions in the glass matrix was observed. In Fourier transform infrared (FTIR) spectra, the slight variation in ?as (PO2) band position and intensity could be attributed to replacement of fluorine ions for oxygen ions in phosphate glass structure. These data were well supported by Raman spectra. Optical band gap energy increased from 3.44 eV to 3.64 eV with increase in CaF2 content, and Urbach energy decreased suggesting that the fluorine ions reduced the tail energy states in the band gap compared to the oxygen ions. Mechanical parameters such as Vickers hardness, fracture toughness and brittleness were evaluated from the Vickers micro indentation measurements. Increase in Vickers hardness, decrease in fracture toughness and increase in brittleness were observed with increase in CaF2 content. © 2014, The Author(s).
  • No Thumbnail Available
    Item
    Effect of heat treatment on optical, dielectric and mechanical properties of silver nanoparticle embedded CaOCaF2P2O5 glass
    (Elsevier Ltd, 2015) Venkateswara Rao, G.; Shashikala, H.D.
    Silver nanoparticle have been embedded in CaOCaF2P2O5 glass using melt quenching technique. The quenched glasses were heat treated at 550 °C for 10, 20, 30, 40 and 50 h. The growth of silver nanoparticle in the glass matrix appeared to be time dependent. FTIR spectra show that silver nanoparticle formation has not affected the vibration bands of basic phosphate tetrahedral network. The increase in compactness of the glass structure is confirmed by increase in measured density of the glasses with increase in the duration of the heat treatment. Glass containing spherical silver nanoparticle shows the red shift and increase in the full width half maxima (FWHM) of the surface plasmon resonance (SPR) in the visible region with increase in the duration of the heat treatment. X-ray diffraction pattern indicated the presence of Ag crystalline peaks along with amorphous structure on heat treating at 550°C for 50 h. For the glass samples, the increase in dielectric constant and low dielectric loss around 0.005 were observed with increase in duration of the heat treatment. Both Vickers hardness and fracture toughness increased while the brittleness decreased which can be attributed to the increase in size of the nanoparticles in glass matrix. © 2014 Elsevier B.V. All rights reserved.
  • No Thumbnail Available
    Item
    Mechanical properties of Nd3+-doped phosphate laser glasses
    (Society of Glass Technology christine@glass.demon.co.uk, 2015) Venkateswara Rao, G.; Vijaya, N.; Joshi, A.S.; Shashikala, H.D.; Jayasankar, C.K.
    The mechanical properties of P2O5+K2O+BaO+Al2O3+Nd2O3 (PKBANd) glasses were studied using the Vickers indentation technique. The values of Vickers hardness, fracture toughness and brittleness of the glass samples were evaluated. The surface morphology of the indentations were analyzed using scanning electron microscopy. An increase in Vickers hardness, fracture toughness and decrease in brittleness were observed with an increase in Nd2O3 concentration in the phosphate glass matrix. A decrease in the brittleness of the synthesized glass samples was confirmed by scanning electron microscopy of median/radial cracks generated due to Vickers indentation pattern with increase in Nd2O3 concentration.
  • No Thumbnail Available
    Item
    An Investigation on the Influence of Thermal Damage on the Physical, Mechanical and Acoustic Behavior of Indian Gondwana Shale
    (Springer, 2020) Srinivasan, V.; Tripathy, A.; Gupta, T.; Singh, T.N.
    In the present study, the effect of thermal treatment on the physical, mechanical and fracturing behavior of Gondwana shale samples from India was investigated. Acoustic Emission signals were used to identify the changes brought in by temperature variations on the crack damage zones and failure attributes in shale. The results suggested that mechanical parameters such as uniaxial compressive strength, tensile strength (?t), elastic modulus, mode-I fracture toughness (KIC), cohesion, and brittleness index (B1) exhibited a strong negative correlation with thermal damage (Dt). But, the internal angle of friction and brittleness index (B2) showed a reasonable positive relation with thermal treatment. The deformation of the shale was dominated by its clay mineral enrichment, the characteristics of which changed with heating. The intensity of fracturing as observed from acoustic signals was chiefly controlled by the orientation of bedding planes and the degree of thermal treatment. The initiation and propagation of macro-crack were found to be greatly influenced by the degree of thermal damage. Under compression, thermally damaged samples showed similar deformation pattern, while under Brazilian tensile load, the deformation path became inconsistent with increasing temperatures. It was observed that thermal damage in tested shale decreased the layer compaction, which eased the fracturing intensity, thereby reducing the overall strength of the samples. The present investigation concludes that even a slight change of the thermal conditions can substantially alter shale fracturing behavior and failure attributes posing serious safety concerns of deep geo-engineering structures. © 2020, Springer-Verlag GmbH Austria, part of Springer Nature.
  • No Thumbnail Available
    Item
    Mechanical and wetting properties of 25%NiCr-75%Cr2C3 cermet coated on low carbon steel using HVOF thermal spray technique
    (Elsevier B.V., 2021) Amudha, A.; Nagaraja, H.S.; Shashikala, H.D.
    The hydrophobic ceramic–metal composites with enhanced mechanical properties will have longer durability because of the embedded liquid-repellent properties, with low water and salt absorption. In this work, the 25%NiCr-75%Cr2C3 cermet powder has been coated on low carbon steel substrate, using High Velocity Oxy-fuel thermal spray technique. The SEM is employed to analyse the morphological characterization of the coating. The mechanical properties of the 25%NiCr-75%Cr2C3 coating is evaluated using the Vickers micro-indentation technique. The micro-hardness, fracture toughness and brittleness index of the coatings are obtained. Also, the wetting property of the coating in 3.5% NaCl salt solution is investigated using the contact angle measured by sessile drop method. The contact angle of the coating is observed to be hydrophobic in nature with a contact angle of 98.14?. Thus, 25%NiCr-75%Cr2C3 hydrophobic coatings helps in the improvement of brittleness, fracture toughness, and the microhardness. © 2020 Elsevier B.V.
  • No Thumbnail Available
    Item
    Internal damage growth in quasi-brittle fibre-reinforced cementitious materials under cyclic compressive loading
    (Structural Engineering Research Centre, 2023) Vidya Sagar, R.; Basu, D.J.; Suhas Reddy, K.V.; Prathap, Y.; Bhuvaneswari, G.; Sai Keerthi, P.
    This article reports a comparison between the internal damage growth in cementitious materials without fibres and with fibres subjected to elevated amplitude cyclic compressive loading. The damage progression was assessed using ultrasonic testing method and Acoustic Emission (AE) testing. The intricate fracture mechanism in the test specimens causes rise to a higher harmonic generation, which was used as an indicator to the internal damage. The decrement in wave peak amplitude with higher harmonic generation may be regarded as a ‘internal damge growth’ in the deformable solid. The complexity in the fracture mechanism in fibrous cementitious matrix influenced the heterogeneity of the specimen, which is reflected by the steep decrement in the slope of the line plotted using normalized higher harmonic ratio and load. It was observed that the ‘magnitude of the total damage’ developed in plain concrete at the last loading phase was relatively lower than brass coated steel fibre reinforced concrete. This was supported by the damage parameter based on generated AE, where final failure of the specimens preceded an AE avalanche. Therefore, the utilization of a combination of nondestructive testing techniques such as AE and nonlinear ultrasonic testing can offer a more comprehensive understanding of the progression of damage in quasi-brittle cementitious materials. © 2023, Structural Engineering Research Centre. All rights reserved.