Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Subject: search.filters.subject.Bounded domain

Search Results

Now showing 1 - 3 of 3
  • No Thumbnail Available
    Item
    Computational investigation of bounded domain with different orientations using CPCM
    (Elsevier Ltd, 2019) Chavan, S.; Gumtapure, V.; Arumuga Perumal, D.A.
    The present work deals with the composite phase change material (CPCM) of 98% paraffin wax and 2% copper nanoparticle, filled into the bounded domain. Effects of orientation (45° 90° 135° and 180°) with different wall heating conditions (base, left and top wall) are analyzed numerically to understand the flow patterns and interface morphology developed during melting/solidification processes. The melting/solidification mechanism exhibited non-uniform flow patterns and irregular morphology which are dependent on geometrical orientations and different wall heating conditions. The results revealed that the bounded domain with different orientations have significant effect on natural convection current formation. As the orientation changes, the heat transfer rate gets influenced significantly and convection currents amplifies. Top wall heating arrangement of 180° orientation shows competence in achieving better thermal performance. © 2019 Elsevier Ltd
  • No Thumbnail Available
    Item
    Analysis of Fluid Flows in Bounded Domain with Particular Shape of a Cavity using Lattice Boltzmann Method
    (Bentham Science Publishers, 2023) Shetty, V.V.; Balashanker, K.; Arumuga Perumal, A.P.; Patel, V.U.
    The present work numerically models the incompressible, continuous phase, viscous flow of Newtonian fluid flow in a bounded domain of two-dimensional cavity that is driven by walls and contains grooves in the shape of squares on the lower wall. With the help of the mesoscopic lattice Boltzmann method (LBM) and D2Q9 square lattice model, simulation results are found stable and reliable. The flow physics of the problem by varying Reynolds number, the height and quantity of lower wall grooves, and other fluid flow characteristics within the bounded domain are studied in detail. It is seen that the effects of the groove heights and wavelengths on the fluid flow are structured within the bounded domain. The study is performed from low Re = 100 to high Re = 3200, with minimum two and maximum four-wavelength grooves evaluated on the bottom surface, each having a height of low 0.25 and high 0.75. Additionally, a thorough discussion of complicated vortex dynamics is provided regarding the input parameters and geometry. Objective: The current study aims to use mesoscopic LBM to analyze incompressible viscous fluid flows on complex geometries other than rectangular shapes. Methods: Mesoscopic approach of kinetic theory-based Lattice Boltzmann method (LBM) is implemented in the current work. The popular Single Relaxation Time Lattice Boltzmann method with D2Q9 square lattice model and second-order accurate boundary condition is adopted for the current study. Results: The numerical approach of LBM is used to simulate fluid flows in a 2D bounded domain with grooved bottom surfaces. The influence of different factors, such as the height of bottom-wall surface grooves, flow Reynolds number, and wavelength of these grooves on flow patterns, is then investigated. Conclusion: The numerical study of the bounded domain is considered, and the Reynolds number is varied from 100 to 3200, with two and four-wavelength grooves evaluated on the bottom surface, each having a height of 0.25 and 0.75. The impacts on the flow pattern both within and slightly above the grooves of the computational findings for different Reynolds numbers, groove heights, and groove wavelengths are evaluated. As the Reynolds number rises, the mixing phenomenon of fluid is shown to flow more quickly in the wall-driven enclosures. © 2023 Bentham Science Publishers.
  • No Thumbnail Available
    Item
    Simulation of fluid flow in a lid-driven cavity with different wave lengths corrugated walls using Lattice Boltzmann method
    (Taiwan Institute of Chemical Engineers, 2023) Fatima, N.; Rajan, I.; Arumuga Perumal, D.A.; Anbalagan, A.; Ahmed, S.A.A.; Gorji, M.R.; Ahmad, Z.
    Background: The Lid-driven cavity (LDC) flow is an interesting problem in fluid mechanics. The lattice Boltzmann Method (LBM) is used to simulate fluid flow in a LDC with different wave lengths corrugated walls. Methods: The D2Q9 model is used for the 2D bounded domain where the analysis of bottom-bounded wall corrugations on the flow features is analyzed. For validation, a square corrugation along the bottom wall with a driven top wall is considered. A lattice size independence study is performed and the LBM code is substantiated with published results for different values of Reynolds number. The code is then modified by using sinusoidal corrugated walls with different wavelengths along the bottom surface. Significant finding: The streamline patterns, vorticity contours and kinetic energy contours are studied for different Reynolds number. Results shown that the position, number and size of vortices depend on the number of corrugations and value of Reynolds number used. The secondary vortices tend to increase in size as the Reynolds number increase. The kinetic energy contours show maximum energy near the top wall which reduces inside the cavity. © 2023