Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
17 results
Search Results
Item Wave interaction with floating platform of different shapes and supports using BEM approach(Department of Naval Architecture and Marine Engineering mmkarim@name.buet.ac.bd, 2017) Shirkol, A.I.; Nasar, T.Wave interaction with a floating thin elastic plate which can be used as floating platform is analyzed using Boundary Element Method (BEM) for different shapes such as rectangular, circular and triangular. Different support conditions are considered and the performance of the floating platform under the action of ocean waves is explored. The study is performed under the assumption of linearized water wave theory and the floating elastic plate is modelled based on the Euler-Bernoulli beam theory. Using Galerkin’s approach, a numerical model has been developed and the hydrodynamic loading on the floating elastic plate of shallow draft (thickness) is investigated. The wave forces are generated by the numerical model for the analysis of the floating plate. The resulting bending moment and optimal deflection due to encountering wave force is analysed. The present study will be helpful in design and analysis of the large floating platform in ocean waves. © 2017 ANAME Publication. All rights reserved.Item Coupled BEM and FEM for the analysis of floating elastic plate with arbitrary shapes(Taylor and Francis Ltd. michael.wagreich@univie.ac.at, 2019) Shirkol, A.I.; Nasar, T.In order to analyse the hydroelastic behaviour of the floating thin elastic plate, a numerical model has been developed by coupling higher-order boundary element method (BEM) and finite element method (FEM). The present model is capable of investigating the very large floating structure of arbitrary shapes at finite and infinite water depths. The developed hybrid model contains the same nodes maintaining the same order and basis function in both the methods. The novelty of this work can be seen in the newly developed modified Green’s function. Two geometrical configurations (triangle and trapezoidal) have been analysed. The time required for convergence and deflection of the geometrical model have been captured. Furthermore, the results obtained by Wang and Meylan [2004. A higher-order-coupled boundary element and finite element method for the wave forcing of a floating elastic plate. J Fluids Struct. 19(4):557–572] are used to validate the developed numerical model. It is concluded that the model works better in finite water depth for trapezoidal shape. © 2019, © 2019 Informa UK Limited, trading as Taylor & Francis Group.Item Scattering of Gravity Waves by Multiple Submerged Rubble-Mound Breakwaters(Springer Science and Business Media Deutschland GmbH info@springer-sbm.com, 2020) Vijay, K.G.; Venkateswarlu, V.; Karmakar, D.A numerical model based on multi-domain is developed to investigate the scattering of surface gravity waves by an array of submerged rubble-mound breakwaters. The boundary value problem is analysed in two dimensions under the assumption of small-amplitude wave theory in the water of finite depth. Analytical solution based on the eigenfunction expansion method is independently developed to validate the numerical model in addition to available results in the literature. Various configurations such as trapezoidal, triangular, and circular shapes are investigated parametrically. The performance characteristics are discussed by analysing the scattering coefficients (such as reflection, transmission, and damping coefficient) for different physical parameters like relative water depth, relative structural dimensions, relative spacing, and the number of submerged breakwaters. In the case of trapezoidal breakwaters, the crest width plays a major role in dampening the wave energy by a whopping 90%. Moreover, the wave damping performance of triangular breakwaters is very poor. The Bragg resonant reflection is observed to be a trivariate function, which depends on structural porosity, structural thickness, and the number of submerged breakwaters. The free spacing is evident in adjusting the position of Bragg resonant reflection by multiple equi-spaced structures of several shapes. The present study will be useful in the effective design of Bragg breakwaters for establishing a calm wave environment near the harbour regions. © 2020, King Fahd University of Petroleum & Minerals.Item Performance evaluation of submerged breakwater using Multi-Domain Boundary Element Method(Elsevier Ltd, 2021) Patil, S.B.; Karmakar, D.The gravity wave interaction with submerged breakwater of different structural configurations are investigated based on the small-amplitude wave theory. The boundary value problem is analysed in two-dimension using the linearized wave theory in water of finite depth. The submerged breakwater structural configuration such as (i) thin-walled type (impermeable), (ii) rectangular type (impermeable and permeable), (iii) triangular type (impermeable, permeable, perforated), (iv) trapezoidal type (impermeable, permeable, perforated) and (v) Tandem type (impermeable, permeable, perforated) are considered to analyse and performance of the breakwater. The numerical model is developed using the Multi-Domain Boundary Element Method (MDBEM) to analyse the hydrodynamic scattering coefficient (such as reflection, transmission and dissipation coefficient) for the change of physical parameters such as relative spacing between the breakwaters, relative water depth and structural dimensions. The convergence of the present numerical model is performed for the specific case of tandem breakwater and numerical computation is validated with the results available in the literature. The wave reflection and transmission coefficient along with wave force on the structure is analysed for different shapes, structural parameters and geometrical parameters of the breakwater to maximize the efficiency of breakwater. In the case of permeable breakwater, the submerged tandem breakwater is found to be more efficient in wave transformation as compared to rectangular, triangular and trapezoidal permeable submerged breakwaters. The comparative analysis performed on different configurations of the breakwater in the present study will be helpful in the effective design of the breakwater near the harbour regions. © 2021 Elsevier LtdItem Wave trapping efficiency of a flexible membrane near a partially reflecting seawall(American Society of Mechanical Engineers (ASME), 2021) Venkateswarlu, V.; Vijay, K.G.; Pandi, R.R.; Nishad, C.S.The gravity wave interaction with a flexible membrane placed at a finite distance from the partially reflecting seawall is analyzed under the framework of linear water wave theory using the multi-domain boundary element method (BEM). The flow through a flexible membrane is assumed to follow Darcy's law in addition to membrane displacements. As a viable alternative to the existing wave dampers, the flexible membrane is examined for the effective dampening of incident waves. The correctness of the numerical results is affirmed with the known results available in the literature. The effect of membrane tension, submergence depth, membrane width, porosity, angle of inclination, and confined chamber spacing on hydrodynamic coefficients is discussed as a function of dimensionless wavenumber. The partially reflecting harbor wall diminishes the wave reflection coefficient in the long-wave regime. The increase in the flexible membrane width does not necessarily ensure the ideal wave capturing performance. A shift in the peak of the maximum deflection is observed with the increase of membrane width while there is a shift in peak outward for the increase in the submergence depth. Moreover, the maximum deflection is found to decrease with the increase in porosity, and it is 62% reduction for membrane porosity b = 1 due to the significant wave damping. The wave run-up and the wall force coefficients are found to be minimum when the relative plate width is B/h = 1. The present study is expected to be useful for the design of cost-effective wave attenuating systems. © © 2021 by ASME.Item Hydrodynamic analysis of floating tunnel with submerged rubble mound breakwater(Elsevier Ltd, 2022) Patil, S.B.; Karmakar, D.The wave interaction with a Submerged Floating Tunnel (SFT) of two different shapes (rectangular and circular) in the presence of a submerged rubble mound breakwater (SRMB) is analyzed using Multi-Domain Boundary Element Method (MDBEM). Furthermore, three typical SFT cross-sections (rectangular, trapezoidal, and circular) of equal area and structural height in the presence of SRMB under similar operating conditions are investigated as comparative study to analyse the influence of SFT shape on hydrodynamic performance. The performance of the tunnel configurations is analyzed as a (a) measurement in terms of hydrodynamic efficiency and (b) criterion for tunnel structure safety. In both shallow and intermediate water depth regions, the critical wave number and the critical angle of incidence followed by resonant wave reflection are identified, and suitable structural parameters of SRMB such as structural porosity in the armour layer, relative crest width, relative gap width between the SFT and the SRMB, structural width and position (relative draft of tunnel structure measured from the free water surface) of SFT are investigated. The present parametric investigation of SFT with SRMB reveals an improved wave transformation properties for a specific range of water depth. The coupling of SRMB has resulted not only in a reduction of wave-induced force acting on SFTs, but also in improved performance in wave transformation characteristics as a coastal protection structure, which is substantially determined by SRMB structural properties. Due to the presence of SRMB, the SFT's safety is improved, which may also add stability to the SFT. A comparative study of different distinct cross-sections of SFTs indicates that, due to its shape, the circular SFT has a reduced reflection capability and lower wave-induced force with nearly the same wave transmission as the rectangular and trapezoidal SFT. The study performed on the coupled SFT and rubble mound breakwater may be useful in determining the suitability of breakwaters not only for maintaining shore dynamics but also for protecting important floating structures for underwater transit. © 2022 Elsevier LtdItem Hydrodynamic performance of submerged breakwater in tandem with thin-walled as submerged reef structure(SAGE Publications Ltd, 2023) Patil, S.B.; Karmakar, D.The interaction of gravity waves with submerged tandem breakwater of different structural configurations is analysed in finite water depth using the Multi-Domain Boundary Element Method (MDBEM). The wave transformation characteristics, wave forces and wave energy dissipation are analysed considering the presence of impermeable type thin-walled as reef structure in front of the primary submerged breakwater. The comparative study is performed for the submerged structures of various shapes (trapezoidal, triangular, rectangular and thin-walled) and types (rubble mound, permeable, impermeable) that are designed to function together as a tandem breakwater. The effect of varying angle of incidence, relative submergence depth, and relative gap between the reef structure and primary breakwater on wave reflection and transmission are derived for the suggested tandem breakwater models. Among all the impermeable-type models, the thin-walled as reef structure designed at a distance in front of thin-walled as a primary submerged breakwater as a tandem is observed to perform efficiently in terms of energy dissipation and also offers an optimum wave transmission for both short and long wave conditions. Further, the permeable and rubble mound type trapezoidal tandem breakwater offers higher energy dissipation in comparison with all other breakwaters. In view of the design considerations and structural stability of submerged breakwaters, the addition of a reef structure acts as a defence system for the primary breakwater and also creates an energy dissipation zone that allows the shore dynamics to be preserved, making tandem models more effective in the harbour region. © IMechE 2022.Item Hydrodynamic Performance of Fixed Floating Structures Coupled with Submerged Breakwaters Using the Multidomain Boundary Element Method(American Society of Civil Engineers (ASCE), 2023) Patil, S.B.; Karmakar, D.The hydrodynamic characteristics of fixed floating structure (FFSs) of various configurations, such as rectangular fixed floating structures and trapezoidal fixed floating structures coupled with submerged breakwaters of two different shapes, namely, rectangular breakwater and trapezoidal breakwater, are investigated using the multidomain boundary element method under the framework of small-amplitude wave theory. The hydrodynamic analysis of the FFS with and without the presence of submerged breakwater is performed for the variation in physical parameters such as a change in structural parameters of the submerged breakwater (shape, relative submergence depth, relative crest width, and structural porosity), structural parameters of FFS (shape and structural width), wave parameter (angle of incidence), and relative spacing between the FFS and submerged breakwater. The study demonstrates, for a given range of incident wave angles, periodic values of the distance between the submerged breakwater and the FFS and optimal shape combinations for which the coupled structures act effectively in attenuating wave force acting on the FFS and optimizing wave transformations. In addition, to enhance the hydrodynamic performance, the presence of reef structures in front of the FFS is associated, which results in Bragg's resonance with a phase shift in peaks of wave reflection and transmission coefficient caused by changing the structural porosity of the submerged breakwater, indicating that the proposed models are more flexible, allowing demand-based control over shore dynamics and coastal management. The study will be useful for coastal management and safeguarding floating structures by selecting various forms and combinations of coupled FFSs with submerged porous breakwaters. © 2023 American Society of Civil Engineers.Item Hydrodynamic performance of wave energy converter integrated with pile restrained floating structure near a partially reflecting seawall(Elsevier Ltd, 2023) Patil, S.B.; Karmakar, D.The integration of a Wave Energy Converter (WEC) with a Pile-Restrained Rectangular Floating Breakwater (PRFB) in the presence of a partially reflecting vertical seawall is analysed to enhance the hydrodynamic performance and WEC efficiency of the integrated breakwater-WEC device based on small amplitude wave theory using the Boundary Element Method (BEM). The rectangular floating breakwater is designed to have heave motion with a pile-restrained floating structure placed in a position to attenuate the incoming wave in the transmitted region and the linear power take-off (PTO) damping is employed to calculate the absorbed power. The study is performed to understand the effectiveness of wave energy conversion and its hydrodynamic performance due to changes in the seawall's porosity, relative structural width, relative structural draft, wave energy conversion power take-off damping coefficients, and the relative gap of the WEC integrated with PRFB from the seawall. The study demonstrated that in the presence of a fully reflecting seawall, the wave energy extraction is enhanced for the integrated WEC system without compromising the defined threshold wave reflection coefficient but at the expense of a constrained range of wavenumbers that correspond near the system's fundamental natural frequency. Moreover, the capture width ratio is noted to be higher for relatively smaller structural drafts, while the wave reflection coefficient shows precisely the reverse trend. However, under such circumstances, the integrated WEC system operates as a motion-trapping structure, especially when the reflection coefficient of the seawall, CR≥0.75. Thus, the present study will assist the designer in determining the appropriate degrees of efficiency of the WEC device without sacrificing hydrodynamic performance by fine-tuning the hybrid floating breakwater system's geometrical parameters. © 2023 Elsevier LtdItem Hydrodynamic performance of pile restrained U-shaped OWC device using boundary element method(Elsevier Ltd, 2024) Muduli, R.; Patil, S.B.; Karmakar, D.The hydrodynamic performance of a pile-restrained U-shaped Oscillating Water Column (U-OWC) device under the action of normal incident waves is analysed using the Boundary Element Method (BEM). The hydrodynamic parameters, such as the radiation susceptance and conductance coefficients and hydrodynamic efficiency, are analysed for various cases of different structural parameters of U-OWC. It is observed that the theoretical maximum efficiency can be achieved for a wide range of wavenumbers by appropriate tweaking and optimisation of the device geometry. The resonance enables the device to reach the maximum possible efficiency and the phenomenon of obtaining the maximum efficiency of the final optimised geometry is achieved. The shorter length of draft of the device is chosen over longer draft considering the high construction cost as well as efficiency enhancement of the device, even though the longer draft is observed to perform marginally better in a narrow wave number range. The numerical investigation of the theoretical maximum efficiency is observed to be 100% whenever the μ (dimensionless radiation susceptance coefficient) crosses the zero mark. Consequently, the maximum theoretical efficiency is observed close to maximum whenever μ is close to zero. The final optimised geometry consisting of an inward inclined top wall configuration performs best but could be challenging in actual construction. Further, on inclining the bottom wall in the inwards or outward direction does not result in better performance than inclining only the top wall. The present study explores a novel concept of pile-restrained U-OWC kept near the surface and will be helpful in determining the best-performing geometry for the device. © 2023 Elsevier Ltd