Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Subject: search.filters.subject.Backpropagation algorithms

Search Results

Now showing 1 - 5 of 5
  • No Thumbnail Available
    Item
    Nonlinear system identification using memetic differential evolution trained neural networks
    (2011) Subudhi, B.; Jena, D.
    Several gradient-based approaches such as back propagation (BP) and Levenberg Marquardt (LM) methods have been developed for training the neural network (NN) based systems. But, for multimodal cost functions these procedures may lead to local minima, therefore, the evolutionary algorithms (EAs) based procedures are considered as promising alternatives. In this paper we focus on a memetic algorithm based approach for training the multilayer perceptron NN applied to nonlinear system identification. The proposed memetic algorithm is an alternative to gradient search methods, such as back-propagation and back-propagation with momentum which has inherent limitations of many local optima. Here we have proposed the identification of a nonlinear system using memetic differential evolution (DE) algorithm and compared the results with other six algorithms such as Back-propagation (BP), Genetic Algorithm (GA), Particle Swarm Optimization (PSO), Differential Evolution (DE), Genetic Algorithm Back-propagation (GABP), Particle Swarm Optimization combined with Back-propagation (PSOBP). In the proposed system identification scheme, we have exploited DE to be hybridized with the back propagation algorithm, i.e. differential evolution back-propagation (DEBP) where the local search BP algorithm is used as an operator to DE. These algorithms have been tested on a standard benchmark problem for nonlinear system identification to prove their efficacy. First examples shows the comparison of different algorithms which proves that the proposed DEBP is having better identification capability in comparison to other. In example 2 good behavior of the identification method is tested on an one degree of freedom (1DOF) experimental aerodynamic test rig, a twin rotor multi-input-multi-output system (TRMS), finally it is applied to Box and Jenkins Gas furnace benchmark identification problem and its efficacy has been tested through correlation analysis. © 2011 Elsevier B.V.
  • No Thumbnail Available
    Item
    An intelligent system for squeeze casting process—soft computing based approach
    (Springer London, 2016) Gowdru Chandrashekarappa, G.C.; Krishna, P.; Parappagoudar, M.B.
    The present work deals with the forward and reverse modelling of squeeze casting process by utilizing the neural network-based approaches. The important quality characteristics in squeeze casting, namely surface roughness and tensile strength, are significantly influenced by its process variables like pressure duration, squeeze pressure, and pouring and die temperatures. The process variables are considered as input and output to neural network in forward and reverse mapping, respectively. Forward and reverse mappings are carried out utilizing back propagation neural network and genetic algorithm neural network. For both supervised learning networks, batch training is employed using huge training data (input-output data). The input-output data required for training is generated artificially at random by varying process variables between their respective levels. Further, the developed model prediction performances are compared for 15 random test cases. Results have shown that both models are capable to make better predictions, and the models can be used by any novice user without knowing much about the mechanics of materials and the process. However, the genetic algorithm tuned neural network (GA-NN) model prediction performance is found marginally better in forward mapping, whereas BPNN produced better results in reverse mapping. © 2016, Springer-Verlag London.
  • No Thumbnail Available
    Item
    Back propagation genetic and recurrent neural network applications in modelling and analysis of squeeze casting process
    (Elsevier Ltd, 2017) Gowdru Chandrashekarappa, M.; Shettigar, A.K.; Krishna, P.; Parappagoudar, M.B.
    Today, in competitive manufacturing environment reducing casting defects with improved mechanical properties is of industrial relevance. This led the present work to deal with developing the input-output relationship in squeeze casting process utilizing the neural network based forward and reverse mapping. Forward mapping is aimed to predict the casting quality (such as density, hardness and secondary dendrite arm spacing) for the known combination of casting variables (that is, squeeze pressure, pressure duration, die and pouring temperature). Conversely, attempt is also made to determine the appropriate set of casting variables for the required casting quality (that is, reverse mapping). Forward and reverse mapping tasks are carried out utilizing back propagation, recurrent and genetic algorithm tuned neural networks. Parameter study has been conducted to adjust and optimize the neural network parameters utilizing the batch mode of training. Since, batch mode of training requires huge data, the training data is generated artificially using response equations. Furthermore, neural network prediction performances are compared among themselves (reverse mapping) and with those of statistical regression models (forward mapping) with the help of test cases. The results shown all developed neural network models in both forward and reverse mappings are capable of making effective predictions. The results obtained will help the foundry personnel to automate and précised control of squeeze casting process. © 2017
  • No Thumbnail Available
    Item
    A combined ANN-GA and experimental based technique for the estimation of the unknown heat flux for a conjugate heat transfer problem
    (Springer Verlag service@springer.de, 2018) Kumar, M.K.; Vishweshwara, P.S.; Gnanasekaran, N.; Balaji, C.
    The major objectives in the design of thermal systems are obtaining the information about thermophysical, transport and boundary properties. The main purpose of this paper is to estimate the unknown heat flux at the surface of a solid body. A constant area mild steel fin is considered and the base is subjected to constant heat flux. During heating, natural convection heat transfer occurs from the fin to ambient. The direct solution, which is the forward problem, is developed as a conjugate heat transfer problem from the fin and the steady state temperature distribution is recorded for any assumed heat flux. In order to model the natural convection heat transfer from the fin, an extended domain is created near the fin geometry and air is specified as a fluid medium and Navier Stokes equation is solved by incorporating the Boussinesq approximation. The computational time involved in executing the forward model is then reduced by developing a neural network (NN) between heat flux values and temperatures based on back propagation algorithm. The conjugate heat transfer NN model is now coupled with Genetic algorithm (GA) for the solution of the inverse problem. Initially, GA is applied to the pure surrogate data, the results are then used as input to the Levenberg- Marquardt method and such hybridization is proven to result in accurate estimation of the unknown heat flux. The hybrid method is then applied for the experimental temperature to estimate the unknown heat flux. A satisfactory agreement between the estimated and actual heat flux is achieved by incorporating the hybrid method. © 2018, Springer-Verlag GmbH Germany, part of Springer Nature.
  • No Thumbnail Available
    Item
    Dew Point temperature estimation: Application of artificial intelligence model integrated with nature-inspired optimization algorithms
    (MDPI AG indexing@mdpi.com Postfach Basel CH-4005, 2019) Naganna, S.R.; Deka, P.C.; Ghorbani, M.A.; Biazar, S.M.; Al-Ansari, N.; Yaseen, Z.M.
    Dew point temperature (DPT) is known to fluctuate in space and time regardless of the climatic zone considered. The accurate estimation of the DPT is highly significant for various applications of hydro and agro-climatological researches. The current research investigated the hybridization of a multilayer perceptron (MLP) neural network with nature-inspired optimization algorithms (i.e., gravitational search (GSA) and firefly (FFA)) to model the DPT of two climatically contrasted (humid and semi-arid) regions in India. Daily time scale measured weather information, such as wet bulb temperature (WBT), vapor pressure (VP), relative humidity (RH), and dew point temperature, was used to build the proposed predictive models. The efficiencies of the proposed hybrid MLP networks (MLP-FFA and MLP-GSA) were authenticated against standard MLP tuned by a Levenberg-Marquardt back-propagation algorithm, extreme learning machine (ELM), and support vector machine (SVM) models. Statistical evaluation metrics such as Nash Sutcliffe efficiency (NSE), root mean square error (RMSE), and mean absolute error (MAE) were used to validate the model efficiency. The proposed hybrid MLP models exhibited excellent estimation accuracy. The hybridization of MLP with nature-inspired optimization algorithms boosted the estimation accuracy that is clearly owing to the tuning robustness. In general, the applied methodology showed very convincing results for both inspected climate zones. © 2019 by the authors.