Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
3 results
Search Results
Item Generalized optimization procedure for rotational magnetized direction permanent magnet thrust bearing configuration(SAGE Publications Ltd info@sagepub.co.uk, 2019) Bekinal, S.I.; Doddamani, M.; Vanarotti, M.; Jana, S.Optimization of rotational magnetized direction permanent magnet thrust bearing configuration is carried out using generalized three-dimensional mathematical model. The bearing features namely axial force and stiffness are maximized using in-house developed mathematical expressions solved using MATLAB. The design variables selected for the optimization are axial offset, number of ring pairs, air gap and inner radius of inner and outer rings. The maximized axial force values of the optimized configuration are validated with the finite element analysis results. To overcome the high computational cost associated with three-dimensional equations, generalized method of optimization is sucessfully demonstrated using plots representing variation of optimal design variables as a function of air gap with respect to bearing’s outer diameter. Simple and useful method of using the generalized plots for the process of optimization is presented by dimension optimization of representative bearing configuration with a particular aspect ratio. The proposed optimization using mathematical model and generalized approach assists designer in selecting optimized geometrical parameters of rotational magnetized direction thrust bearing configurations easily for variety of high-speed applications. © IMechE 2018.Item Analysis of novel eddy current damper for multi-ring permanent magnet thrust bearing(Electromagnetics Academy, 2021) Deshwal, D.; Bekinal, S.I.; Doddamani, M.—This paper deals with analyzing a novel eddy current damper for an axially magnetized multi-ring permanent magnet thrust bearing (MPMTB). Initially, the bearing is optimized for maximum axial force by selecting three general parameters (air gap, outer diameter of stator, and length) using a generalized optimization procedure. Then, the axial force of an optimized bearing is validated with the mathematical model results. Finally, the novel and conventional eddy current dampers (ECDs) for an optimized MPMTB are analyzed for damping forces and coefficients using three-dimensional (3D) finite element transient analysis in ANSYS. Based on the analysis results, the proposed novel structure could be selected to replace the conventional one for providing damping to MPMTB effectively without affecting the radial air gap between the rotor and stator rings. © 2021, Electromagnetics Academy. All rights reserved.Item Experimental investigation and parametric optimization of FSW of mineral-reinforced AA6061 matrix composite(Institute of Physics, 2024) Prabhu B, S.R.; Herbert, M.A.In this work, rutile reinforced AA 6061 matrix composites were joined using friction stir welding and the process variables were optimized using Taguchi L27 orthogonal design of experiments. The rotational speed, axial force and tool tilt angle were the parameters taken into consideration. The optimum process variables were determined with reference to tensile strength, impact strength and hardness of the joint. The predicted optimal value of output responses was confirmed by conducting the confirmation run using optimum parameters. The optimal process variables combination values that resulted in improved mechanical properties were observed at a tool rotational speed of 1400 rpm, a tool tilt angle of 2 degree, and an axial force of 3KN. Scanning electron microscopy (SEM) analysis were used to probe the microstructures. © 2024 The Author(s). Published by IOP Publishing Ltd.