Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
14 results
Search Results
Item Mechanical and acoustic properties of areca fiber reinforced phenol formaldehyde composites(2010) Mohan Kumar, G.C.M.In this paper, mechanical and acoustic properties of natural areca fiber reinforced phenol formaldehyde composite are studied. Areca fiber composites were prepared using phenol formaldehyde with randomly distributed fibers. Strength of the composite is determined and other tests like adhesion tensile test, moisture absorption test, and biodegradable were also carried out. Acoustic tests are carried out to measure the sound transmission loss (STL) of the cured composite and compared with wood based particle board. The results show that the fully developed material has higher STL for frequencies up to 3 kHz compared to wood-based particle boards.Item Sound radiation and transmission loss characteristics of a honeycomb sandwich panel with composite facings: Effect of inherent material damping(Academic Press, 2016) Arunkumar, M.P.; Jagadeesh, M.; Jeyaraj, J.; Gangadharan, K.V.; Mailan Chinnapandi, M.C.L.This paper presents the results of numerical studies carried out on vibro-acoustic and sound transmission loss behaviour of aluminium honeycomb core sandwich panel with fibre reinforced plastic (FRP) facings. Layered structural shell element with equivalent orthotropic elastic properties of core and orthotropic properties of FRP facing layer is used to predict the free and forced vibration characteristics. Followed by this, acoustic response and transmission loss characteristics are obtained using Rayleigh integral. Vibration and acoustic characteristics of FRP sandwich panels are compared with aluminium sandwich panels. The result reveals that FRP panel has better vibro-acoustic and transmission loss characteristics due to high stiffness and inherent material damping associated with them. Resonant amplitudes of the response are fully controlled by modal damping factors calculated based on modal strain energy. It is also demonstrated that FRP panel can be used to replace the aluminium panel without losing acoustic comfort with nearly 40 percent weight reduction. © 2016 Elsevier LtdItem Sound transmission loss characteristics of sandwich aircraft panels: Influence of nature of core(SAGE Publications Ltd info@sagepub.co.uk, 2017) Arunkumar, M.P.; Jeyaraj, J.; Gangadharan, K.V.; Mailan Chinnapandi, M.C.Sandwich panel which has a design involving acoustic comfort is always denser and larger in size than the design involving mechanical strength. The respective short come can be solved by exploring the impact of core geometry on sound transmission characteristics of sandwich panels. In this aspect, the present work focuses on the study of influence of core geometry on sound transmission characteristics of sandwich panels which are commonly used as aircraft structures. Numerical investigation has been carried out based on a 2D model with equivalent elastic properties. The present study has found that, for a honeycomb core sandwich panel in due consideration to space constraint, better sound transmission characteristics can be achieved with lower core height. It is observed that, for a honeycomb core sandwich panel, one can select cell size as the parameter to reduce the weight with out affecting the sound transmission loss. Triangular core sandwich panel can be used for low frequency application due to its increased transmission loss. In foam core sandwich panel, it is noticed that the effect of face sheet material on sound transmission loss is significant and this can be controlled by varying the density of foam. © 2016, © The Author(s) 2016.Item Vibro-acoustic response and sound transmission loss characteristics of truss core sandwich panel filled with foam(Elsevier Masson SAS 62 rue Camille Desmoulins Issy les Moulineaux Cedex 92442, 2018) Arunkumar, M.P.; Jeyaraj, P.; Gangadharan, K.V.; Mailan Chinnapandi, M.C.This paper presents the studies carried out for improving the acoustic behavior of truss core sandwich panel, which is mostly used in aerospace structural applications. The empty space of the truss core is filled with polyurethane foam (PUF) to achieve better vibro-acoustic and sound transmission loss characteristics. Initially equivalent elastic properties of the foam filled truss core sandwich panel are calculated. Then, the vibration response of the panel under a harmonic excitation is obtained based on the equivalent 2D finite element model. Finally, the vibration response is given as an input to the Rayleigh integral code built in-house to obtain the acoustic and sound transmission loss characteristics. The results revealed that PUF filling of the empty space of the truss core, significantly reduces resonant amplitudes of both vibration and acoustic responses. It is also observed that foam filling reduces the overall sound power level significantly. Similarly, sound transmission loss studies revealed that, sudden dips at resonance frequencies are significantly reduced. Also an experiment is conducted on forced vibration response of honeycomb core sandwich panel to show that equivalent 2D model can be used for predicting sound power level and transmission loss behavior. © 2018 Elsevier Masson SASItem Vibro-acoustics response of an isotropic plate under non-uniform edge loading: An analytical investigation(Elsevier Masson SAS 62 rue Camille Desmoulins Issy les Moulineaux Cedex 92442, 2020) Gunasekaran, V.; Jeyaraj, J.; Mailan Chinnapandi, L.B.M.Analytical studies carried out on the vibro-acoustic response behavior of an isotropic plate under non-uniform edge loads subjected to steady-state mechanical excitation is presented. An analytical method based on the energy approach is used to calculate the buckling load (Pcr). Free and forced vibration responses of the plate are obtained using an analytical method based on Reddy's third-order shear deformation theorem (TSDT) while sound radiation behavior is analyzed using Rayleigh Integral. Results revealed that Pcr is significantly influenced by the nature of non-uniform edge load. Similarly, natural frequencies reduce with an increase in axial compressive load due to a reduction in structural stiffness. Vibration and acoustic resonant amplitudes are affected by the intensity of the compressive load. Sound transmission loss reduces with an increase in compressive load magnitude and the effect is significant in the stiffness dominant region. © 2020 Elsevier Masson SASItem Acoustic response behavior of porous 3D graphene foam plate(Elsevier Ltd, 2020) Kumar, A.; Gunasekaran, V.; Mailan Chinnapandi, L.B.M.; Jeyaraj, J.Sound radiation and sound transmission loss (STL) behavior of porous 3D graphene (3D-GrF) foam plate are presented. Two variable refined plate theory which includes both transverse bending and shear stresses is used to model the plate and Navier's solution is used to calculate the vibration responses while Rayleigh integral is used to analyze the acoustic response. Variation in free vibration frequencies with the nature of porosity distribution is significant for the 3D-GrF plates having higher porosity co-efficient. The natural frequency of the 3D-GrF plate with more porosity around the center and less porosity at the outer surfaces is high. However, resonant amplitudes of the responses and STL of the plates are controlled by both the nature of the porosity distribution pattern and porosity co-efficient. In general, STL of the plate with less porosity around the center and high porosity at the extreme surfaces is high compared to the other cases. © 2020 Elsevier LtdItem Acoustic behaviour of 3D printed bio-degradable micro-perforated panels with varying perforation cross-sections(Elsevier Ltd, 2021) Sailesh, R.; Yuvaraj, L.; Jeyaraj, J.; Doddamani, M.; Mailan Chinnapandi, L.B.Influence of perforations having arbitrarily varying cross-sections on the acoustic behaviour of 3D printed bio-degradable panels made of Poly Lactic Acid (PLA) is presented. Circular perforations having six different types of cross-sectional variations namely convergent-divergent (CD), divergent-convergent (DC), convergent (C), divergent (D) with two different perforation diameters are realized using Fused Filament Fabrication (FFF) based 3D printing. Sound absorption and transmission loss characteristics of these perforated panels are estimated through impedance tube technique. Results revealed that sound absorption of perforated panels with varying cross-section is better than uniform cross-sectional perforation for the given frequency range. Among, the different cross-sectional variations explored, comparable and lower transmission losses are exhibited by DC and D perforation pattern with respect to constant diameter 1 mm panel. The sound transmission results of all other five specimens were significantly higher than constant diameter 8 mm panel and observed to be increasing with frequency. Geometrical perforation variations are noted to be a very crucial factor in designing soundproof panels as presented in this work. The experimental results are compared with the numerical results and found to be in good agreement. Such numerical analysis paves the guidelines for designing optimum perforation geometries prior to the on-field testing of the functional prototypes. © 2020 Elsevier LtdItem Acoustic radiation and transmission loss of FG-Graphene composite plate under nonuniform edge loading(Elsevier Ltd, 2021) Gunasekaran, V.; Jeyaraj, J.; Mailan Chinnapandi, L.B.The influence of nonuniform edge loads on the acoustic response of a functionally graded graphene reinforced composite plate is investigated analytically. The energy method is implemented to calculate the buckling load (Pcr). An analytical method based on Reddy's third-order shear deformation theorem is used to obtain the vibration response, and acoustic response is obtained using Rayleigh Integral. The nature of edge load variation on buckling and vibro-acoustic response is significant. Free vibration mode shape changes with an increase in edge load and consequently affects the resonant amplitude of responses also especially for the plates with a higher aspect ratio. Volume fraction and dispersion pattern of graphene nano-platelets also influences the resonance amplitudes. Plate with FG?GRCC dispersion pattern has improved buckling and vibro-acoustic response behavior. Similarly, change in sound transmission loss level is significant in the stiffness region compared to the damping and mass dominated region. © 2021 Elsevier Masson SASItem Sound absorption and transmission loss characteristics of 3D printed bio-degradable material with graded spherical perforations(Elsevier Ltd, 2022) Sailesh, R.; Yuvaraj, L.; Doddamani, M.; Mailan Chinnapandi, L.B.M.; Jeyaraj, J.The influence of spherical bubble perforations and their grading on acoustic characteristics of a 3D printed bio-degradable material is investigated. Samples with spherical bubble perforations of different sizes are distributed either uniformly or graded across the specimen thickness. A sample having typical cylindrical perforations is also analyzed for comparative analysis. Sound absorption (SA) and sound transmission loss (STL) characteristics are estimated by the impedance tube method. The results reveal that the SA of all functionally graded (FG) perforations is higher at low frequencies. The SA and bandwidth are higher for a specimen with uniform, lower diameter bubbles at higher frequencies. The STL of FG perforations is highest among the specimens, and the difference increases significantly with frequency. The numerical and experimental results match a high degree of accuracy. FG perforations exhibited superior performance for both SA and STL. The proposed graded spherical porosity can be effectively utilized in soundproofing applications across building and transportation sectors. © 2021 Elsevier LtdItem Structural-Acoustic Response Analysis of Variable Stiffness Laminates with Inherent Material Damping(World Scientific, 2022) Gunasekaran, V.; Gulhane, S.; Gupta, S.; Jeyaraj, J.; Vasudevan, V.; Manickam, G.Sound radiation and transmission loss characteristics of variable stiffness composite plate reinforced with the curvilinear fibers are investigated numerically. The formulation is developed using higher-order shear flexible finite element model combined with Helmholtz wave equation. The governing equations obtained using Hamilton's approach are further solved through the modal super position method to analyze the vibration response under steady state excitation. The inherent material damping of the laminate is accounted through the modal damping calculated using the modal strain energy approach. The acoustic pressure of the variable stiffness laminates is estimated using the Raleigh integral. Subsequently, acoustic response characteristics such as acoustic power level, radiation efficiency, directivity pattern, and transmission loss from the laminates are predicted using the estimated sound pressure for various forcing frequencies. A parametric study covering a wide range of design variables including center and edge fiber angles, lamination scheme, thickness ratio, and boundary conditions on the acoustic sound behavior arising from the vibration of curvilinear fiber composite plate is detailed. This study reveals that the acoustic response of the curvilinear fiber composite plate is significantly influenced by the curvilinear fiber angles at the center/edge fiber angle of the layers. It is hoped that the results obtained here will be useful for designers in developing structures with desired acoustic response characteristics. © 2022 World Scientific Publishing Company.