Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Subject: search.filters.subject.Antibiofouling

Search Results

Now showing 1 - 3 of 3
  • No Thumbnail Available
    Item
    Antibiofouling hollow-fiber membranes for dye rejection by embedding chitosan and silver-loaded chitosan nanoparticles
    (Springer Verlag, 2019) Kolangare, I.M.; Isloor, A.M.; Zulhairun, Z.A.; Kulal, A.; A.F., A.F.; Siddique, I.; Asiri, A.M.
    The removal of toxic dyes from the wastewater and industrial effluents is a major environmental challenge. Various techniques have been employed for the removal of dyes, including the application of nano-sized adsorbents, nanocomposite membranes and photodegradation. Membrane filtration is an alterntive but suffers from drawbacks such as fouling. Here we present a simple approach for the development of antibiofouling membranes based on chitosan. The application of chitosan-based nanoparticles as additives for wastewater treatment is poorly explored. The chitosan and silver-loaded chitosan nanoparticles were synthesized by ionic gelation method and incorporated to fabricate hollow-fiber membranes by dry–wet spinning technique. The prepared membranes were characterized by morphological study, permeability test, antibiofouling study and dye rejection study. The nanocomposite hollow-fiber membranes displayed superior performance than their pristine form. The incorporation of 0.30 weight percent of the chitosan and silver-loaded chitosan nanoparticles into the hollow-fiber membranes enhanced the antifouling property with flux recovery ratio of 81.21 and 86.13%, respectively. The dye rejection results showed maximum rejection of 89.27 and 86.04% for Reactive Black 5 and Reactive Orange 16, respectively. Hence, it can be concluded that hollow-fiber membranes with silver-loaded chitosan nanoparticles are pertinent in developing antibiofouling membranes for the treatment of industrial dye effluents. © 2018, Springer Nature Switzerland AG.
  • No Thumbnail Available
    Item
    Anti-biofouling evaluation of vacuum-assisted hydrophobic ytterbium oxide (Yb2O3) coating on stainless steel by facile spray combustion
    (Springer, 2024) Karle, S.S.; Kailasam, K.; Vardhan, R.V.; Praveen, L.L.; Gautam, V.; Mandal, S.
    Despite the development of numerous coating techniques and materials, today’s anti-biofouling applications require coatings that are facile and mechanically robust in nature. Studies on the hydrophobicity of rare-earth oxides have risen due to their unusual chemical properties; ytterbium oxide is one such oxide substance. In this study, spray combustion was used to create a hydrophobic coating of ytterbium oxide (Yb2O3) on a stainless steel (SS) substrate, which was then vacuum-treated. GI-XRD analysis confirmed the sesquioxide cubic crystalline structure of Yb2O3. FESEM images displayed an underneath wavy morphological coating with discrete particles on the surface. The thickness and roughness were ~12 and ~0.17 µm, respectively. When 5 and 10 N loads were applied, the coating showed better scratch hardness than uncoated SS. Water contact angle (WCA) <10° indicated superhydrophilicity in the fabricated coating. After vacuum treatment, it became hydrophobic, and the WCA was 128°; because of the increment in the relative area fraction of the C–H bond. The proportion of area covered by blue–green algae (Phormidium sp.) on vacuum-treated Yb2O3 coating was only 3% compared to uncoated SS samples, 80%. © Indian Academy of Sciences 2024.
  • No Thumbnail Available
    Item
    Exploring the protection of spray-pyrolysed tungsten oxide hydrophobic coating on stainless steel in a marine environment
    (Springer, 2024) Gautam, V.; Praveen, L.L.; Vardhan, R.V.; Mandal, S.
    Tremendous potential in the field of anti-biofouling coatings to prevent stainless steel (SS)-based underwater pipelines, sea vessels and other marine structures have been recognized to protect from biofouling, which is often initiated by algae attachment over the surface. In this work, hydrophobicity in spray-pyrolysed tungsten oxide (TO) coating on SS-316 substrate has been reported for the first time, via post-processing treatment using octadecyltrimethoxysilane (ODTMS) to induce self-assembled monolayer (SAM). Initially, structural and vibrational characteristics of ODTMS and ODTMS-treated TO (OTO) coating on SS were analysed using X-ray diffraction (XRD), Fourier transform infrared (FTIR) and Raman spectroscopies. OTO-coating depicted a water contact angle (WCA) of 121°, revealing its hydrophobic nature, with further affirmation from X-ray photoelectron spectroscopy (XPS). Durability of the TO-coating was explored using the scratch hardness (Hs) test at different loading conditions (5, 10 and 15 N). Biofouling study was conducted by culturing blue-green algae (BGA, Phormidium sp.) in an in-house laboratory setup for 40 days, using seawater (collected from the Arabian Sea, Karnataka). The SS, TO- and OTO-coatings were immersed for 14 days in a controlled sea-water environment in the laboratory with the presence of BGA. A comparative study on the areal-algae attachment was keenly analysed over SS-, TO- and OTO-coatings. This work can be projected as a promising application providing multi-dimensional solutions in creating scratch-resistant and anti-biofouling coatings on SS in the shipbuilding industry. © Indian Academy of Sciences 2024.