Faculty Publications

Now showing 1 - 3 of 3

Bioleaching of zinc from e-waste by A. aquatilis in fluidised bed bioreactor
(Taylor and Francis Ltd., 2023) Minimol, M.; Shetty K, V.; Saidutta, M.B.
Technological advancements with the use of new-generation electronic devices and accumulated electronic wastes (e-wastes) raise environmental concerns. E-waste, especially mobile phone Printed Circuit Boards (PCBs) is a rich source of metals. Bioleaching, a microbe-mediated metal dissolution process is employed for the recovery of metals. The operational parameters like particle size, inoculum percentage (v/v) and e-waste load (w/v) were optimised for Zn bioleaching by Alcaligenes aquatilis in shake flasks and fluidised bed bioreactor (FBR). The e-waste feed particle size of 0.175 mm and 5% inoculum was found to be the optimum for Zn bioleaching in both the shake flask and FBR. The optimum e-waste load was 5% in the shake flask and 2% in FBR. The maximum recovery of Zn was 0.6 mg/g (13.73%) in the shake flask and 0.57 mg/g (13%) in FBR, implying that FBR exhibits similar efficiency of Zn bioleaching as in the shake flask. Further three sequential batch runs increased the recovery to a maximum of 1.66 mg/g from 4.37 mg/g Zn present in the PCBs ie., 38% Zn recovery. This shows that efficient bioleaching of Zn on a larger scale can be achieved with sequential batches and applied for the simultaneous recovery of metals from PCBs. © 2023 Indian Institute of Chemical Engineers.
Performance of Fluidized-Bed Bioreactor in Copper Bioleaching from Printed Circuit Boards using Alcaligenes aquatilis
(Springer Science and Business Media B.V., 2024) Madhavan, M.; Shetty K, V.; Saidutta, M.B.
Technological advancements have led to a demand for modern electronic gadgets and outdated ones discarded as electronic waste (e-waste). The printed circuit boards (PCBs) constitute a significant portion of these wastes that contain hazardous substances that mandate e-waste management. The rich source of precious and base metals makes it a resource for urban mining. Bioleaching, a process of biohydrometallurgy, an alternative to conventional heat and chemical-based metal recovery processes, can be efficiently applied for metal recovery from these wastes in an environmentally safe manner. The process parameters like particle size, inoculum size (v/v), and e-waste load (w/v) for bioleaching of Cu from PCBs in a Fluidized-Bed bioreactor (FBR) and shake flask using Alcaligenes aquatilis as bioleaching agent were optimized. The bioleaching of 47.99% and 37.54% of Cu from PCBs were achieved in shake flask and FBR, respectively. The optimal conditions of Cu bioleaching were 0.175 mm particle size, 5% (v/v) inoculum, and 2% (w/v) e-waste load with 169.45 mg/g and 132.55 mg/g of Cu recovery in shake flask and FBR at 84 and 96 h, respectively. Further, the Cu bioleaching was carried out in sequential batches to improve the recovery with the optimized conditions. There was a prominent increase in the cumulative %Cu bioleaching of about 80.02% after three sequential batch experiments from PCBs with an initial Cu concentration of 353.09 mg/g. The present study proves that sustainable heterotrophic bioleaching of Cu can be efficiently achieved in a Fluidized-bed bioreactor operated in sequential batch mode by Alcaligenes aquatilis. Graphical Abstract: (Figure presented.) © The Author(s), under exclusive licence to Springer Nature B.V. 2023. Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
Extracellular biosynthesis of CuO-TiO2 nanocomposites using Alcaligenes aquatilis for the photodegradation of reactive and azo dyes under visible light irradiation
(Springer, 2025) Agarwalla, S.; Shetty K, V.
In this study, CuO/TiO2 nanocomposites were biologically synthesized using cell-free supernatant (CFS) of Alcaligenes aquatilis growth culture by two-step synthesis method, one-pot method with sequential addition of precursors, and one-pot method with simultaneous addition of precursors. The one-pot method with simultaneous addition of precursors was found to be the best method for the synthesis in terms of degradation of reactive blue-220 (RB-220) and acid yellow-17 (AY-17) dyes under visible light irradiation. CuO/TiO2 nanocomposite was found to have the crystallite size of 14.7nm and the bandgap energy of 2.5 eV. The effect of synthesis parameters such as synthesis time, pH of CFS, and the ratio of Cu to Ti in the synthesis mixture on the photocatalytic degradation efficacy of these nanocomposite structures under visible light irradiation was studied. The optimum conditions for the synthesis of CuO/TiO2 nanocomposite particles by one-pot method with simultaneous addition of precursors were found to be pH 12 of CFS, synthesis duration of 24 h, and molar ratio of Cu to Ti in the synthesis mixture as 1:22 for RB-220 dye and 1:25 for AY-17 degradation. CuO/TiO2 nanocomposite particles synthesized under the optimum conditions and without any calcination could degrade RB-220 and AY-17 dyes completely in 120 min and 150 min, respectively. The kinetics of degradation of RB-220 and AY-17 by CuO@TiO2 nanocomposite particles followed first-order kinetic model with rate constant of 0.028 min?1 and 0.018 min?1, respectively. © The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature 2023.

Faculty Publications

Browse

Filters

Settings

Sort By

Results per page

Search Results