Faculty Publications

Now showing 1 - 3 of 3

Experimental and theoretical investigations on the cyclic operation of TSA cycle for air dehumidification using packed beds of silica gel particles
(Elsevier Ltd, 2013) Ramzy K, A.K.; Kadoli, R.; Ashok Babu, T.P.
Dehumidification using desiccant beds provide a good alternative for the conventional vapor compression cooling system. Desiccant material in the desiccant dehumidification system should undergo both adsorption and desorption processes. In the present work, experimental tests have been carried out for thermal swing adsorption (TSA) cycle utilizing two packed beds of silica gel spherical particles. The pseudo gas side controlled (PGC) mathematical model has been presented for predicting the cycle performance. The mathematical model has been validated using the experimental results. The root mean square of errors ranges from 1.15% to 9.03% for the exit air humidity ratio and from 1.08% to 9.68% for exit air temperature. The dynamics of desiccant bed during the cyclic operation has been investigated numerically. In addition, it has been found from the parametric study that the cycle efficiency is maximum for a regeneration temperature of 90-95°C when the bed length varies from 50 to 300mm and for desiccant particle diameter ranging from 2 to 5mm. A sensible cooling for the process air before undergoing the dehumidification period is recommended for increasing the cycle efficiency and the dehumidification time which is an added advantage. © 2013 Elsevier Ltd.
Significance of axial heat conduction in non-isothermal adsorption process in a desiccant packed bed
(2014) Ramzy, K.A.; Kadoli, R.; Ashok Babu, T.P.
Numerical simulation of heat and moisture interactions between air stream and the particles in a desiccant bed provide useful insight on the dynamics of the bed and performance characteristics. Current study introduces a mathematical model for the heat and moisture transfer in desiccant packed bed based on solid side resistance (SSR) model that will now consider heat conduction along the bed. Adsorption and desorption experimental tests have been carried out for validating both solid side resistance (SSR) and solid side resistance with axial heat conduction (SSR-AC) models. The models have been used to investigate the influence of various design parameters like air velocity, particle diameter, bed length and the number of units of mass transfer, on the significance of axial heat conduction. It has been found that increasing the particle diameter or increasing air flow velocity or decreasing the bed length will reduce the influence of axial heat conduction in the bed. Moreover, it has been found that the difference in the bed performance evaluated due to the absence of axial heat conduction in the bed is notably decreasing with the decrease in the number of transfer units of heat or mass. From this study, it is recommended to consider the axial heat conduction term when number of transfer units of mass and heat are greater than unity. © 2013 Elsevier Masson SAS. All rights reserved.
Adsorption and desorption through packed and fluidized clay-based composite desiccant beds: a comparison study
(Springer Science and Business Media Deutschland GmbH, 2022) Hiremath, C.R.; Kadoli, R.
The present study considers the composite desiccant employing horse dung, sawdust with clay and later impregnating CaCl2 into the host material. The microscopic and spectroscopic experimental methods such as scanning electron microscope (SEM) and X-ray diffraction (XRD) were used to characterize the composite desiccants. The specific heat (Cp) quantification reveals higher values for clay-additives composite desiccants with lower pore volume and larger grain sizes, whereas lower values for clay composite desiccants with higher pore volume and smaller grain sizes. Adsorption–desorption experiments for moisture removal and addition are conducted in a vertical column in static and fluidized states. The desiccant beds are subjected to an initially set value of process air velocity, relative humidity, temperature and mass of bed. Moisture removal capacity, moisture addition capacity and mass transfer coefficient are the parameter indices adopted to measure the heat and mass transfer characteristics of vertical packed and fluidized bed comprising clay-additives-CaCl2 composite desiccants. Comparing packed and fluidized beds, a higher surface area of bed in fluidization improves dehumidification performance and results in higher desorption rates. Experimental results confirmed that clay and clay-additives-based desiccants have desired adsorption–desorption characteristics of a suitable desiccant. The interesting advantage of fabricated clay and clay-additives-based composite adsorbents is that the air exits the desiccant bed at a lower temperature, saving cooling energy requirements of sorption-based systems. © 2022, The Author(s), under exclusive licence to The Brazilian Society of Mechanical Sciences and Engineering.

Faculty Publications

Browse

Filters

Settings

Sort By

Results per page

Search Results