Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
10 results
Search Results
Item An experimental investigation of the sound level produced by bulldozers with various maintenance schedules(Inderscience Publishers, 2008) Vardhan, H.; Raj, M.G.This study was made to understand and evaluate the effect of maintenance on noise production from bulldozers through experimental measurements of sound levels in a large open cast mine. Assessment of sound pressure levels at each periodic maintenance interval revealed that maximum sound level reduction was achieved at 1000 h maintenance schedule. For other periodic maintenance intervals, reduction in A-weighted sound pressure level was below 1.0 dB. The study revealed that primarily, the major noise-generating systems in Heavy Earth Moving Machinery (HEMM) are air, exhaust, cooling and fuel systems. However, maintenance of lubricant, transmission and hydraulic systems yielded no significant improvements in sound levels. Results also indicated sound level emissions from various systems to lie in different frequency ranges. © 2008, Inderscience Publishers.Item Sound radiation and transmission loss characteristics of a honeycomb sandwich panel with composite facings: Effect of inherent material damping(Academic Press, 2016) Arunkumar, M.P.; Jagadeesh, M.; Jeyaraj, J.; Gangadharan, K.V.; Mailan Chinnapandi, M.C.L.This paper presents the results of numerical studies carried out on vibro-acoustic and sound transmission loss behaviour of aluminium honeycomb core sandwich panel with fibre reinforced plastic (FRP) facings. Layered structural shell element with equivalent orthotropic elastic properties of core and orthotropic properties of FRP facing layer is used to predict the free and forced vibration characteristics. Followed by this, acoustic response and transmission loss characteristics are obtained using Rayleigh integral. Vibration and acoustic characteristics of FRP sandwich panels are compared with aluminium sandwich panels. The result reveals that FRP panel has better vibro-acoustic and transmission loss characteristics due to high stiffness and inherent material damping associated with them. Resonant amplitudes of the response are fully controlled by modal damping factors calculated based on modal strain energy. It is also demonstrated that FRP panel can be used to replace the aluminium panel without losing acoustic comfort with nearly 40 percent weight reduction. © 2016 Elsevier LtdItem Sound transmission loss characteristics of sandwich aircraft panels: Influence of nature of core(SAGE Publications Ltd info@sagepub.co.uk, 2017) Arunkumar, M.P.; Jeyaraj, J.; Gangadharan, K.V.; Mailan Chinnapandi, M.C.Sandwich panel which has a design involving acoustic comfort is always denser and larger in size than the design involving mechanical strength. The respective short come can be solved by exploring the impact of core geometry on sound transmission characteristics of sandwich panels. In this aspect, the present work focuses on the study of influence of core geometry on sound transmission characteristics of sandwich panels which are commonly used as aircraft structures. Numerical investigation has been carried out based on a 2D model with equivalent elastic properties. The present study has found that, for a honeycomb core sandwich panel in due consideration to space constraint, better sound transmission characteristics can be achieved with lower core height. It is observed that, for a honeycomb core sandwich panel, one can select cell size as the parameter to reduce the weight with out affecting the sound transmission loss. Triangular core sandwich panel can be used for low frequency application due to its increased transmission loss. In foam core sandwich panel, it is noticed that the effect of face sheet material on sound transmission loss is significant and this can be controlled by varying the density of foam. © 2016, © The Author(s) 2016.Item Vibro-acoustic response and sound transmission loss characteristics of truss core sandwich panel filled with foam(Elsevier Masson SAS 62 rue Camille Desmoulins Issy les Moulineaux Cedex 92442, 2018) Arunkumar, M.P.; Jeyaraj, P.; Gangadharan, K.V.; Mailan Chinnapandi, M.C.This paper presents the studies carried out for improving the acoustic behavior of truss core sandwich panel, which is mostly used in aerospace structural applications. The empty space of the truss core is filled with polyurethane foam (PUF) to achieve better vibro-acoustic and sound transmission loss characteristics. Initially equivalent elastic properties of the foam filled truss core sandwich panel are calculated. Then, the vibration response of the panel under a harmonic excitation is obtained based on the equivalent 2D finite element model. Finally, the vibration response is given as an input to the Rayleigh integral code built in-house to obtain the acoustic and sound transmission loss characteristics. The results revealed that PUF filling of the empty space of the truss core, significantly reduces resonant amplitudes of both vibration and acoustic responses. It is also observed that foam filling reduces the overall sound power level significantly. Similarly, sound transmission loss studies revealed that, sudden dips at resonance frequencies are significantly reduced. Also an experiment is conducted on forced vibration response of honeycomb core sandwich panel to show that equivalent 2D model can be used for predicting sound power level and transmission loss behavior. © 2018 Elsevier Masson SASItem Acoustic radiation and transmission loss of FG-Graphene composite plate under nonuniform edge loading(Elsevier Ltd, 2021) Gunasekaran, V.; Jeyaraj, J.; Mailan Chinnapandi, L.B.The influence of nonuniform edge loads on the acoustic response of a functionally graded graphene reinforced composite plate is investigated analytically. The energy method is implemented to calculate the buckling load (Pcr). An analytical method based on Reddy's third-order shear deformation theorem is used to obtain the vibration response, and acoustic response is obtained using Rayleigh Integral. The nature of edge load variation on buckling and vibro-acoustic response is significant. Free vibration mode shape changes with an increase in edge load and consequently affects the resonant amplitude of responses also especially for the plates with a higher aspect ratio. Volume fraction and dispersion pattern of graphene nano-platelets also influences the resonance amplitudes. Plate with FG?GRCC dispersion pattern has improved buckling and vibro-acoustic response behavior. Similarly, change in sound transmission loss level is significant in the stiffness region compared to the damping and mass dominated region. © 2021 Elsevier Masson SASItem Acoustic fluid–structure study of 2D cavity with composite curved flexible walls using graphene platelets reinforcement by higher-order finite element approach(Elsevier Ltd, 2021) Jeyaraj, J.; Gupta, P.; Vasudevan, V.; Polit, O.; Manickam, G.In the present study, acousto-vibration analysis of 2D fluid-filled cavities/tanks having flat and curved flexible walls is made using a trigonometric function based shear deformable theory and the Helmholtz wave model for fluid domain. The governing equation formed here is solved through higher-order finite element approach. The walls are modeled by C1 continuous 3-noded beam element and the fluid is idealized using an eight-noded quadrilateral element. Structural and coupled frequencies are evaluated for fluid-filled cavities with rigid/flexible vertical walls along with flat/curved beam on top. The sound pressure level is also predicted in the fluid domain due to a steady-state mechanical harmonic load on the top of the cavity. This investigation is conducted for metallic cavities and then extended to graphene platelets reinforced cavity. The effect of degree of fluid–structure coupling is examined assuming different fluid domains. Considering a wide range of cavity geometry and material parameters such as thickness ratio, curved beam angle, graded porosity and graphene platelets, porosity coefficient, loading of GPL, fluid medium, a comprehensive investigation is depicted to highlight their impacts on vibro-acoustic nature of fluid-filled cavities. It is observed that the dynamic characteristics of rigid and flexible wall cavities are significantly different from each other. © 2021 Elsevier LtdItem Sound absorption and transmission loss characteristics of 3D printed bio-degradable material with graded spherical perforations(Elsevier Ltd, 2022) Sailesh, R.; Yuvaraj, L.; Doddamani, M.; Mailan Chinnapandi, L.B.M.; Jeyaraj, J.The influence of spherical bubble perforations and their grading on acoustic characteristics of a 3D printed bio-degradable material is investigated. Samples with spherical bubble perforations of different sizes are distributed either uniformly or graded across the specimen thickness. A sample having typical cylindrical perforations is also analyzed for comparative analysis. Sound absorption (SA) and sound transmission loss (STL) characteristics are estimated by the impedance tube method. The results reveal that the SA of all functionally graded (FG) perforations is higher at low frequencies. The SA and bandwidth are higher for a specimen with uniform, lower diameter bubbles at higher frequencies. The STL of FG perforations is highest among the specimens, and the difference increases significantly with frequency. The numerical and experimental results match a high degree of accuracy. FG perforations exhibited superior performance for both SA and STL. The proposed graded spherical porosity can be effectively utilized in soundproofing applications across building and transportation sectors. © 2021 Elsevier LtdItem Structural-Acoustic Response Analysis of Variable Stiffness Laminates with Inherent Material Damping(World Scientific, 2022) Gunasekaran, V.; Gulhane, S.; Gupta, S.; Jeyaraj, J.; Vasudevan, V.; Manickam, G.Sound radiation and transmission loss characteristics of variable stiffness composite plate reinforced with the curvilinear fibers are investigated numerically. The formulation is developed using higher-order shear flexible finite element model combined with Helmholtz wave equation. The governing equations obtained using Hamilton's approach are further solved through the modal super position method to analyze the vibration response under steady state excitation. The inherent material damping of the laminate is accounted through the modal damping calculated using the modal strain energy approach. The acoustic pressure of the variable stiffness laminates is estimated using the Raleigh integral. Subsequently, acoustic response characteristics such as acoustic power level, radiation efficiency, directivity pattern, and transmission loss from the laminates are predicted using the estimated sound pressure for various forcing frequencies. A parametric study covering a wide range of design variables including center and edge fiber angles, lamination scheme, thickness ratio, and boundary conditions on the acoustic sound behavior arising from the vibration of curvilinear fiber composite plate is detailed. This study reveals that the acoustic response of the curvilinear fiber composite plate is significantly influenced by the curvilinear fiber angles at the center/edge fiber angle of the layers. It is hoped that the results obtained here will be useful for designers in developing structures with desired acoustic response characteristics. © 2022 World Scientific Publishing Company.Item Sound radiation and transmission behavior of auxetic core quadrilateral sandwich panels under supersonic flow(Taylor and Francis Ltd., 2025) Prajapati, V.K.; Jeyaraj, P.; Mailan Chinnapandi, L.B.Vibroacoustic performance of a quadrilateral sandwich plate under the synergetic effect of aerodynamic pressure and harmonic excitation is analyzed numerically. Layered approach is adopted to model the sandwich plate by considering the equivalent properties of the core and facings. Governing equations, developed utilizing Hamilton’s principle are solved based on differential quadrature approach to analyze the flutter frequency and forced vibration response. Subsequently, Rayleigh integral is used to estimate the acoustic response characteristics. Effect of geometric properties of the core (cell size, wall thickness, and inclined angle) and plate (leading, and trailing-edge angles) is examined. Critical aerodynamic pressure (CAP) is calculated first for the given case and the changes in response characteristics are investigated by varying the CAP. Results indicate that geometric parameters of the core does not influence the CAP, while the core thickness and the leading and trailing edge angles have significant effects. The sound power level (SWL) and transmission loss are observed to be maximum at CAP except in some cases of leading and trailing edge angles. © 2025 Taylor & Francis Group, LLC.Item Thermal stability and sound absorption in perforated areca sheath-epoxy composite materials(Springer Science and Business Media B.V., 2025) Varghese, L.; Kumar, G.C.The present work emphasizes developing epoxy composites using areca sheath particulates, focusing on improving the thermal and acoustic properties. These composites are developed using conventional methods, and followed by surface modification by different types of perforations using pin perforation techniques. The sound absorption characteristics of these specimens were evaluated using an impedance tube, while thermal stability through thermogravimetric analysis and microstructural properties were analyzed. The results indicate that composite specimens with only half of the area perforated with 1 mm diameter holes demonstrate a superior sound absorption range compared to other specimens. The influence of perforation patterns on specimen surfaces was also studied. Additionally, the thermogravimetric analysis of composites reveals that the developed materials possess significant thermal stability, making them more suitable for thermal and acoustic applications in public buildings and auditoriums than other lightweight composites. © The Author(s), under exclusive licence to Springer Nature Switzerland AG 2025.