Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Subject: search.filters.subject.Acid mixtures

Search Results

Now showing 1 - 2 of 2
  • No Thumbnail Available
    Item
    Corrosion inhibition of 6061 Al-15 vol. pct. SiC(p) composite and its base alloy in a mixture of sulphuric acid and hydrochloric acid by 4-(N,N-dimethyl amino) benzaldehyde thiosemicarbazone
    (2011) Geetha, G.M.; Nayak, J.; Nityananda Shetty, A.N.
    The corrosion inhibition characteristics of 4-(N,N-dimethylamino) benzaldehyde thiosemicarbazone (DMABT) on the corrosion behavior of 6061 Al-15 vol. pct. SiC(p) composite and its base alloy were studied at different temperatures in acid mixture medium containing varying concentrations of hydrochloric acid and sulphuric acid using Tafel extrapolation technique and ac impedance spectroscopy (EIS). The effect of inhibitor concentration, temperature and concentration of the acid mixture media on the inhibitor action was investigated. It was found that inhibition efficiencies increase with the increase in inhibitor concentration, but decrease with the increase in temperature and with the increase in concentration of the acid media. Thermodynamic parameters for dissolution process were determined. The adsorption of DMABT on both the composite and base alloy was found to be through physisorption obeying Freundlich adsorption isotherm. © 2010 Elsevier B.V. All rights reserved.
  • No Thumbnail Available
    Item
    Durable and high energy yielding PANI/Ni(OH)2 nanocomposites and its supporting electrolyte improved supercapacitance
    (Elsevier Ltd, 2024) Viswanathan, A.; Nityananda Shetty, A.N.
    The driving force behind supercapacitor research is to enhance the energy density (E) to the level of Li-ion batteries, and achieving high power density (P). This task is accomplished by using nanocomposites of polyaniline (PANI) and Ni(OH)2 (PN) as the electrode material for supercapacitors. These nanocomposites were synthesized using acetic acid (PN - AA) (PANI 75% and Ni(OH)2 25%) and methane sulphonic acid (PN - MSA) (PANI 83.33% and Ni(OH)2 16.67%) as dopants for PANI through an in-situ single-step method. The PN – MSA exhibited higher energy storage characters than PN – AA with 1 M H2SO4 (SA) as electrolyte. PN - MSA exhibited high-energy characteristics, including a specific capacitance (Cs) of 735.29 F g‒1, an energy density (E) of 147.05 W h kg‒1 (comparable to Li-ion batteries), and a power density (P) of 2.3466 kW kg‒1 at 1 A g‒1. In addition, it also exhibited an exceptional cyclic stability up to 58,800 cycles at 0.4 V s‒1. The energy characters of PN-AA are also substantially high and are a Cs of 641.02 F g‒1, an E of 128.20 W h kg‒1 (in the same order of Li-ion batteries), a P of 2.0385 kW kg‒1 at 1 A g‒1 and a cyclic stability up to 18,400 cycles was also obtained at 0.4 V s‒1. Both PN - AA and PN - MSA demonstrated an impressive feature of an increase in energy storage with an increase in the number of charge/discharge cycles. PN - MSA exhibited an improvement in energy storage characteristics of up to 44% when a mixture of sulphuric acid and methane sulphonic acid with concentrations of 1 M and 0.33 M, respectively, was used as an electrolyte. © 2024 Elsevier Ltd