Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
78 results
Search Results
Item Vibration Analysis of FGM Plates Resting on Elastic Foundation in Thermal Environment Using Element-Free Galerkin (EFG) Meshless Solution(Springer Science and Business Media Deutschland GmbH, 2024) K P, K.P.; Indu, N.; Swaminathan, K.The present paper deals with the effect of temperature on the vibration characteristics of functionally graded plates resting on two-parameter elastic foundations. The temperature-dependent mechanical properties of the plates are assumed to vary through thickness. The present solutions are derived using an element-free Galerkin (EFG) meshless method. Using the EFG solution method, the numerical results are presented and compared with those available in the literature. Results show that the foundation stiffness, temperature, and other parameters have a significant influence on the vibration response of functionally graded plates resting on elastic foundation. © The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd. 2024.Item Analytical solutions using a higher order refined computational model with 12 degrees of freedom for the free vibration analysis of antisymmetric angle-ply plates(2008) Swaminathan, K.; Patil, S.S.Analytical formulations and solutions to the natural frequency analysis of simply supported antisymmetric angle-ply composite and sandwich plates hitherto not reported in the literature based on a higher order refined computational model with 12 degrees of freedom already reported in the literature are presented. The theoretical model presented herein incorporates laminate deformations which account for the effects of transverse shear deformation, transverse normal strain/stress and a nonlinear variation of in-plane displacements with respect to the thickness coordinate thus modelling the warping of transverse cross sections more accurately and eliminating the need for shear correction coefficients. In addition, another higher order computational model with five degrees of freedom already available in the literature is also considered for comparison. The equations of motion are obtained using Hamilton's principle. Solutions are obtained in closed-form using Navier's technique by solving the eigenvalue equation. Plates with varying slenderness ratios, number of layers, degrees of anisotropy, edge ratios and thickness of core to thickness of face sheet ratios are considered for analysis. Numerical results with real properties using above two computational models are presented and compared for the free vibration analysis of multilayer antisymmetric angle-ply composite and sandwich plates, which will serve as a benchmark for future investigations. © 2007 Elsevier Ltd. All rights reserved.Item Higher order refined computational models for the free vibration analysis of antisymmetric angle ply plates(2008) Swaminathan, K.; Patil, S.S.Analytical formulations using two higher order refined displacement models have been developed and solutions presented for the first time to the natural frequency analysis of antisymmetric angle-ply composite and sandwich plates. These computational models already reported in the literature are based on Taylor's series expansion of the displacements in the thickness coordinate and consider the realistic parabolic distribution of transverse shear strains through the laminate thickness. One of them, with 12 degrees of freedom, considers the effects of both transverse shear and normal strain/stress while the other with 9 degrees of freedom includes only the effect of transverse shear deformation. In addition to above, a few higher order models and the first order model developed by other investigators and available in the literature are also considered for the evaluation. A simply supported plate is considered throughout as a test problem. The equations of motion are obtained using Hamilton's principle. Solutions are obtained in closed form using Navier's technique by solving the eigenvalue equation. Plates with varying slenderness ratios, number of layers, fiber orientations, degrees of anisotropy, edge ratios and thickness of core to thickness of face sheet ratios are considered for the analysis. Accuracy of the theoretical formulations and the solution method is first ascertained by comparing the results with those already available in the literature. After establishing the accuracy of the solutions, extensive numerical results are presented for the free vibration analysis of multilayer antisymmetric angle-ply composite and sandwich plates using all the models, which will serve as a benchmark for future investigations. © SAGE Publications 2008.Item Free vibration studies of box type laterite masonry structures(2012) Unnikrishnan, S.; Narasimhan, M.C.; Venkataramana, K.Box-type laterite masonry structures are widely seen in south-west coastal areas of India. Not many studies are available in the literature on the dynamic response of such structures. Free vibration analysis of box-type laterite masonry structures has been attempted in this study, as a preliminary to a detailed dynamic analysis. Finite element analysis has been conducted to And the natural frequencies and corresponding mode shapes of box-type laterite masonry buildings. Results of detailed parametric studies conducted to find the effect of various parameters like modulus of elasticity of laterite masonry, provision of a lintel band or a roof slab, openings in long walls and aspect ratio on the natural frequencies and their mode shapes of box-type laterite masonry buildings are presented and discussed in this paper.Item Synergy of fiber length and content on free vibration and damping behavior of natural fiber reinforced polyester composite beams(Elsevier Ltd, 2014) Krishnasamy, K.; Siva, I.; Jeyaraj, P.; Winowlin Jappes, J.T.; Amico, S.C.; Nagarajan, N.This work addresses the results of experimental investigation carried out on free vibration characteristics of short sisal fiber (SFPC) and short banana fiber (BFPC) polyester composites. Influence of fiber length and weight percentage on mechanical properties and free vibration characteristics are analyzed. Composite beam specimen is fabricated with random fiber orientations at17. MPa compression using compression molding machine. Natural frequencies and associated modal damping values of the composite laminates were obtained by carrying out the experimental modal analysis. It is found that an increase in fiber content increases the mechanical and damping properties. For SFPC, 3. mm fiber length and 50. wt% fiber content yielded better properties, whereas for BFPC, 4. mm fiber length and 50. wt% fiber content was the best combination. Scanning electron microscopy was performed to study the interfacial mechanism. © 2013 Elsevier Ltd.Item Fault diagnosis of deep groove ball bearing through discrete wavelet features using support vector machine(COMADEM International rajbknrao@btinternet.com, 2014) Vernekar, K.; Kumar, H.; Gangadharan, K.V.Bearings are the most important and frequently used machine components in most of the rotating machinery. In industry, breakdown of such crucial components causes heavy losses. So prevention of failure of such components is very essential. This paper presents an online fault detection of a bearing used in an internal combustion engine through machine learning approach using vibration signals of bearing in healthy and simulated faulty conditions. Vibration signals are acquired from bearing in healthy as well as different simulated fault conditions of bearing. The Discrete Wavelet Transform (DWT) features were extracted from vibration signals using MATLAB program. Decision tree technique (J48 algorithm) has been used for important feature selection out of extracted DWT features. Support vector machine is being used as a classifier and obtained results found with classification accuracy of 98.67%.The advantage of machine learning technique for fault diagnosis over conventional vibration analysis approach has demonstrated in this paper.Item Influence of redmud on the mechanical, damping and chemical resistance properties of banana/polyester hybrid composites(Elsevier Ltd, 2014) Veerasimman, V.; Marimuthu, M.; Manikandan, V.; Nagarajan, N.; Jeyaraj, P.A novel hybrid composite was developed with the addition of redmud as secondary reinforcing filler with banana fiber reinforced polyester composites (BFRPCs). The effect of varying parameters such as particle size (4, 6 and 13. ?m) and weight percentage (2, 4, 6, 8 and 10. wt%) of redmud were analyzed on static mechanical, free vibration and chemical resistance properties of hybrid composites. The addition of redmud shown enhanced performance compared to the virgin BFRPCs in all the above said properties. The maximum increase of 50% in mechanical strength was observed for the BFRPCs with the addition of redmud having 4. ?m particle size and 8. wt% of filler content compared to pure BFRPCs. The increased value of fundamental natural frequencies with associated modal damping characteristics of redmud filled BFRPCs were found using half-power band width method. All the fabricated composites performed well against various chemicals and it indicates that the resistance to the weight loss is due to the uniformly distributed redmud. To study the effect of redmud on interfacial bonding between the banana fiber and polyester matrix the Scanning Electron Microscope (SEM) image analysis was performed. © 2014 Elsevier Ltd.Item Bearing health condition monitoring: Wavelet decomposition(Indian Society for Education and Environment indjst@gmail.com, 2015) Shanmukha Priya, V.; Mahalakshmi, P.; Naidu, V.P.S.Background/Objectives: Condition monitoring is one of the important functions to be carried out in the maintenance of any machine. In condition monitoring, there are several techniques among which the most commonly used technique for rotating machines is the vibration analysis. Methods/Statistical analysis: Discrete Wavelet Transform is used to decompose the vibration signal into 9 levels. For each level, mean ±std (standard deviation) are computed for both approximated and detailed coefficients. Findings: Bearing data obtained from the bearing test rig of Case Western Reserve University are used to test the algorithm. The standard of coefficients in level to 3 shows distant classification of faults. The levels which show clear classification among the bearings are those frequency bands in which the characteristic defect frequencies of faults occur. It is inferred that, the wavelet decomposition classifies the ball defect clearly than the frequency domain methods. Application/Improvements: Wavelet based bearing health condition monitoring technique can be used for bearing fault diagnosis and it can be extended for prognosis.Item Vibration analysis of a tapered laminated thick composite plate with ply drop-offs(Springer Verlag service@springer.de, 2015) Edwin Sudhagar, P.; Arumugam, A.; Vasudevan, R.; Jeyaraj, J.In this study, vibration characteristics of a tapered laminated thick composite plate have been investigated using finite element method by including the shear deformation and rotary inertia effects. The governing differential equations of motion of a tapered laminated thick composite plate are presented in the finite element formulation based on first-order shear deformation theory for three types of taper configurations. The effectiveness of the developed finite element formulation in identifying the various dynamic properties of a tapered laminated thick composite plate is demonstrated by comparing natural frequencies evaluated using the present FEM with those obtained from the experimental measurements and presented in the available literature. Various parametric studies are also performed to investigate the effect of taper configurations, aspect ratio, taper angle, angle ply orientation and boundary conditions on free and forced vibration responses of the structures. The comparison of the transverse free vibration mode shapes of the uniform and tapered composite plates under various boundary conditions is also presented. The forced vibration response of a composite plate is investigated to study the dynamic response of tapered composite plate under the harmonic force excitation in various tapered configurations. It is concluded that the dynamic properties of laminated thick composite plates could be tailored by dropping off the plies to yield various tapered composite plate. © 2015, Springer-Verlag Berlin Heidelberg.Item Design and development of a model free robust controller for active control of dominant flexural modes of vibrations in a smart system(Academic Press, 2015) Parameswaran, A.P.; Ananthakrishnan, B.; Gangadharan, K.V.Real physical vibrating smart systems exhibit a lot of nonlinearities in their dynamics. Undesirable vibrations, particularly in the regions of first as well as second resonance, play a very important role in deteriorating the stability of the system as well as its operational efficiency. The work presented in the paper focuses on an analytical technique of mathematical modeling of a vibrating piezoelectric laminate cantilever beam which is considered to be the smart system. The natural frequencies of the vibrating smart system are determined from the ANSYS simulation studies and experimentally, it is found that the vibrations induced voltage is maximum at the first followed by the second natural frequencies. Hence, the smart system is modeled analytically through finite element technique using the Euler-Bernoulli beam theory for the first two flexural modes of vibrations. To account for the possible nonlinearities, a suitable robust controller is designed based on sliding mode technique. Simulation studies on the developed analytical model indicated a high performance of the designed controller in controlling the vibrations at first and second resonance regions. Also, the designed controller was found to be effective in its operations when the excitation varied over a large range covering the first two natural frequencies. In the final stage, the designed robust controller was successfully prototyped on a Field Programmable Gate Array (FPGA) platform using LabVIEW coupled with Compact Reconfigurable Input Output (cRIO-9022) controller configured in its FPGA interface mode and the resulting robust FPGA controller successfully controlled the occurring system vibrations. © 2015 Elsevier Ltd.