Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
20 results
Search Results
Item Dynamic Response of Soil Nailed Wall(Springer Science and Business Media Deutschland GmbH, 2021) Amrita; Jayalekshmi, B.R.; Shivashankar, R.Soil nailing is a technique used to stabilize steep cut slopes and to retain excavations. The method consists of inserting nail bars into the ground to stabilize the soil mass. The present study evaluates the dynamic response of a soil nailed wall supporting a vertical cut of height 6 m. The finite element analysis has been carried out to study the stability and performance of the soil nailed wall using PLAXIS 2D software. The seismic resistance and failure mechanism of the wall are analyzed under the El Centro ground motion. The seismic response variation for different parameters such as angle of inclination of nail and length of nail is studied. The results are observed in terms of maximum lateral displacement, development of maximum tensile force in nails and failure mechanism of soil nailed wall under static and dynamic conditions. The results of the study indicate that the soil nailed structure is an effective method which imparts stability to the retaining system under dynamic conditions. © 2021, The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.Item Effect of containment reinforcement on the seismic response of box type laterite masonry structures-an analytical evaluation(2013) Unnikrishnan, S.; Narasimhan, M.C.; Venkataramana, K.Laterite blocks are used for construction of masonry walls since ages in the South-western coastal areas of India. The south-west coastal areas of India lie in zone III of seismic zonation map of Indian code IS 1893-2002. In spite of the fact that laterite is the most favored masonry material in these regions of India, the structural performance of laterite masonry has not been systematically investigated. Again there are no previous studies addressing, in detail, the seismic performance of laterite masonry buildings. Now that these areas are becoming more and more important from point of view of trade and commerce, there is a need for a detailed research on the seismic response of laterite masonry structures located in these areas. The present paper reports the results of such a study of the seismic response of box-type laterite masonry structures. Time history analysis of these structures under El-Centro acceleration has been performed using commercial finite element software ANSYS. Effect of 'containment reinforcement' on the seismic response of box type laterite masonry structures has been evaluated. © 2013 Techno-Press, Ltd.Item Seismic response analysis of reinforced concrete frames including soil flexibility(Techno-Press, 2013) Jayalekshmi, B.R.; Deepthi Poojary, V.G.; Venkataramana, K.; Shivashankar, R.The seismic response of RC space frame structures with isolated footing resting on a shallow soil stratum on rock is presented in this paper. Homogeneous soil stratum of different stiffness in the very soft to stiff range is considered. Soil, footing and super structure are considered to be the parts of an integral system. A finite element model of the integrated system is developed and subjected to scaled acceleration time histories recorded during two different real earthquakes. Dynamic analysis is performed using mode superposition method of transient analysis. A parametric study is conducted to investigate the effect of flexibility of soil in the dynamic behaviour of low-rise building frames. The time histories and Fourier spectra of roof displacement, base shear and structural response quantities of the space frame on compliant base are presented and compared with the fixed base condition. Results indicate that the incorporation of soil flexibility is required for the realistic estimate of structural seismic response especially for single storey structures resting on very soft soil. Copyright © 2013 Techno-Press, Ltd.Item Dynamic soil-structure interaction studies on 275m tall industrial chimney with openings(Techno Press technop2@chollian.net, 2014) Jayalekshmi, B.R.; Thomas, A.; Shivashankar, R.In this paper, a three dimensional soil-structure interaction (SSI) is numerically simulated using finite element method in order to analyse the foundation moments in annular raft of tall slender chimney structures incorporating the effect of openings in the structure and the effect of soil flexibility, when the structure-soil system is subjected to El Centro (1940) ground motion in time domain. The transient dynamic analysis is carried out using LS-DYNA software. The linear ground response analysis program ProShake has been adopted for obtaining the ground level excitation for different soil conditions, given the rock level excitation. The radial and tangential bending moments of annular raft foundation obtained from this SSI analysis have been compared with those obtained from conventional method according to the Indian standard code of practice, IS 11089:1984. It is observed that tangential and radial moments increase with the increase in flexibility of soil. The analysis results show that the natural frequency of chimney decreases with increase in supporting soil flexibility. Structural responses increase when the openings in the structure are also considered. The purpose of this paper is to propose the need for an accurate evaluation of the soil-structure interaction forces which govern the structural response. © 2014 Techno-Press, Ltd.Item Seismic behavior of rc framed shear wall buildings as per is 1893 and IBC provisions(Techno-Press, 2015) Jayalekshmi, B.R.; Chinmayi, H.K.Usually the analyses of structures are carried out by assuming the base of structures to be fixed. However, the soil beneath foundation alters the earthquake loading and varies the response of structure. Hence, it is not realistic to analyze structures by considering it to be fixed. The importance of soil-structure interaction was realized from the past failures of massive structures by neglecting the effect of soil in seismic analysis. The analysis of massive structures requires soil flexibility to be considered to avoid failure and ensure safety. Present study, considers the seismic behavior of multi-storey reinforced concrete narrow and wide buildings of various heights with and without shear wall supported on raft foundation incorporating the effect of soil flexibility. Analysis of the three dimensional models of six different shear wall positions founded on four different soils has been carried out using finite element software LS DYNA. The study investigates the differences in spectral acceleration coefficient (Sa/g), base shear and storey shear obtained following the seismic provisions of Indian standard code IS: 1893 (2002) (IS) and International building code IBC: 2012 (IBC). The base shear values obtained as per IBC provisions are higher than IS values. © 2015 Techno-Press, Ltd.Item Soil–Structure Interaction Effect on Seismic Force Evaluation of RC Framed Buildings with Various Shapes of Shear Wall: As Per IS 1893 and IBC(Springer India sanjiv.goswami@springer.co.in, 2015) Jayalekshmi, B.R.; Chinmayi, H.K.Behaviour of a structure is altered by the interaction amid the structure, foundation and the soil medium below the foundation. This mutual dependent behaviour of structure and soil is called as soil–structure interaction (SSI). Hence, it is not realistic to analyse a structure as per conventional structural design practice which considers the base to be fixed. Comparative study on seismic provisions of Indian seismic code, IS 1893:2002 (IS) and International building code IBC:2006 (IBC) is carried out in present study to look into the effect of soil flexibility on variation in natural period, spectral acceleration coefficient, base shear and storey shear. Multi-storey reinforced concrete framed buildings of varying height with various shapes of shear walls over raft foundation were considered. Analysis of 3D SSI models with three different shear wall shapes founded on four different soil types which are classified based on shear wave velocity has been carried out using finite element software LS DYNA. Study shows the significant effects of SSI in altering the seismic response of structure. It also shows that the base shear obtained as per IBC are higher than the IS values and the corrugated shape of shear wall experience the lowest base shear compared to cylindrical and rectangular shape shear walls for buildings with aspect ratio below 3. © 2014, Indian Geotechnical Society.Item Dynamic soil-structure interaction analysis of RC framed building with various positions of shear walls(CAFET INNOVA Technical Society 1-2-18/103, Mohini Mansion, Gagan Mahal Road, Domalguda, Hyderabad 500029, 2016) Chinmayi, H.K.; Jayalekshmi, B.R.In the present study, a three-dimensional dynamic soil-structure interaction analysis of symmetric buildings in time domain is performed using IS spectrum ground motion record corresponding to zone III to evaluate the dynamic response of structure-foundation-soil system. Three types of shear wall buildings of aspect ratio 1, 1.5, 2, 3 and 4 categorized based on the shear wall locations were considered in conjunction with four types of soil of shear wave velocities ranging from 150m/s to 1200 m/s, symbolizing soil classes B, C, D and E of FEMA-356: 2000. Integrated structure-foundation-soil systems were analyzed using commercial finite element software LSDYNA, based on direct method of soil-structure interaction (SSI) assuming linear elastic behavior. The study shows considerable variation in dynamic characteristics and structural seismic response of the structure due to the incorporation of the effect of flexibility of soil and position of shear walls. Tall buildings with shear walls placed at the exterior corners experience the least base shear. © 2016 CAFET-INNOVA TECHNICAL SOCIETY. All rights reserved.Item Probabilistic Seismic Hazard Assessment of Mangalore and Its Adjoining Regions, A Part of Indian Peninsular: An Intraplate Region(Birkhauser Verlag AG, 2019) Shreyasvi, C.; Venkataramana, K.; Chopra, S.; Rout, M.M.The Southwestern part of India investigated in the present study mainly comprises of states such as Goa, north Kerala and a major portion of Karnataka. A comprehensive regional seismic catalog has been compiled spanning over 190 years apart from a few prehistoric events from the early 16th century. The classical Cornel–McGuire approach has been incorporated in the estimation of seismic hazard. The seismic sources are modeled as area sources and the entire study region is divided into four seismogenic source zones. The uncertainties involved in the formulation of the seismic source model and ground motion prediction model has been discussed in detail. Further, the procedure for selecting appropriate GMPEs involves the evaluation of multidimensional (M, R, T) ground motion trends and performance against observed macroseismic data. The epistemic uncertainty in the estimation of seismicity parameters and ground motion prediction equations (GMPEs) has been addressed using logic tree computation. The results of the hazard analysis demonstrate that the existing seismic code underestimates the seismic potential of seismic zone II (BIS 1893) areas. The de-aggregation of the predicted seismic hazard revealed earthquakes of magnitude range (Mw) 4–6 occurring within a distance of 35kms to be most influential for any given site of interest. Sensitivity analysis has been performed for crucial input parameters in the formulation of seismic source and ground motion models. Site amplification study has been carried out using topographic slope as a proxy to shear velocity in the top 30 m (Vs30). A maximum of 60% to 80% amplification has been observed in the study area. The seismic hazard maps in terms of PGA have been plotted for the seismic hazard estimated at the bedrock level as well as the surface level for 2% and 10% probability of exceedance in 50 years. The hazard estimation specifically for the southern part of the west coast is the first of its kind. The investigation suspects mining-induced seismicity in Bellary and Raichur districts though there is no mention of this in the prior literature. © 2019, Springer Nature Switzerland AG.Item Local site effect incorporation in probabilistic seismic hazard analysis – A case study from southern peninsular India, an intraplate region(Elsevier Ltd, 2019) Shreyasvi, C.; Venkataramana, K.; Chopra, S.The inclusion of local site effects into seismic hazard analysis is an important issue and has been attempted previously in both deterministic and probabilistic manner. The present study is an attempt to combine the local site response with the standard probabilistic seismic hazard analysis. The site response was computed by performing an equivalent linear analysis in the frequency domain. The input soil profiles for the analysis were taken from the borehole data of the North Kerala region (one of the Southerly states in India). The uncertainty in estimating the shear velocity profile (VS) has been addressed by applying multiple VS–N correlations. The variability in the choice of input motions has been reduced by selecting multiple ground motions representing distinct hazard levels (return period of 50–2000 years). The uniform hazard spectrum developed for the host reference site conditions has been adjusted to the target region and the input motions are scaled accordingly. The analyzed soil profiles were categorized into three distinct soil types namely ‘Sand’, ‘Clay’ and ‘All soil’ based on the predominant soil content. The empirical amplification equation as a function of input rock spectral acceleration (Sa r) was developed for each soil type. ‘Sand’ exhibits nonlinear behavior for Sa r > 0.1 g whereas ‘clay’ demonstrates sustained amplification at longer periods. The average spectral amplification observed is 3 for ‘All soil’, 5 for ‘clay’ and 3.5 for ‘sand’ in the study region. The regionally developed amplification function aids in transforming a Ground Motion Prediction Equation (GMPE) from generic to site-specific. The modified GMPE is integrated with the regional seismic source model to estimate site-specific probabilistic seismic hazard. The study produces site-specific spectrum and surface hazard maps which can be of direct use to planners and designers in creating a seismic resilient built environment. © 2019 Elsevier LtdItem Probabilistic seismic hazard analysis of North and Central Himalayas using regional ground motion prediction equations(Springer Science and Business Media Deutschland GmbH, 2021) Ramkrishnan, R.; Kolathayar, S.; Sitharam, T.G.Recently developed region-specific GMPEs are used for a comprehensive seismic hazard analysis (SHA) of the North and Central Himalayas (NCH) using a probabilistic approach considering two source models. Vulnerable seismic sources in the areas are identified based on the Seismotectonic Atlas (Dasgupta et al. 2000), published by the Geological Survey of India. An up to date, homogenized and declustered earthquake catalogue is compiled from various sources, with earthquake data since 250 BC, to create a new digitized seismotectonic representation of the region. Regional seismic zones having similar seismicity are recognized based on the Gutenberg-Richter (GR) parameters and the region is delineated into 5 seismic zones. The study area is divided into grids of size 0.05° × 0.05° and the hazard in terms of Peak Ground Acceleration (PGA) at the centre of each grid point is estimated and presented as hazard maps for individual seismic sources, maximum of all sources, and average of both sources. From the current study, it could be concluded that the PGA estimated in the regions is comparatively higher than what is reported in the codal provisions for seismic zonation and estimation of design horizontal acceleration for the region. © 2021, Springer-Verlag GmbH Germany, part of Springer Nature.