Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Has files: NoSubject: search.filters.subject.Piezoelectricity

Search Results

Now showing 1 - 10 of 34
  • No Thumbnail Available
    Item
    Analysis of piezoelectric composite beams and plates with multiple delaminations
    (2006) Raja, S.; Prathima Adya, H.P.; Viswanath, S.
    In the present work, the effect of delamination or debonding on the static and dynamic characteristics of laminated piezoelectric beams and plates is studied. A four-noded quadrilateral shear flexible plate element is developed to model the damages in composite substrate and in piezoelectric layers. The elastic stiffness and electro-elastic stiffness degradations are introduced at the elemental level through coupled constitutive relations. The undamaged structure is modeled as a single laminate while the delaminated region is modeled as sublaminates whose interface contains the desired delamination or debonding. The continuity of displacement is maintained across the delaminated edge by imposing the strain-based multipoint constraints. Numerical studies are conducted on composite specimens with surface bonded active layers. The results are presented to evaluate the performance of these smart structures in the presence of delamination. For actuators, the performance is measured in terms of the achievable deflection control and in sensors as a measurable output voltage. It is observed that actuator and sensor debonding degrade the capabilities of active materials significantly. Therefore, the study concludes that a damage tolerant approach is essential for the design of smart structural systems to account for damage-induced uncertainty in the functional properties of smart actuators and sensors. Copyright © 2006 SAGE Publications.
  • No Thumbnail Available
    Item
    Modeling of single and multilayer polyvinylidene fluoride film for micro pump actuation
    (2010) Karanth P, P.N.; Desai, V.; Kulkarni, S.M.
    Micro pumps are essential components of micro devices such as drug delivery systems. Large numbers of pumps have been proposed based on different actuating principles. Piezoelectric actuation offers advantages such as reliability and energy efficiency. Lead zirconate titanate (PZT) based piezoelectric actuation for micro pumps is predominantly explored despite its disadvantages such as brittle nature, low straining and difficulties in processing. Polymer piezoelectric materials like polyvinylidene fluoride (PVDF) could be promising replacements for PZT owing to their availability in form of films and good strain coefficients. Very limited literature on micro pump with PVDF as an actuator is available. In this paper, finite element analysis (FEA) model of a micro pump actuator using single and multilayer PVDF for actuation is developed in ANSYS. The model takes into account the influence of driving voltage and actuator. Copyright © Springer-Verlag 2009.
  • No Thumbnail Available
    Item
    Dielectric and piezoelectric properties of PVDF/PZT composites: A review
    (John Wiley and Sons Inc, 2015) Jain, A.; Prashanth, K.J.; Sharma, A.K.; Jain, A.; P.n, R.
    Smart materials, which exhibit piezoelectricity, find an eclectic range of applications in the industry. The direct piezoelectric effect has been widely used in sensor design, and the inverse piezoelectric effect has been applied in actuator design. Ever since 1954, PZT and BaTiO3 were widely used for sensor and actuator applications despite their toxicity, brittleness, inflexibility, etc. With the discovery of PVDF in 1969, followed by development of copolymers, a flexible, easy to process, nontoxic, high density alternate with high piezoelectric voltage coefficient was available. In the past 20 years, heterostructural materials like polymer ceramic composites, have received lot of attention, since these materials combine the excellent pyroelectric and piezoelectric properties of ceramics with the flexibility, processing facility, and strength of the polymers resulting in relatively high dielectric permittivity and breakdown strength, which are not attainable in a single phase piezoelectric material. The current review article is an attempt to provide a compendium of all the work carried out with reference to PVDF-PZT composites. The review article evaluates the effect of grain size, content and other factors under the purview of dielectric and piezoelectric properties while evaluating the sensitivity of the material for sensor application.
  • No Thumbnail Available
    Item
    Probing the synergism of halloysite nanotubes and electrospinning on crystallinity, polymorphism and piezoelectric performance of poly(vinylidene fluoride)
    (Royal Society of Chemistry, 2016) Khalifa, M.; Mahendran, A.; Anandhan, S.
    Poly(vinylidene fluoride) (PVDF) nanofibers have tremendous potential in nano-sensing and energy scavenging applications. In this study, uniaxially aligned nanofibers were developed from halloysite nanotubes (HNT)/PVDF nanocomposite using electrospinning technique. Incorporation of HNT into PVDF not only reduced the diameter of the electrospun nanofibers, but, also improved their morphology. Fourier transform infrared spectroscopy, wide angle X-ray diffraction and differential scanning calorimetry techniques were used to characterize the crystallinity, polymorphism and polymer-filler interaction in the nanocomposite nanofibers. A force sensor was indigenously designed to study the piezoelectric responses of the nanocomposite nanofibers. At 10 wt% of HNT loading, the sensor produced the highest voltage output, which can be ascribed to its highest ?-phase content. Incorporation of HNT and use of electrospinning synergistically enhanced the ?-phase content and hence the piezoelectric behavior of PVDF. Hence, these nanofibers could be promising and prominent materials in sensor and actuator applications. © The Royal Society of Chemistry.
  • No Thumbnail Available
    Item
    Active damping of multiferroic composite plates using 1-3 piezoelectric composites
    (Institute of Physics Publishing michael.roberts@iop.org, 2017) Kattimani, S.C.
    A layer-wise shear deformation theory is used to analyze the smart damping of multiferroic composite or magneto-electro-elastic (MEE) plates. The intent of this analysis is to investigate the need for incorporating additional smart elements for controlling the vibrations of multiferroic composite plates. Active constrained layer damping (ACLD) treatment has been incorporated to alleviate the vibration of MEE plate. A layer of viscoelastic material is used as constrained layer for the ACLD treatment. The coupled constitutive equations of multiferroic (ferroelectric and ferromagnetic) composite materials along with the total potential energy principle are used to derive the finite element formulation for the overall multiferroic or MEE plate. Maxwell's electrostatic and electromagnetic relations are used to compute the electric and magnetic potential distribution. Influence of obliquely reinforced piezoelectric fibers in the piezoelectric layer of the ACLD treatment has also been investigated. In order to investigate the importance of using ACLD treatment for an active damping of multiferroic or MEE plate, an active control of MEE plate has also been analyzed by providing the control voltage directly to the piezoelectric layers of the MEE substrate plate without using the ACLD treatment. The present study suggests that for an optimal control of MEE plates, the smartness element such as the ACLD treatment is essentially required. © 2017 IOP Publishing Ltd.
  • No Thumbnail Available
    Item
    Vibration control of multiferroic fibrous composite plates using active constrained layer damping
    (Academic Press, 2018) Kattimani, S.; Ray, M.C.
    Geometrically nonlinear vibration control of fiber reinforced magneto-electro-elastic or multiferroic fibrous composite plates using active constrained layer damping treatment has been investigated. The piezoelectric (BaTiO3) fibers are embedded in the magnetostrictive (CoFe2O4) matrix forming magneto-electro-elastic or multiferroic smart composite. A three-dimensional finite element model of such fiber reinforced magneto-electro-elastic plates integrated with the active constrained layer damping patches is developed. Influence of electro-elastic, magneto-elastic and electromagnetic coupled fields on the vibration has been studied. The Golla–Hughes–McTavish method in time domain is employed for modeling a constrained viscoelastic layer of the active constrained layer damping treatment. The von Kármán type nonlinear strain-displacement relations are incorporated for developing a three-dimensional finite element model. Effect of fiber volume fraction, fiber orientation and boundary conditions on the control of geometrically nonlinear vibration of the fiber reinforced magneto-electro-elastic plates is investigated. The performance of the active constrained layer damping treatment due to the variation of piezoelectric fiber orientation angle in the 1–3 Piezoelectric constraining layer of the active constrained layer damping treatment has also been emphasized. © 2018 Elsevier Ltd
  • No Thumbnail Available
    Item
    Synergism of Electrospinning and Nano-alumina Trihydrate on the Polymorphism, Crystallinity and Piezoelectric Performance of PVDF Nanofibers
    (Minerals, Metals and Materials Society 184 Thorn Hill Road Warrendale PA 15086, 2018) Khalifa, M.; Deeksha, B.; Mahendran, A.; Anandhan, S.
    Poly(vinlylidene fluoride) (PVDF) is known for its electroactive phases, which can be nucleated by incorporating nanoparticles into PVDF to enhance its piezoelectric performance. In this study, the synergistic effect of electrospinning and nano alumina trihydrate (ATH) filler was used to enhance the electroactive ? phase of PVDF. Electrospun nanofibers of PVDF/ATH nanocomposite (PANCF) were synthesized with different loadings of ATH. The presence of ATH enhances the surface charges of the electrospun droplets, leading to thinner fibers. The highest ?-phase content was found to be 70.1% for PANCF with 10% ATH. The piezoelectric performance of the nanofiber mats was studied using an indigenous setup. The highest voltage output of 840 mV was produced by PANCF with 10% ATH. These nanofibers could be a promising material in the field of sensors, actuators and energy-harvesting applications. © 2018, The Minerals, Metals & Materials Society.
  • No Thumbnail Available
    Item
    Design, fabrication and testing of a 2 DOF compliant flexural microgripper
    (Springer Verlag service@springer.de, 2018) Dsouza, R.D.; Karanth P, K.P.; Theodoridis, T.; Sharma, P.
    This paper presents the development of a monolithic two degrees of freedom (2 DOF), piezoelectric actuated microgripper for the manipulation of micro-objects. Micromanipulation and microassembly are the major subjects of interest in recent times and are becoming increasingly important in many domains. An effort is being made to develop a novel 2 DOF microgripper, each jaw being able to move independently to grasp and rotate objects of micro sizes. Microgripper is developed based on the compliant mechanism. The designed 2 DOF compliant microgripper is modeled using FEM and PRBM approach further validated experimentally. The microgripper is actuated using APA 120-S piezoelectric stack actuators. The displacement of the microgripper and the gripping force is measured by image processing technique using LabVIEW tools. The microgripper is subjected to various tests to measure the displacement amplification ratio and micromanipulation experiments. Wire of various sizes are used to test the grasping and rotating sequence of the microgripper. The theoretical, simulation and experimental results reveal the good performance of the microgripper. © 2018, Springer-Verlag GmbH Germany, part of Springer Nature.
  • No Thumbnail Available
    Item
    Synergism of graphitic-carbon nitride and electrospinning on the physico-chemical characteristics and piezoelectric properties of flexible poly(vinylidene fluoride) based nanogenerator
    (Springer Netherlands rbk@louisiana.edu, 2019) Khalifa, M.; Mahendran, A.; Anandhan, S.
    Herein, we investigated the piezoelectric performance of electrospun poly(vinylidene fluoride)/graphitic carbon nitride (PVDF/g-C 3 N 4 ) nanocomposite fibers (PGN-X). Addition of g-C 3 N 4 nanosheets improved the spinnability of nanofibers and augmented the ?-phase content of PVDF. The synthesized PGN non-woven mats were flexible and easily deformable without disrupting the continuity of fibers. Upon the addition of g-C 3 N 4 , tensile strength and thermal stability of nanocomposite fibers improved significantly. A maximum voltage output of ~7.5 V was generated for PGN nanogenerator which is ~8 times more than that of PVDF nanogenerator. Also, the PGN-X nanogenerator generated current output of 0.23 ?A and a power density of 0.22 ?W/cm ?2 . Improved physico-chemical characteristics and piezoelectric performance of PGN nanogeneratoris promising and makes it suitable for portable electronic and wearable devices. © 2019, The Polymer Society, Taipei.
  • No Thumbnail Available
    Item
    Durable, efficient, and flexible piezoelectric nanogenerator from electrospun PANi/HNT/PVDF blend nanocomposite
    (John Wiley and Sons Inc. cs-journals@wiley.com, 2019) Khalifa, M.; Mahendran, A.; Anandhan, S.
    Currently, there is considerable research focus on portable, lightweight, shock-resistant, and inexpensive wearable devices that are ideally powered by harvesting abundant mechanical or vibration energy, making battery or related wiring superfluous. In this study, piezoelectric nanogenerator was electrospun from PANi (polyaniline)/HNT (halloysite nanotube)/PVDF (poly[vinylidene fluoride]) blend nanocomposite. Polymorphism, crystallinity and morphology of the nanogenerator were explored in detail. HNT and PANi acted as a nucleating agent and conductive filler, respectively in PVDF; their synergism helps improve the piezoelectric performance of PVDF. The piezoelectric performance of the nanogenerator patch was studied under various external mechanical stresses, such as pressure, tapping, and impact. A maximum voltage output of approximately 7.2 V was generated by the nanogenerator under impact. The nanogenerator patch attached to human arm exhibited not only excellent piezoelectric response during arm movements, but, also proved to be flexible, highly sensitive and durable. This nanogenerator could possibly be used in wearable piezoelectric energy conversion application for self-powered devices. POLYM. COMPOS., 40:1663–1675, 2019. © 2018 Society of Plastics Engineers. © 2018 Society of Plastics Engineers