Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
18 results
Search Results
Item Static studies of stepped functionally graded magneto-electro-elastic beam subjected to different thermal loads(Elsevier Ltd, 2017) Mahesh, M.; Kattimani, S.C.In this article, a three dimensional finite element (FE) formulation for a multilayered magneto-electro-elastic (MEE) beam in thermal environment is presented. The equilibrium equations of the system are attained using the principle of total potential energy and linear coupled constitutive equations of MEE material. The corresponding FE equations are derived and the numerical evaluation of stepped functionally graded (SFG) MEE beam is carried out. The influence of various in-plane and through thickness temperature distributions on the direct quantities (displacements and potentials) and derived quantities (stresses, electric displacement and magnetic flux density), across the thickness of SFG-MEE cantilever beam is analyzed. In addition, an attempt has been made to investigate the effect of stacking sequence, thermo-magnetic and thermo-electric coupling on the direct quantities of the SFG-MEE beam. Further, a comparative study is made to evaluate the variations of displacements, potentials, electric displacements, magnetic flux density and stresses at different regions of the beam. It is expected that the results presented in this article may be useful in the design and analysis of MEE smart structures and sensor applications. © 2016 Elsevier LtdItem Geometrically nonlinear vibration analysis of multiferroic composite plates and shells(Elsevier Ltd, 2017) Kattimani, S.C.In this article, a layerwise shear deformation theory is incorporated for geometrically nonlinear vibration (GNV) analysis of multiferroic composite plates and doubly curved shells. The coupled constitutive equations involving ferroelastic, ferroelectric and ferromagnetic properties of multiferroic composite materials along with the total potential energy principle are utilized to derive the finite element formulation for the multiferroic or magneto-electro-elastic (MEE) plates/shells. The electric and the magnetic potentials are assumed to vary linearly in the transverse direction. The electric and magnetic potential distribution in the plate/shell is computed by using the Maxwell's electromagnetic relations. The significance of geometric nonlinearity has been considered using the von Kármán nonlinear strain-displacement relations. Importance of curvature aspect ratio, curvature ratio and the thickness aspect ratio on the nonlinear frequency ratios of the multiferroic/MEE doubly curved shells has been investigated. The backbone curves for multiferroic plates and shells have been studied by considering various aspect ratios. Impact of layer stacking sequence, boundary conditions and coupled fields on the central deflection and nonlinear frequency ratio of the multiferroic plates and shells have been investigated. © 2016 Elsevier LtdItem A finite element based assessment of static behavior of multiphase magneto-electro-elastic beams under different thermal loading(Techno-Press, 2017) Mahesh, M.; Kattimani, S.C.In this article, static analysis of a magneto-electro-elastic (MEE) beam subjected to various thermal loading and boundary conditions has been investigated. Influence of pyroeffects (pyroelectric and pyromagnetic) on the direct quantities (displacements and the potentials) of the MEE beam under different boundary conditions is studied. The finite element (FE) formulation of the MEE beam is developed using the total potential energy principle and the constitutive equations of the MEE material taking into account the coupling between elastic, electric, magnetic and thermal properties. Using the Maxwell electrostatic and electromagnetic relations, variation of stresses, displacements, electric and magnetic potentials along the length of the MEE beam are investigated. Effect of volume fractions, aspect ratio and boundary conditions on the direct quantities in thermal environment has been determined. The present investigation may be useful in design and analysis of magnetoelectroelastic smart structures and sensor applications. © 2017 Techno-Press, Ltd.Item Static behavior of thermally loaded multilayered Magneto-Electro-Elastic beam(Techno-Press, 2017) Mahesh, M.; Kattimani, S.C.The present article examines the static response of multilayered magneto-electro-elastic (MEE) beam in thermal environment through finite element (FE) methods. On the basis of the minimum total potential energy principle and the coupled constitutive equations of MEE material, the FE equilibrium equations of cantilever MEE beam is derived. Maxwell's equations are considered to establish the relation between electric field and electric potential; magnetic field and magnetic potential. A simple condensation approach is employed to solve the global FE equilibrium equations. Further, numerical evaluations are made to examine the influence of different in-plane and through-thickness temperature distributions on the multiphysics response of MEE beam. A parametric study is performed to evaluate the effect of stacking sequence and different temperature profiles on the direct and derived quantities of MEE beam. It is believed that the results presented in this article serve as a benchmark for accurate design and analysis of the MEE smart structures in thermal applications. © Copyright 2017 Techno-Press, Ltd.Item Static analysis of stepped functionally graded magneto-electro-elastic plates in thermal environment: A finite element study(Elsevier Ltd, 2017) Mahesh, M.; Kattimani, S.C.In this article, a finite element (FE) formulation accounting for multiphysics response of multilayered magneto-electro-elastic (MEE) plates in the thermal environment has been presented. The equilibrium equations of motion are attained using the principle of total potential energy and coupled constitutive relations of MEE material. Maxwell's equation of electrostatics and magnetostatics are used to model the electric and magnetic behavior. The influence of various through thickness temperature distributions on the static parameters of stepped functionally graded magneto-electro-elastic (SFG-MEE) plates is investigated. Further, an extra attention has been devoted to evaluate the effect of product properties (pyroelectric and pyromagnetic coupling), boundary conditions and aspect ratio on the direct (displacements, electric potential and magnetic potential) and derived quantities (stresses, electric displacement, and magnetic flux density) of the SFG-MEE plate. A comparative study is also carried out to analyse the effect of stacking sequence, boundary conditions, pyroeffects, length-to-width ratio and aspect ratios of the SFG-MEE plate. The credibility of the proposed FE model is verified with the results available in the literature. It is expected that the findings in this article may be useful for accurate design and analysis of MEE structures under the thermal environment. © 2017 Elsevier LtdItem Hygrothermal analysis of magneto-electro-elastic plate using 3D finite element analysis(Elsevier Ltd, 2017) Mahesh, M.; Kattimani, S.C.In this article, the static response of magneto-electro-elastic (MEE) plate subjected to hygrothermal loads is investigated using the finite element (FE) method. A FE formulation is derived using the principle of total potential energy and linear coupled constitutive equations of MEE materials by taking into account the thermal and hygroscopic field effects. A uniform temperature rise and moisture concentration rise has been considered. The variations of static parameters are estimated along the MEE plate length by considering the temperature and moisture dependant elastic stiffness coefficients. The coupled FE equilibrium equations in terms of displacements, electric and magnetic potentials are solved directly using condensation procedure. Numerical examples of the FE results are presented and discussed in detail to understand the significant effects of hygrothermal loading, temperature and moisture dependent material properties, boundary conditions and aspect ratio on the direct (displacements, electric potential and magnetic potential) and derived quantities (stresses, electric displacement and magnetic flux density) of MEE plate. © 2017 Elsevier LtdItem Active damping of multiferroic composite plates using 1-3 piezoelectric composites(Institute of Physics Publishing michael.roberts@iop.org, 2017) Kattimani, S.C.A layer-wise shear deformation theory is used to analyze the smart damping of multiferroic composite or magneto-electro-elastic (MEE) plates. The intent of this analysis is to investigate the need for incorporating additional smart elements for controlling the vibrations of multiferroic composite plates. Active constrained layer damping (ACLD) treatment has been incorporated to alleviate the vibration of MEE plate. A layer of viscoelastic material is used as constrained layer for the ACLD treatment. The coupled constitutive equations of multiferroic (ferroelectric and ferromagnetic) composite materials along with the total potential energy principle are used to derive the finite element formulation for the overall multiferroic or MEE plate. Maxwell's electrostatic and electromagnetic relations are used to compute the electric and magnetic potential distribution. Influence of obliquely reinforced piezoelectric fibers in the piezoelectric layer of the ACLD treatment has also been investigated. In order to investigate the importance of using ACLD treatment for an active damping of multiferroic or MEE plate, an active control of MEE plate has also been analyzed by providing the control voltage directly to the piezoelectric layers of the MEE substrate plate without using the ACLD treatment. The present study suggests that for an optimal control of MEE plates, the smartness element such as the ACLD treatment is essentially required. © 2017 IOP Publishing Ltd.Item Influence of coupled fields on free vibration and static behavior of functionally graded magneto-electro-thermo-elastic plate(SAGE Publications Ltd info@sagepub.co.uk, 2018) Mahesh, M.; Sagar, P.J.; Kattimani, S.In this article, the influence of full coupling between thermal, elastic, magnetic, and electric fields on the natural frequency of functionally graded magneto-electro-thermo-elastic plates has been investigated using finite element methods. The contribution of overall coupling effect as well as individual elastic, piezoelectric, piezomagnetic, and thermal phases toward the stiffness of magneto-electro-thermo-elastic plates is evaluated. A finite element formulation is derived using Hamilton’s principle and coupled constitutive equations of magneto-electro-thermo-elastic material. Based on the first-order shear deformation theory, kinematics relations are established and the corresponding finite element model is developed. Furthermore, the static studies of magneto-electro-elastic plate have been carried out by reducing the fully coupled finite element formulation to partially coupled state. Particular attention has been paid to investigate the influence of thermal fields, electric fields, and magnetic fields on the behavior of magneto-electro-elastic plate. In addition, the effect of pyrocoupling on the magneto-electro-elastic plate has also been studied. Furthermore, the effect of geometrical parameters such as aspect ratio, length-to-thickness ratio, stacking sequence, and boundary conditions is studied in detail. The investigation may contribute significantly in enhancing the performance and applicability of functionally graded magneto-electro-thermo-elastic structures in the field of sensors and actuators. © 2017, © The Author(s) 2017.Item Free vibration and static analysis of functionally graded skew magneto-electro-elastic plate(Techno-Press, 2018) Kiran, M.C.; Kattimani, S.This article presents a finite element (FE) model to assess the free vibration and static response of a functionally graded skew magneto-electro-elastic (FGSMEE) plate. Through the thickness material grading of FGSMEE plate is achieved using power law distribution. The coupled constitutive equations along with the total potential energy approach are used to develop the FE model of FGSMEE plate. The transformation matrix is utilized in bringing out the element matrix corresponding to the global axis to a local axis along the skew edges to specify proper boundary conditions. The effect of skew angle on the natural frequency of an FGSMEE plate is analysed. Further, the study includes the evaluation of the static behavior of FGSMEEplate for various skew angles.The influence of skew angle on the primary quantities such as displacements, electric potential, and magnetic potential, and secondary quantities such as stresses, electric displacement and magnetic induction is studied indetail. In addition, the effect of power-law gradient, thickness ratio, boundary conditions and aspect ratio on the free vibration and static response characteristics of FGSMEE plate has been investigated. © 2018 Techno-Press, Ltd.Item Porosity influence on structural behaviour of skew functionally graded magneto-electro-elastic plate(Elsevier Ltd, 2018) Kiran, M.C.; Kattimani, S.; Mahesh, M.This article presents a finite element (FE) formulation to assess the influence of porosity on the static responses and free vibration of functionally graded skew magneto-electro-elastic (FGSMEE) plate. The porosity is accounted for local density using modified power law. The skew edges of the plate are achieved by implementing transformation matrix. The coupled constitutive relations establish the different couplings associated with MEE materials. The displacements, potentials, and stresses for the porous skew plate are established through static analysis. The influence of porosity on the natural frequency of the skew plate is investigated via free vibration analysis. The influence of different porosity distributions on various skew angles of the FGSMEE plate has been studied. The effect of porosity volume, skew angle, and geometrical parameters such as aspect ratio, thickness ratio, and boundary conditions on the porous FGSMEE plate is investigated. © 2018 Elsevier Ltd