Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
11 results
Search Results
Item Various trade-off scenarios in thermo-hydrodynamic performance of metal foams due to variations in their thickness and structural conditions(MDPI, 2021) Trilok, G.; Gnanasekaran, N.; Mobedi, M.The long standing issue of increased heat transfer, always accompanied by increased pressure drop using metal foams, is addressed in the present work. Heat transfer and pressure drop, both of various magnitudes, can be observed in respect to various flow and heat transfer influencing aspects of considered metal foams. In this regard, for the first time, orderly varying pore density (characterized by visible pores per inch, i.e., PPI) and porosity (characterized by ratio of void volume to total volume) along with varied thickness are considered to comprehensively analyze variation in the trade-off scenario between flow resistance minimization and heat transfer augmentation behavior of metal foams with the help of numerical simulations and TOPSIS (Technique for Order of Preference by Similarity to Ideal Solution) which is a multi-criteria decision-making tool to address the considered multi-objective problem. A numerical domain of vertical channel is modelled with zone of metal foam porous media at the channel center by invoking LTNE and Darcy–Forchheimer models. Metal foams of four thickness ratios are considered (1, 0.75, 0.5 and 0.25), along with varied pore density (5, 10, 15, 20 and 25 PPI), each at various porosity conditions of 0.8, 0.85, 0.9 and 0.95 porosity. Numerically obtained pressure and temperature field data are critically analyzed for various trade-off scenarios exhibited under the abovementioned variable conditions. A type of metal foam based on its morphological (pore density and porosity) and configurational (thickness) aspects, which can participate in a desired trade-off scenario between flow resistance and heat transfer, is illustrated. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.Item Hydrodynamic Performance of Fixed Floating Structures Coupled with Submerged Breakwaters Using the Multidomain Boundary Element Method(American Society of Civil Engineers (ASCE), 2023) Patil, S.B.; Karmakar, D.The hydrodynamic characteristics of fixed floating structure (FFSs) of various configurations, such as rectangular fixed floating structures and trapezoidal fixed floating structures coupled with submerged breakwaters of two different shapes, namely, rectangular breakwater and trapezoidal breakwater, are investigated using the multidomain boundary element method under the framework of small-amplitude wave theory. The hydrodynamic analysis of the FFS with and without the presence of submerged breakwater is performed for the variation in physical parameters such as a change in structural parameters of the submerged breakwater (shape, relative submergence depth, relative crest width, and structural porosity), structural parameters of FFS (shape and structural width), wave parameter (angle of incidence), and relative spacing between the FFS and submerged breakwater. The study demonstrates, for a given range of incident wave angles, periodic values of the distance between the submerged breakwater and the FFS and optimal shape combinations for which the coupled structures act effectively in attenuating wave force acting on the FFS and optimizing wave transformations. In addition, to enhance the hydrodynamic performance, the presence of reef structures in front of the FFS is associated, which results in Bragg's resonance with a phase shift in peaks of wave reflection and transmission coefficient caused by changing the structural porosity of the submerged breakwater, indicating that the proposed models are more flexible, allowing demand-based control over shore dynamics and coastal management. The study will be useful for coastal management and safeguarding floating structures by selecting various forms and combinations of coupled FFSs with submerged porous breakwaters. © 2023 American Society of Civil Engineers.Item Performance of a hybrid TLP floating wind turbine combined with arrays of heaving point absorbers(Elsevier Ltd, 2023) Rony, J.S.; Karmakar, D.In the present study, the hydrodynamic performance of circular and concentric arrangements of cone-cylinder-type heaving point absorbers around a Submerged Tension-Leg Platform (STLP) is analysed using the numerical model in the frequency domain based on the potential flow theory. The presence of the Wave Energy Converters (WECs) around the STLP floating wind turbine platform affects the hydrodynamic performance of the hybrid floating platform. So to illustrate the effects of WECs on the platform, the ratio of hydrodynamic coefficients for a single WEC system to that for a hybrid system is analysed. An array of heaving point absorbers is placed in circular and concentric patterns to understand the performance of heaving point absorbers in the absorption of wave energy. The cone-cylinder type heaving point absorber is selected for the present study as they yield more power as compared to other shaped point absorbers. The study compares the wave power absorption of each point absorber around the platform for irregular wave conditions of the North Sea. The effect of incoming waves is illustrated by analysing four different wave heading angles. To quantify the performance of the WECs in an array, the q-factor and coefficient of variation are studied for each array at different sea states. The study suggested the best possible arrangement pattern for wave power absorption and power uniformity among the floaters in the array. The study performed will be helpful in the design and analysis of the possible arrangement of point absorbers around the floating wind turbine platform for wave power absorption. © 2023 Elsevier LtdItem Numerical investigation of Edinburgh Duck wave energy converter integrated with floating breakwaters(Springer Nature, 2023) Vidyabhushan, R.R.; Karmakar, D.Hydrodynamic performance of hybrid floating structures consisting of Edinburgh Duck Wave Energy Converter (ED-WEC) integrated to different shapes of Floating Breakwaters (FBW) namely (i) box-type FBW, (ii) trapezoidal-type FBW, (iii) π -type FBW, (iv) parabolic-type FBW and (v) semi-circular-type FBW are investigated based on small amplitude wave theory. The study is performed on the harvesting of wave energy and increasing the wave power absorption from the scattered and the reflected waves due to the presence of oceanic structures integrated with WEC. The hydrodynamic analysis for the hybrid floating breakwater-WEC system is analysed using Ansys AQWA. The associated diffractions and motions of the hybrid floating breakwater-WEC system are examined. The motion responses and resulting wave forces for the heave motion of ED-WEC with different parameters such as width of ED, draft of ED, distance between ED-WEC and floating breakwater and angle of incident are investigated. Further, the study is carried out for isolated ED-WEC and isolated breakwaters. The study performed will help in developing an efficient and reliable form of device for harnessing maximum wave energy into electricity along with the breakwater having practical application of ED-WEC at the initial stages of design. The study will provide a potential solution of generating power from the wave energy and as a coastal defence structure with the presence of floating breakwaters. © 2023, The Author(s), under exclusive licence to Sociedade Brasileira de Engenharia Naval.Item Hydrodynamic performance of wave energy converter integrated with pile restrained floating structure near a partially reflecting seawall(Elsevier Ltd, 2023) Patil, S.B.; Karmakar, D.The integration of a Wave Energy Converter (WEC) with a Pile-Restrained Rectangular Floating Breakwater (PRFB) in the presence of a partially reflecting vertical seawall is analysed to enhance the hydrodynamic performance and WEC efficiency of the integrated breakwater-WEC device based on small amplitude wave theory using the Boundary Element Method (BEM). The rectangular floating breakwater is designed to have heave motion with a pile-restrained floating structure placed in a position to attenuate the incoming wave in the transmitted region and the linear power take-off (PTO) damping is employed to calculate the absorbed power. The study is performed to understand the effectiveness of wave energy conversion and its hydrodynamic performance due to changes in the seawall's porosity, relative structural width, relative structural draft, wave energy conversion power take-off damping coefficients, and the relative gap of the WEC integrated with PRFB from the seawall. The study demonstrated that in the presence of a fully reflecting seawall, the wave energy extraction is enhanced for the integrated WEC system without compromising the defined threshold wave reflection coefficient but at the expense of a constrained range of wavenumbers that correspond near the system's fundamental natural frequency. Moreover, the capture width ratio is noted to be higher for relatively smaller structural drafts, while the wave reflection coefficient shows precisely the reverse trend. However, under such circumstances, the integrated WEC system operates as a motion-trapping structure, especially when the reflection coefficient of the seawall, CR≥0.75. Thus, the present study will assist the designer in determining the appropriate degrees of efficiency of the WEC device without sacrificing hydrodynamic performance by fine-tuning the hybrid floating breakwater system's geometrical parameters. © 2023 Elsevier LtdItem Hydrodynamic performance of pile restrained U-shaped OWC device using boundary element method(Elsevier Ltd, 2024) Muduli, R.; Patil, S.B.; Karmakar, D.The hydrodynamic performance of a pile-restrained U-shaped Oscillating Water Column (U-OWC) device under the action of normal incident waves is analysed using the Boundary Element Method (BEM). The hydrodynamic parameters, such as the radiation susceptance and conductance coefficients and hydrodynamic efficiency, are analysed for various cases of different structural parameters of U-OWC. It is observed that the theoretical maximum efficiency can be achieved for a wide range of wavenumbers by appropriate tweaking and optimisation of the device geometry. The resonance enables the device to reach the maximum possible efficiency and the phenomenon of obtaining the maximum efficiency of the final optimised geometry is achieved. The shorter length of draft of the device is chosen over longer draft considering the high construction cost as well as efficiency enhancement of the device, even though the longer draft is observed to perform marginally better in a narrow wave number range. The numerical investigation of the theoretical maximum efficiency is observed to be 100% whenever the μ (dimensionless radiation susceptance coefficient) crosses the zero mark. Consequently, the maximum theoretical efficiency is observed close to maximum whenever μ is close to zero. The final optimised geometry consisting of an inward inclined top wall configuration performs best but could be challenging in actual construction. Further, on inclining the bottom wall in the inwards or outward direction does not result in better performance than inclining only the top wall. The present study explores a novel concept of pile-restrained U-OWC kept near the surface and will be helpful in determining the best-performing geometry for the device. © 2023 Elsevier LtdItem Hydrodynamic performance of an oscillating water column WEC integrated with a pile-restrained H-type breakwater(Taylor and Francis Ltd., 2025) Vishwakarma, R.D.; Muduli, R.; Karmakar, D.The present study examines the hydrodynamic performance of an oscillating water column (OWC) wave energy converter (WEC) integrated into a pile restrained H-type breakwater. A three-dimensional model study is performed using ANSYS-AQWA based on potential flow theory. The results for the incident wave excitation force, shear force, and bending moment on the pile restrained breakwater and the transmission coefficient are obtained for the regular waves. The effect of incident wave angle on the forces is assessed along with the impact of changes in relative draft and width of the device. The power capture efficiency as well as wave transformation characteristics of the device are evaluated using Boundary Element Method (BEM). The study performed will be helpful to scientists and researchers to design and develop an integrated hybrid breakwater system that can protect the coast and provide useful energy by minimising the impact on the marine ecological system and environment. © 2025 Informa UK Limited, trading as Taylor & Francis Group.Item Hydrodynamic performance of hybrid floating breakwater integrated with oscillating water column(SAGE Publications Ltd, 2025) Vishwakarma, R.D.; Karmakar, D.The present study investigates the hydrodynamic performance of different types of hybrid floating breakwaters (HFB) integrated with an oscillating water column (OWC). The study is performed for five different cross-sectional shapes of HFB, such as rectangular, box, H, ?, and trapezoidal, with the inclusion of OWC of the same dimension in all of the hybrid floating breakwaters. The performance of the HFBs is examined for its motion response, wave transmission coefficient, and power capture under the action of the regular waves, considering the incident wave normal to the structure. The motion response and wave transmission characteristics assessment are based on potential flow theory, and the power capture due to the HFB is assessed using the volume of fluid (VOF) flow computation method. The HFB model performing better in terms of transmission coefficient and power capture considering wider bandwidth for the considered surface gravity wave frequencies is selected to investigate the effect of changes in HFB’s parameters, such as length, width, draft, and wave incident angle on the hydrodynamic performance. Additionally, the streamline contours for the air flow velocity variation through the OWC chamber in different types of hybrid floating structures are analysed for better understanding of flow through visualisation. The aforementioned streamline contour is determined for the wave frequency where the maximum wave energy capture in the HFB models is observed. The study will facilitate the researchers to comprehensively investigate the stability of hybrid floating breakwater under the influence of regular waves with the help of the findings of the present investigation. © IMechE 2025Item Hydrodynamic analysis of arrays of integrated U-shaped OWC device and ?-breakwater(Elsevier Ltd, 2025) Muduli, R.; Karmakar, D.The hydrodynamic performance of arrays of hybrid floating breakwater consisting of pile-restrained U-shaped Oscillating Water Column (U-OWC) integrated with ?-breakwater is analysed using Boundary Element Method (BEM). The study is performed to analyse the theoretical maximum efficiency, reflection and transmission coefficients and horizontal wave force coefficient on the top wall of the U-OWC integrated with breakwater as a function of the incidence angle as well as the non-dimensional spacing between the devices. The geometrical variations of the U-OWC relative chamber width and draft are considered to study the effect on the hydrodynamic performance. The study reveals that on increasing the relative draft of the U-OWC, the energy conversion efficiency is improved whereas the increase in the relative chamber width beyond 0.5 times the water depth (A2/h=0.5) was detrimental to the efficiency. Further, the wave reflection coefficient as a function of incidence angle is noted to be unaffected by geometric variations of the U-OWC. The wave force coefficients as a function of the non-dimensional spacing is observed to exhibit a sinusoidal pattern for the wave interaction with array of integrated U-OWC with breakwater. The numerical investigation on the array of integrated devices will enhance the knowledge and determine the performance of the array of integrated device. © 2025 Elsevier LtdItem Hydrodynamic performance of a hybrid floating breakwater-wave energy conversion system(SAGE Publications Ltd, 2025) Patil, S.B.; Karmakar, D.The study presents the hydrodynamic performance and wave energy conversion of a hybrid floating breakwater under the framework of small amplitude linear wave theory. The hybrid floating breakwater is composed of a partially liquid-filled rectangular-box type tank with built-in buoys connected to a Power Take-Off (PTO) (linear inductance generator) and is excited under regular wave conditions for (a) constrained roll motion, and (b) constrained surge, heave, and roll motion. The Boundary Element Method (BEM) is employed with the assumption of modest sloshing in the tank of the hybrid floating breakwater to estimate the hydrodynamic efficiency of the hybrid floating breakwater. Further, the experimental investigation on the Wave Energy Converter (WEC) capabilities and the hydrodynamic coefficients (wave reflection and transmission coefficients) are estimated for the excitation frequencies corresponding to nondimensional wavenumber. The present study reveals that the hybrid concept improves wave attenuation performance by 20%–35% compared to conventional floating breakwaters by increasing wave attenuation, damping and stabilizing the wave transmission coefficient (Formula presented) within (Formula presented). The experimental investigation shows that hybrid floating breakwater attaints its floating stability for the depth 15 – 25% of partially filled fluid for which the proposed design as floating breakwater as well as WEC system is achieved for a wide range of excitation frequencies. Furthermore, the hybrid floating breakwater functions as a barrier which is noted to be capable of significantly attenuating incoming progressive waves below the predetermined threshold values of wave attenuation characteristics, in addition to converting wave energy. © IMechE 2025. This article is distributed under the terms of the Creative Commons Attribution 4.0 License (https://creativecommons.org/licenses/by/4.0/) which permits any use, reproduction and distribution of the work without further permission provided the original work is attributed as specified on the SAGE and Open Access page (https://us.sagepub.com/en-us/nam/open-access-at-sage).