Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
73 results
Search Results
Item Effect of lamination schemes on natural frequency and modal damping of fiber reinforced laminated beam using Ritz method(EDP Sciences, 2021) Somi Naidu, S.N.; Jeyaraj, J.; Mailan Chinnapandi, L.B.; Reddi, C.V.S.N.The current study focussed on analysing natural frequency and damping of laminated composite beams (LCBs) by varying fiber angle, aspect ratio, material property and boundary conditions. Ritz method with displacement field based on the shear and normal deformable theory is used and the modal damping is calculated using modal strain energy method. Effects of symmetric angle-ply and cross-ply, anti symmetric cross-ply, balanced and quasi-isotropic lay up schemes on modal damping are presented for the first time. Results revealed that influence of lay-up scheme on natural frequencies is significant for the thin beams while the modal damping of the thin beams are not sensitive to lay-up scheme. However, the lay-up scheme influences the damping significantly for the thick beams. Similarly, high strength fiber reinforced LCBs have higher natural frequency while low strength fiber reinforced LCBs have higher damping due to the better fiber-matrix interaction. © S.N. Balireddy et al., Published by EDP Sciences, 2021.Item A Review of Superconducting Magnetic Bearings and Their Application(Institute of Electrical and Electronics Engineers Inc., 2022) Supreeth, D.K.; Bekinal, S.I.; Shivamurthy, S.R.; Doddamani, M.Magnetic bearings are being researched for high-speed applications, such as flywheel energy storage devices, to eliminate friction losses. As per Earnshaw's theorem, stable levitation cannot be achieved for a static passive magnetic bearing system. Fully passive stable levitation can be achieved with the help of superconducting magnetic bearings (SMB). This article provides an in-depth review of the modeling, analysis, and development of SMB. The different SMB configurations are highlighted, together with essential methodologies for estimating and improving their performance. The advancements in mathematical models used and the optimization of bearing characteristics are thoroughly discussed. Further, key developments in the application of SMB in flywheel energy storage systems are also reviewed. © 2002-2011 IEEE.Item Statistical modeling of a magneto-rheological fluid damper using the design of experiments approach(2007) Shivaram, A.C.; Gangadharan, K.V.In this work, a through-rod-type magneto-rheological (MR) test damper has been designed and fabricated for experimental study. Various factors, such as the magnetic field strength, volume fraction of particles in the MR fluid, shearing gap between piston and cylinder, vibration frequency and amplitude, have been considered as input factors, and the root-mean-square (RMS) damping force as the output factor (response variable). These input factors are varied in two levels (low and high) during the initial phase of experimentation using 25 factorial design; the motivation is to identify the most influential factors. In the second phase of experimentation, the response surface method has been used to identify the modeling equation and to plot the response surfaces. Further, force versus displacement diagrams have been plotted at these factor levels; these give an insight into the damping behaviour of the MR damper. © IOP Publishing Ltd.Item Response of fly ash-reinforced functionally graded rubber composites subjected to mechanical loading(2012) Doddamani, M.R.; Kulkarni, S.M.A novel approach to estimate the Young's modulus of a functionally graded rubber composite (FGRC) from the damping ratio is demonstrated with the examples of unreinforced and fly ash-reinforced materials. FGRC coupons were prepared using the conventional casting technique. The occurrence of gradation in the specimens was attributed to the variable density of particles present in the fly ash, settling at different depths. The technique of free vibrations was used for experimentation. The damping response of the FGRC specimens was studied. The results obtained from the experiments showed that, with growing filler weight fraction, the Young's modulus of the composite increased. The empirical model developed to predict the magnitude of the modulus turned out to be in good agreement with experimental data. © 2012 Springer Science+Business Media, Inc.Item Performance of synchronous machine models in a series-capacitor compensated system(Institute of Electrical and Electronics Engineers Inc., 2014) Kotian, S.M.; Shubhanga, K.N.This paper compares the IEEE-specified generator models such as the equivalent circuit (EC) models and the operational inductance (OI) models to understand their damping performances in the IEEE first-benchmark system for subsynchronous resonance study. These models are found to differ from one another only to an extent they accurately represent the standard transfer functions. By carrying out different case studies an effort is made to analyze the influence of these differences among the models on the damping performance of swing-mode and torsional modes. Through a detailed eigenvalue analysis and time-domain simulations, it is demonstrated that these models offer differing results with respect to swing-mode, thereby strongly influencing the power system stabilizer (PSS) performances, especially when the system is series compensated. Even the torsional mode interactions are found to exhibit dependency on the models employed for the generators. Such a study is expected to provide better insight into the behavior of generator models and controller design/tuning in system analysis. © 1969-2012 IEEE.Item Tensile, impact, and vibration properties of coconut sheath/sisal hybrid composites: Effect of stacking sequence(SAGE Publications Ltd, 2014) Krishnasamy, K.S.; Siva, I.; Nagarajan, N.; Jeyaraj, P.; Winowlin Jappes, J.W.This work addresses the tensile, impact, and free vibration properties of sisal/coconut sheath fiber hybrid-reinforced unsaturated polyester composites. The hybrid composites are fabricated using a compression molding technique with varying stacking sequences under as-received or chemically treated conditions. The chemical treatments (alkali and tri-chloro vinyl silane) have shown better performance than untreated composites. Furthermore, the silane-treated composite shows enhanced static mechanical and free vibration properties for all stacking sequences relative to the other two cases. From the experimental results, the silane-treated coconut sheath/sisal/coconut sheath hybrid stack is found to be an optimum stacking sequence for better properties. Further, an encouraging damping factor value is also observed for the optimum stacking sequence. The failure mechanism of interfacial de-bonding between the fibers and the matrix is analyzed with the aid of scanning electron microscopy. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.Item Influence of redmud on the mechanical, damping and chemical resistance properties of banana/polyester hybrid composites(Elsevier Ltd, 2014) Veerasimman, V.; Marimuthu, M.; Manikandan, V.; Nagarajan, N.; Jeyaraj, P.A novel hybrid composite was developed with the addition of redmud as secondary reinforcing filler with banana fiber reinforced polyester composites (BFRPCs). The effect of varying parameters such as particle size (4, 6 and 13. ?m) and weight percentage (2, 4, 6, 8 and 10. wt%) of redmud were analyzed on static mechanical, free vibration and chemical resistance properties of hybrid composites. The addition of redmud shown enhanced performance compared to the virgin BFRPCs in all the above said properties. The maximum increase of 50% in mechanical strength was observed for the BFRPCs with the addition of redmud having 4. ?m particle size and 8. wt% of filler content compared to pure BFRPCs. The increased value of fundamental natural frequencies with associated modal damping characteristics of redmud filled BFRPCs were found using half-power band width method. All the fabricated composites performed well against various chemicals and it indicates that the resistance to the weight loss is due to the uniformly distributed redmud. To study the effect of redmud on interfacial bonding between the banana fiber and polyester matrix the Scanning Electron Microscope (SEM) image analysis was performed. © 2014 Elsevier Ltd.Item A novel approach to investigate effect of magnetic field on dynamic properties of natural rubber based isotropic thick magnetorheological elastomers in shear mode(Central South University of Technology f-ysxb@mail.csut.edu.cn, 2015) Hegde, S.; Kiran, K.; Gangadharan, K.V.The preparation of natural rubber based isotropic thick magnetorheological elastomers (MRE) was focused on by varying the percentage volume concentration of carbonyl iron powder and developing a test set up to test the dynamic properties. Effect of magnetic field on the damping ratio was studied on the amplification region of the transmissibility curve. The viscoelastic dynamic damping nature of the elastomer was also studied by analyzing the force-displacement hysteresis graphs. The results show that MR effect increases with the increase in magnetic field as well as carbonyl iron powder particle concentration. It is observed that softer matrix material produces more MR effect. A maximum of 125% improvement in the loss factor is observed for the MRE with 25% carbonyl iron volume concentration. FEMM simulation shows that as carbonyl iron particle distribution becomes denser, MR effect is improved. FEMM analysis also reveals that if the distance between the adjacent iron particles are reduced from 20 ?m to 10 ?m, a 40% increase in stored energy is observed. © 2014, Central South University Press and Springer-Verlag Berlin Heidelberg.Item Time delay approach for PSS and SSSC based coordinated controller design using hybrid PSO-GSA algorithm(Elsevier Ltd, 2015) Khadanga, R.K.; Satapathy, J.K.In this work we present a novel approach in order to improve the power system stability, by designing a coordinated structure composed of a power system stabilizer and static synchronous series compensator (SSSC)-based damping controller. In the design approach various time delays and signal transmission delays owing to sensors are included. This is a coordinated design problem which is treated as an optimization problem. A new hybrid particle swarm optimization and gravitational search algorithm (hPSO-GSA) algorithm is used in order to find the controller parameters. The performance of single-machine infinite-bus power system as well as the multi-machine power systems are evaluated by applying the proposed hPSO-GSA based controllers (PSS and damping controller). Various results are shown here with different loading condition and system configuration over a wide range which will prove the robustness and effectiveness of the above design approach. From the results it can be observed that, the proposed hPSO-GSA based controller provides superior damping to the power system oscillation on a wide range of disturbances. Again from the simulation based results it can be concluded that, for a multi-machine power system, the modal oscillation which is very dangerous can be easily damped out with the above proposed approach. © 2015 Elsevier Ltd. All rights reserved.Item Sound radiation and transmission loss characteristics of a honeycomb sandwich panel with composite facings: Effect of inherent material damping(Academic Press, 2016) Arunkumar, M.P.; Jagadeesh, M.; Jeyaraj, J.; Gangadharan, K.V.; Mailan Chinnapandi, M.C.L.This paper presents the results of numerical studies carried out on vibro-acoustic and sound transmission loss behaviour of aluminium honeycomb core sandwich panel with fibre reinforced plastic (FRP) facings. Layered structural shell element with equivalent orthotropic elastic properties of core and orthotropic properties of FRP facing layer is used to predict the free and forced vibration characteristics. Followed by this, acoustic response and transmission loss characteristics are obtained using Rayleigh integral. Vibration and acoustic characteristics of FRP sandwich panels are compared with aluminium sandwich panels. The result reveals that FRP panel has better vibro-acoustic and transmission loss characteristics due to high stiffness and inherent material damping associated with them. Resonant amplitudes of the response are fully controlled by modal damping factors calculated based on modal strain energy. It is also demonstrated that FRP panel can be used to replace the aluminium panel without losing acoustic comfort with nearly 40 percent weight reduction. © 2016 Elsevier Ltd