Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
9 results
Search Results
Item Recent advances in aluminizing of mild steel plates(Elsevier, 2024) Huilgol, P.; Bhat Panemangalore, D.; Bhat, K.U.; Bharadishettar, N.Aluminizing of steels is a surface modification method wherein the steel surface is subjected to thermo-chemical diffusion treatment at temperatures in the range of 700–1000°C. During the treatment, aluminium will diffuse into the surface and subsurface of the steel substrate, producing various aluminide phases. By controlling the process parameters, the type and quantity of aluminide phases can be controlled. The aluminides present beneficial properties, like increased strength and hardness, oxidation resistance, erosion resistance, abrasion resistance, etc. Hence, they are a better candidate material for designing the materials against scratch, erosion, fatigue, wear, oxidation, and corrosion. Many processing routes are available for aluminizing of steels and this entry reviews recent developments in the aluminising of mild steels. © 2024 Elsevier Ltd. All rights are reserved, including those for text and data mining, AI training, and similar technologies.Item High yield synthesis of carbon nanofibers in an environmental friendly route(Springer Nature, 2011) Ravindra, R.; Badekai Ramachandra, B.An environmental friendly route for the high yield synthesis of carbon nanofibers (CNFs) has been developed. CNFs have been synthesized using nickel formate as catalyst precursor at 680°C using chemical vapor deposition method. Upon pyrolysis this catalyst precursor yields metal catalyst nanoparticles directly. The sodium chloride and potassium chloride was used as catalyst support, it was chosen because of its non-toxic and water soluble nature. The problems such as detrimental effect, environment and even cost has been avoided by using water soluble supports. The structure of the products was characterized by scanning electron microscopy, transmission electron microscopy, Raman spectroscopy and X-ray diffraction method. The purity of as grown products and purified products was determined by thermal analysis. Here, we report the 7,800 and 7,200 wt% yield of CNFs synthesized over NaCl and KCl support. This synthetic route can be used for the large scale synthesis in industries. © 2011, The Author(s).Item Synthesis of worm-shaped carbon nanofibers over a sodium chloride support(2012) Ravindra, R.; Badekai Ramachandra, B.R.Worm-shaped carbon nanofibers (WCNFs) were synthesized in bulk by chemical vapour deposition at 680 °C using iron carboxylate as catalyst precursors and sodium chloride as catalyst support. The products were characterized by scanning electron microscopy, transmission electron microscopy, Raman spectroscopy and X-ray diffraction method. The purity of the purified products was determined by thermal analysis. TheWCNFyield was 6700% relative to catalyst. The simplicity, environmental friendliness and use of easily available low-cost precursors are the advantage of this synthesis technique. © Springer Science+Business Media B.V. 2012.Item Large scale synthesis of carbon nanofibres on sodium chloride support(InTech Europe info@sagepub.co.uk, 2012) Rajarao, R.; Badekai Ramachandra, B.R.Large scale synthesis of carbon nanofibres (CNFs) on a sodium chloride support has been achieved. CNFs have been synthesized using metal oxalate (Ni, Co and Fe) as catalyst precursors at 680 °C by chemical vapour deposition method. Upon pyrolysis, this catalyst precursors yield catalyst nanoparticles directly. The sodium chloride was used as a catalyst support, it was chosen because of its non-toxic and water soluble nature. Problems, such as the detrimental effect of CNFs, the detrimental effects on the environment and even cost, have been avoided by using a water soluble support. The structure of products was characterized by scanning electron microscopy, transmission electron microscopy and Raman spectroscopy. The purity of the grown products and purified products were determined by the thermal analysis and X-ray diffraction method. Here we report the 7600, 7000 and 6500 wt% yield of CNFs synthesized over nickel, cobalt and iron oxalate. The long, curved and worm shaped CNFs were obtained on Ni, Co and Fe catalysts respectively. The lengthy process of calcination and reduction for the preparation of catalysts is avoided in this method. This synthesis route is simple and economical, hence, it can be used for CNF synthesis in industries. © 2012 Rajarao and Bhat.Item Green approach to synthesize multi-walled carbon nanotubes by using metal formate as catalyst precursors(2013) Rajarao, R.; Badekai Ramachandra, B.The multi-walled nanotubes (MWNTs) have been synthesized in large scale by using metal formate as catalyst precursors. The calcium carbonate is used as catalyst support, it is chosen because of its non toxic and easily soluble nature. The synthesis was carried out by chemical vapor deposition method for 15 min under optimized conditions. The products were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy and X-ray diffraction (XRD) method. The purity of the as grown products and purified products were determined by thermal analysis. The obtained yield of MWNTs was about 8300 wt% relative to the nickel catalyst. This synthesis route avoids the lengthy process of calcination and reduction for the preparation of catalysts hence this method is more economical. This economical and environmental friendly synthesis route can be used for synthesizing MWNTs in large scale. Copyright © 2013 American Scientific Publishers All rights reserved.Item Fabrication and performance evaluation of hybrid supercapacitor electrodes based on carbon nanotubes and sputtered TiO2(Institute of Physics Publishing michael.roberts@iop.org, 2016) Aravinda, L.S.; Nagaraja, K.K.; Nagaraja, H.S.; Bhat, K.U.; Badekai Ramachandra, B.R.We report a simple and eco-friendly method for the fabrication of a titanium dioxide/functionalized multiwalled carbon nanotube (TiO2/FMWCNT) composite electrode for use in supercapacitors. The nanocomposite electrodes were formed by depositing titanium dioxide onto FMWCNTs using reactive magnetron sputtering, thus providing a green roue for the formation of the binder-free composite electrode. It is shown that the electrochemical performance of the fabricated electrodes can be altered by tuning the thickness of the titanium dioxide overlayer. The integrated nanocomposite electrode showed an improved specific capacitance of 90 Fg-1 in two-electrode configuration. © 2016 IOP Publishing Ltd.Item Growth of Very Large MoS2Single Crystals Using Out-Diffusion Transport and Their Use in Field Effect Transistors(Institute of Electrical and Electronics Engineers Inc., 2021) Pandey, S.K.; Izquierdo, N.; Campbell, S.Monolayer molybdenum disulfide (MoS2) is an attractive 2D material with a wide range of potential applications in the field of electronics and optoelectronics. To obtain the best performance, it is very necessary to grow large area single crystals of MoS2 (single domain) to avoid the effects of grain boundaries, but is exceptionally challenging to do this. Here, we report a novel method which we call out-diffusion vapor transport to grow large area single crystal monolayer MoS2 using an otherwise conventional chemical vapor deposition system. In this method, microchannels were created on the boat to significantly limit the region where MoOx vapor can react with S vapor to form crystals. This growth method resulted in triangular monolayer MoS2 single crystals up to ?640 ?m on a side grown on an oxidized silicon substrate, the largest crystals reported to date. Most of these crystals were multilayer at the center. This common feature has been identified in the literature as partially reduced transition metal oxide nucleates a second layer. We also achieved fully monolayer MoS2 single crystals up to ?450 ?m on a side, the largest demonstrated without the MoOx. Fabricated field effect transistors (FET) using MoS2 monolayer crystal as the active layer demonstrate a conventional n-type behavior, room-temperature mobility up to 45.5 cm2 V-1 s-1 and a maximum ON-Current (ION)/OFF-current (IOFF) ratio of 1.8 × 107. Raman and Photoluminescence results indicate that the as-grown large area monolayer crystals have high crystalline quality and uniformity with minimal defects, a finding that is consistent with the high electron mobility. This research work provides a superior technique to grow large-area high-quality single-crystal monolayer MoS2 without resorting to exotic equipment or techniques. © 2002-2012 IEEE.Item Large and Uniform Single Crystals of MoS2Monolayers for ppb-Level NO2Sensing(American Chemical Society, 2022) Patel, C.; Singh, R.; Dubey, M.; Pandey, S.K.; Upadhyay, S.N.; Kumar, V.; Sriram, S.; Than Htay, M.; Pakhira, S.; Atuchin, V.V.; Mukherjee, S.Recently, unprecedented interest has been immersed toward the synthesis of two-dimensional (2D) transition metal dichalcogenides via the chemical vapor deposition (CVD) system. Synthesis of a uniform and large-sized monolayer MoS2atomic thin film via CVD is still a major bottleneck owing to strong dependence on diverse associated growth parameters. In this work, we have proposed the most viable recipe which is suitable for controlling the nucleation density of Mo and producing a 90 μm-long MoS2monolayer crystal and (695 × 394.8) μm2large MoS2monolayered film on SiO2/Si and c-plane sapphire, respectively. Moreover, MoS2monolayer sensing performance has been thoroughly investigated for NO2exposure at room temperature with a varying response of 4-57.5 for the 100-100 ppm level. Furthermore, the MoS2monolayer sensor exhibits an ultrasensitive NO2detection with limit of detection and limit of qualification values of 1.4 and 4.6 ppb, respectively. In addition, the first-principles-based density functional theory has been employed to analyze the adsorption of NO2on the surfaces of the 2D MoS2monolayer. It is observed that the electronic band gap of the MoS2monolayer after NO2adsorption is reduced by 0.7 eV due to molecular orbital hybridization. © 2022 American Chemical Society. All rights reserved.Item Growth optimization and DFT investigation of doping effect on properties of VS2 monolayer crystals(Springer Science and Business Media Deutschland GmbH, 2023) Yadav, A.K.; Patel, C.; Kiran, G.; Singh, R.; Singh, A.K.; Garg, V.; Mukherjee, S.; Pandey, S.K.The vanadium disulfide (VS2) material, a prominent member of the two-dimensional materials family, has great potential to bridge the performance gap between current performance and contemporary energy storage device needs. Here, we report the optimization of the growth temperature of VS2 monolayer crystals using a chemical vapor deposition system. It is also found the crystal size increases with the increase of growth temperature up to 770 °C. Further increasing of growth temperature resulted in a reduction of crystal size. The atomic force microscopy measurement demonstrated the growth of monolayer thick VS2 crystal. Raman spectra revealed the formation of H-phase monolayer high-quality VS2 crystals. To understand the precise impact of doping on electronic properties, the substitutional doping of VS2 monolayer with chromium, molybdenum, and tungsten was also examined using density functional theory. The VS2 monolayer exhibits an indirect energy band gap that decreases after chromium doping of the VS2 lattice and vanishes after molybdenum and tungsten doping. Finally, it is found that tungsten-doped VS2 monolayer exhibits strong metallic character and other exceptional properties, making it suitable for electrodes of various energy storage devices. Graphical abstract: [Figure not available: see fulltext.]. © 2023, The Author(s), under exclusive licence to EDP Sciences, SIF and Springer-Verlag GmbH Germany, part of Springer Nature.