Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Has files: NoSubject: search.filters.subject.Alternative fuels

Search Results

Now showing 1 - 10 of 24
  • No Thumbnail Available
    Item
    Comparison of performance of biodiesels of mahua oil and gingili oil in dual fuel engine
    (Serbian Society of Heat Transfer Engineers, 2008) Nadar, K.N.; Reddy, R.P.; Anjuri, E.R.
    In this work, an experimental work was carried out to compare the performance of biodiesels made from non edible mahua oil and edible gingili oil in dual fuel engine. A single cylinder diesel engine was modified to work in dual fuel mode and liquefied petroleum gas was used as primary fuel. Biodiesel was prepared by transesterification process and mahua oil methyl ester (MOME) and gingili oil methyl ester (GOME) were used as pilot fuels. The viscosity of MOME is slightly higher than GOME. The dualfuel engine runs smoothly with MOME and GOME. The test results show that the performance of the MOME is close to GOME, at the pilot fuel quantity of 0.45 kg/h and at the advanced injection timing of 30 deg bTDC. Also it is observed that the smoke, carbon monoxide and unburnt hydro carbon emissions of GOME lower than the MOME. But the GOME results in slightly higher NOx emissions. From the experimental results it is concluded that the biodiesel made from mahua oil can be used as a substitute for diesel in dual fuel engine.
  • No Thumbnail Available
    Item
    Combustion and emission characteristics of a dual fuel engine operated with mahua oil and liquefied petroleum gas
    (Serbian Society of Heat Transfer Engineers, 2008) Nadar, K.N.; Reddy, R.P.
    For the present work, a single cylinder diesel engine was modified to work in dual fuel mode. To study the feasibility of using methyl ester of mahua oil as pilot fuel, it was used as pilot fuel and liquefied petroleum gas was used as primary fuel. In dual fuel mode, pilot fuel quantity and injector opening pressure are the few variables, which affect the performance and emission of dual fuel engine. Hence, in the present work pilot fuel quantity and injector opening pressure were varied. From the test results, it was observed that the pilot fuel quantity of 5 mg per cycle and injector opening pressure of 200 bar results in higher brake thermal efficiency. Also the exhaust emissions such as smoke, unburnt hydrocarbon and carbon monoxide are lower than other pressures and pilot fuel quantities. The higher injection pressure and proper pilot fuel quantity might have resulted in better atomization, penetration of methyl ester of mahua oil and better combustion of fuel.
  • No Thumbnail Available
    Item
    Experimental investigation of esters of mahua oil as an alternative fuel for dual fuel engine
    (2008) Reddy, P.B.; Kapilan, N.; Reddy, R.P.
    In the present work, an attempt was made to use methyl ester of mahua oil (MEMO) as substitute for dieselin dual fuel engine. A four stroke single cylinder engine was modified to work in dual fuel mode. From the test results, it was observed that the MEMO could be used as pilot fuel in dual fuel engine. At lower loads, diesel gave higher brake thermal efficiency. But at higher loads, biodiesel resulted in brake thermal efficiency comparable with diesel and lower smoke and oxides of nitrogen emissions. From the test results, it was concluded that MEMO could be used as a substitute for diesel in dual fuel engine.
  • No Thumbnail Available
    Item
    Synthesis of biodiesel from edible and non-edible oils and characterisation
    (2009) Kapilan, N.; Ashok Babu, T.P.A.; Varun, J.D.
    In recent years, biodiesel has been receiving increasing attention because of scarcity and increasing cost of fossil fuels and growing emissions of combustion related pollutants. In the present work, biodiesel was synthesised via the transesterification of edible and non-edible oils such as gingili and mahua, with methanol as alcohol and sodium hydroxide as catalyst. The yield percentage obtained from non-edible mahua oil was comparable to that obtained from edible gingili oil, under optimum conditions. According to American Society of Testing and Methods (ASTM), several tests were conducted to characterise the biodiesel in relation to diesel oil, in order to evaluate various physical, chemical and thermal properties such as viscosity, acid value, iodine value, flash point, fire point and calorific value. From the results, it was observed that the fuel properties of biodiesel produced from mahua oil and gingili oil were within the recommended standards of biodiesel fuel of various countries. Hence the biodiesel produced from gingili oil and mahua oil can be used as a renewable alternative fuel for the diesel engine. © 2009 Energy Institute.
  • No Thumbnail Available
    Item
    Characterization and effect of using Mahua oil biodiesel as fuel in compression ignition engine
    (2009) Kapilan, N.; Ashok Babu, T.P.; Reddy, R.P.
    There is an increasing interest in India, to search for suitable alternative fuels that are environment friendly. This led to the choice of Mahua Oil (MO) as one of the main alternative fuels to diesel. In this investigation, Mahua Oil Biodiesel (MOB) and its blend with diesel were used as fuel in a single cylinder, direct injection and compression ignition engine. The MOB was prepared from MO by transesterification using methanol and potassium hydroxide. The fuel properties of MOB are close to the diesel and confirm to the ASTM standards. From the engine test analysis, it was observed that the MOB, B5 and B20 blend results in lower CO, HC and smoke emissions as compared to diesel. But the B5 and B20 blends results in higher efficiency as compared to MOB. Hence MOB or blends of MOB and diesel (B5 or B20) can be used as a substitute for diesel in diesel engines used in transportation as well as in the agriculture sector. © 2009 Science Press, Institute of Engineering Thermophysics, CAS and Springer Berlin Heidelberg.
  • No Thumbnail Available
    Item
    Effect of using Mahua as an alternative fuel in diesel engine
    (2009) Kapilan, N.; Ashok Babu, T.P.A.; Reddy, R.P.
    There is an increasing interest in India, to search for suitable alternative fuels that are environment friendly. This led to the choice of non-edible Mahua Oil (MO) as one of the main alternative fuels to diesel oil in India. The objective of the present work is to use MO as a partial renewable alternative substitute for diesel in the agricultural diesel engine. Since the viscosity of the MO is high, it was blended with conventional diesel oil in various proportions (M5, M10, M15 and M20 on volume basis) and fuel properties of the blends were determined and compared with the diesel. Engine tests were carried out on a single cylinder diesel engine at varying loads (0%, 25%, 50%, 75% and 100%), without making any modification in the fuel injection system and the results were compared with the diesel. The M5 and M10 blends resulted in performance and emission characteristics comparable to diesel operation and also emits lower carbon monoxide, hydrocarbon and smoke emissions as compared to other blends. From the analysis, it is concluded that the MO can be partially substituted for diesel oil in the diesel engine, without making any modification in the hardware of the engine.
  • No Thumbnail Available
    Item
    Combustion characteristics of diesel engine operating on jatropha oil methyl ester
    (Serbian Society of Heat Transfer Engineers, 2010) Dhananjaya, D.A.; Sudhir, C.V.; Mohanan, P.
    Fuel crisis because of dramatic increase in vehicular population and environmental concerns have renewed interest of scientific community to look for alternative fuels of bio-origin such as vegetable oils. Vegetable oils can be produced from forests, vegetable oil crops, and oil bearing biomass materials. Non-edible vegetable oils such as jatropha oil, linseed oil, mahua oil, rice bran oil, karanji oil, etc., are potentially effective diesel substitute. Vegetable oils have reasonable energy content. Biodiesel can be used in its pure form or can be blended with diesel to form different blends. It can be used in diesel engines with very little or no engine modifications. This is because it has combustion characteristics similar to petroleum diesel. The current paper reports a study carried out to investigate the combustion, performance and emission characteristics of jatropha oil methyl ester and its blend B20 (80% petroleum diesel and 20% jatropha oil methyl ester) and diesel fuel on a single-cylinder, four-stroke, direct injections, water cooled diesel engine. This study gives the comparative measures of brake thermal efficiency, brake specific energy consumption, smoke opacity, HC, NOx, ignition delay, cylinder peak pressure, and peak heat release rates. The engine performance in terms of higher thermal efficiency and lower emissions of blend B20 fuel operation was observed and compared with jatropha oil methyl ester and petroleum diesel fuel for injection timing of 20° bTDC, 23° bTDC and 26° bTDC at injection opening pressure of 220 bar.
  • No Thumbnail Available
    Item
    Performance and emission characteristics of a Kirloskar HA394 diesel engine operated on fish oil methyl esters
    (2010) Godiganur, S.; Suryanarayana Murthy, Ch.; Reddy, R.P.
    The high viscosity of fish oil leads to problem in pumping and spray characteristics. The inefficient mixing of fish oil with air leads to incomplete combustion. The best way to use fish oil as fuel in compression ignition (CI) engines is to convert it into biodiesel. It can be used in CI engines with very little or no engine modifications. This is because it has properties similar to mineral diesel. Combustion tests for methyl ester of fish oil and its blends with diesel fuel were performed in a kirloskar H394 DI diesel engine, to evaluate fish biodiesel as an alternative fuel for diesel engine, at constant speed of 1500 rpm under variable load conditions. The tests showed no major deviations in diesel engine's combustion as well as no significant changes in the engine performance and reduction of main noxious emissions with the exception on NOx. Overall fish biodiesel showed good combustion properties and environmental benefits. © 2009 Elsevier Ltd. All rights reserved.
  • No Thumbnail Available
    Item
    Experimental analysis of SI engine performance and emission characteristics with gasoline-denatured spirit blends as alternative fuels
    (2010) Hubballi, P.A.; Ashok Babu, T.P.
    The experimental study focused on investigating benefits of unleaded gasoline (P100) - denatured spirit [DNS (ethanol 93.3% v/v + water 6.7% v/v)] blends as fuel in a four cylinder four stroke SI engine. Performance tests were conducted to study volumetric efficiency (VolE), brake thermal efficiency (BThE), brake power (BP), engine torque (torque), brake specific fuel consumption (BSFC). Engine exhaust emissions were investigated for carbon monoxide (CO), hydrocarbons (HC), oxides of nitrogen (NOx) and carbon dioxide (CO2). Experiments were conducted at different engine speeds between 2500 - 4500 rpm maintaining throttle position of 50% throughout the experiments. The fuel blends used include DNS30P70 (ethanol 28 % + water 2% + gasoline 70 %), DNS50P50 (ethanol 46.65 % + water 3.35 % + gasoline 50 %) and DNS85P15 (ethanol 79.3 % + water 5.7 % + gasoline 15 %) which were compared with base fuel P100. The investigations revealed that blending DNS with P100 increases BThE, VolE, BP, torque and BSFC. The CO, HC, NOx and CO2 emissions in the exhaust decrease when compared to P100 operation. The DNS85P15 blend produced encouraging results in improved engine performance and decreased engine exhaust emission.
  • No Thumbnail Available
    Item
    Performance characteristics of a dual fuel engine operated with Mahua biodiesel and liquefied petroleum gas
    (ASTM International, 2011) Kapilan, N.; Ashok Babu, T.P.; Reddy, R.P.
    Fuel crisis because of dramatic increase in vehicular population and environmental concerns have renewed the interest of the scientific community to look for alternative fuels of bio-origin such as vegetable oils and ethanol. India is looking at biodiesel derived from Mahua oil (MO), as one of the renewable alternative fuels for compression ignition (CI) engine. Although MO biodiesel (MOB) has several advantages over fossil diesel, in the present scenario, the use of biodiesel is restricted due to its high cost. In India, liquefied petroleum gas (LPG) is easily available and is one of the cheapest gaseous fuels. Hence, use of LPG to fuel a CI engine along with MOB seems to be an option for substitution of fossil diesel. In the present work, LPG, which was fumigated along with the air and biodiesel was admitted into the engine cylinder through conventional fueling device as an igniter. A single cylinder CI engine was modified to work in dual fuel mode and engine tests were carried out at rated speed under variable load conditions. The performance of the engine in dual fuel mode was compared with the diesel. The dual fuel operation results in thermal efficiency close to the diesel and also reduces the NOx and smoke emissions significantly. From the experimental results, we concluded that biodiesel in dual fuel mode with cheaper gaseous fuel induction is an option for reducing the operating cost of the biodiesel fuelled CI engine. Copyright ©2011 by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959.