Faculty Publications

Now showing 1 - 3 of 3

Optimization of ferrochrome slag as coarse aggregate in concretes
(Techno Press technop2@chollian.net, 2019) Yaragal, S.C.; Kumar, B.C.; Mate, K.
The alarming rate of depletion of natural stone based coarse aggregates is a cause of great concern. The coarse aggregates occupy nearly 60-70% by volume of concrete being produced. Research efforts are on to look for alternatives to stone based coarse aggregates from sustainability point of view. Response surface methodology (RSM) is adopted to study and address the effect of ferrochrome slag (FCS) replacement to coarse aggregate replacement in the ordinary Portland cement (OPC) based concretes. RSM involves three different factors (groUnd granulated blast furnace slag (GGBS) as binder, flyash (FA) as binder, and FCS as coarse aggregate), with three different levels (GGBS (0, 15, and 30%), FA (0, 15, and 30%) and FCS (0, 50, and 100%)). Experiments were carried out to measure the responses like, workability, density, and compressive strength of FCS based concretes. In order to optimize FCS replacement in the OPC based concretes, three different traditional optimization techniques were used (grey relational analysis (GRA), technique for order of preference by similarity (TOPSIS), and desirability function approach (DFA)). Traditional optimization techniques were accompanied with principal component analysis (PCA) to calculate the weightage of responses measured to arrive at the final ranking of replacement levels of GGBS, FA, and FCS in OPC based concretes. Hybrid combination of PCA-TOPSIS technique is foUnd to be significant when compared to other techniques used. 30% GGBS and 50% FCS replacement in OPC based concrete was arrived at, to be optimal. © 2019 Techno-Press, Ltd.
Multi-criteria optimization of fly ash and iron ore tailing based concretes subjected to elevated temperatures
(Associated Cement Companies Ltd., 2019) Yaragal, S.C.; Babu Narayan, K.S.; Kumar, B.; Francis, J.G.
Due to the rapid increase in concrete utilization all over the world, there is increased consumption of Ordinary Portland Cement (OPC), natural fine aggregate (NFA), and natural coarse aggregates. Increased use of OPC, is posing a serious threat due to excess CO2 emissions, and its production is highly energy intensive. On the other hand, extraction and processing stone-based fine and coarse aggregates too, is energy intensive, and the virgin resources are fast depleting. Therefore, for sustainable development, efforts are on all over the world to look for alternative materials in place of conventional ones. In this study, it is attempted to partly replace OPC with fly ash (FA) and partly replace NFA by iron ore tailings (IOT) in concretes. The performance of such concretes at ambient and elevated temperatures is also presented. Full factorial design of experiments was adopted with two control factors under three levels of replacement, i.e., FA (0, 15, and 30% by weight of OPC) and IOT (0, 50, and 100% by volume of NFA). Total nine concrete mixes were prepared and tested for their compressive strengths at room temperature, and residual compressive strengths when subjected to various levels of elevated temperatures (200, 400, 600, and 800°C), and cost of these concretes has also been analyzed. Further, three traditional multi–criteria optimization methods, i.e., grey relational analysis (GRA), technique for order of preference by similarity to ideal solution (TOPSIS), and desirability function approach (DFA) were used to optimize concrete mixes. Results showed that TOPSIS based optimization method is more significant when compared to other two methods. Further, FA-based concrete mixes showed improved performance under multi-criteria optimization. © 2019, Associated Cement Companies Ltd. All rights reserved.
Numerical and experimental studies on sustainable alkali activated concretes at elevated temperatures
(Emerald Publishing, 2023) Yaragal, S.C.; Kumar, B.; Abhinav, M.U.
Purpose: To reduce environmental impact caused by excessive use of ordinary Portland cement (OPC) and to mitigate scarcity of base materials such as natural coarse aggregate (NCA), industrial by-products can be carefully used as alternatives to OPC and NCA, in production of concrete. This paper aims to describe the performance of using ground granulated blast furnace slag (GGBS), fly ash (FA) as a complete replacement to OPC and ferrochrome slag (FCS) as replacement to NCA in production of novel FCS based alkali activated slag/fly ash concretes (AASFC) and evaluate their performance at elevated temperatures. Design/methodology/approach: Two control factors with three levels each i.e. FA (0, 25 and 50 per cent by weight) and FCS (0, 50 and 100 per cent by volume) as a GGBS and NCA replacement, respectively, were adopted in AASFC mixtures. Further, AASFC mixture specimens were subjected to different levels of elevated temperature, i.e. 200°C, 400°C, 600°C and 800°C. Compressive strength and residual compressive strength were considered as responses. Three different optimization techniques i.e. gray relational analysis, technique for order preference by similarity to ideal solution and Desirability function approach were used to optimize AASFC mixtures subjected to elevated temperatures. Findings: As FA replacement increases in FCS based AASFC mixtures, workability increases and compressive strength decreases. The introduction of FCS as replacement to NCA in AASFC mixture did not show any significant change in compressive strength under ambient condition. AASFC produced with 75 per cent GGBS, 25 per cent FA and 100 per cent FCS was found to have excellent elevated temperature enduring properties among all other AASFC mixtures studied. Originality/value: Although several studies are available on using GGBS, FA and FCS in production of OPC-based concretes, present study reports the performance of novel FCS based AASFC mixtures subjected to elevated temperatures. Further, GGBS, FA and FCS used in the present investigation significantly reduces CO2 emission and environmental degradation associated with OPC production and NCA extraction, respectively. © 2019, Emerald Publishing Limited.

Faculty Publications

Browse

Filters

Settings

Sort By

Results per page

Search Results