Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Vishweshwara, P.S.Subject: search.filters.subject.Inverse

Search Results

Now showing 1 - 5 of 5
  • No Thumbnail Available
    Item
    Inverse Estimation of Interfacial Heat Transfer Coefficient During the Solidification of Sn-5wt%Pb Alloy Using Evolutionary Algorithm
    (Pleiades journals, 2019) Vishweshwara, P.S.; Gnanasekaran, N.; Mahalingam, M.
    The study of the interfacial heat transfer coefficient (IHTC) is one of the major concerns during solidification of casting. In order to find out the IHTC at the metal–mold interface, a one dimensional transient heat conduction model is numerically investigated during horizontal directional solidification of Sn–5wt%Pb alloy. The forward model is solved using explicit finite difference method to obtain the exact temperatures for the known boundary conditions. The estimation of the unknown IHTC is attempted using Particle Swarm Optimization (PSO) as an inverse approach along with Bayesian framework. In order to prove the robustness of the proposed methodology, the estimation is accomplished for the simulated measurements. The simulated measurements are then added with noise to replicate the experimental data. The present approach not only minimizes the difference between simulated and measured temperatures but also takes in to account “a priori” information about the unknown parameters. © 2019, Springer Nature Singapore Pte Ltd.
  • No Thumbnail Available
    Item
    A Surrogate Forward Model Using Artificial Neural Networks in Conjunction with Bayesian Computations for 3D Conduction-Convection Heat Transfer Problem
    (Springer, 2020) Kumar, M.K.; Vishweshwara, P.S.; Gnanasekaran, N.
    The present work describes the determination of heat flux at the boundary for a conjugate heat transfer problem based on a coupled three-dimensional conduction-convection fin numerical model, also referred to as complete model. The model is developed using commercially available software and solved along with Navier–Stokes equation in order to acquire the required temperature distribution. An inverse analysis is proposed by treating the boundary heat flux as unknown while the temperatures of the fin are known. The inverse analysis is greatly accomplished with the help of Bayesian framework that combines the solution of the forward model and the simulated measurements. Markov chain Monte Carlo (MCMC) is applied to explore the sample space that drives samples to proper convergence and the selection or acceptance of the new samples is performed using Metropolis–Hastings algorithm. Thus, the novelty of the present work is the use of artificial neural network (ANN) as surrogate model, that not only retains the full nature of the complete model but also acts as a fast forward model in the inverse analysis, within the Bayesian framework that quantifies the uncertainty of heat flux. The results of the present work emphasize that even for noise-added temperature data the final estimates are very close to the actual values and the uncertainty of the unknown heat flux is reported in terms of standard deviation accompanied by mean and maximum a posteriori (MAP). © 2020, Springer Nature Singapore Pte Ltd.
  • No Thumbnail Available
    Item
    A combined ANN-GA and experimental based technique for the estimation of the unknown heat flux for a conjugate heat transfer problem
    (Springer Verlag service@springer.de, 2018) Kumar, M.K.; Vishweshwara, P.S.; Gnanasekaran, N.; Balaji, C.
    The major objectives in the design of thermal systems are obtaining the information about thermophysical, transport and boundary properties. The main purpose of this paper is to estimate the unknown heat flux at the surface of a solid body. A constant area mild steel fin is considered and the base is subjected to constant heat flux. During heating, natural convection heat transfer occurs from the fin to ambient. The direct solution, which is the forward problem, is developed as a conjugate heat transfer problem from the fin and the steady state temperature distribution is recorded for any assumed heat flux. In order to model the natural convection heat transfer from the fin, an extended domain is created near the fin geometry and air is specified as a fluid medium and Navier Stokes equation is solved by incorporating the Boussinesq approximation. The computational time involved in executing the forward model is then reduced by developing a neural network (NN) between heat flux values and temperatures based on back propagation algorithm. The conjugate heat transfer NN model is now coupled with Genetic algorithm (GA) for the solution of the inverse problem. Initially, GA is applied to the pure surrogate data, the results are then used as input to the Levenberg- Marquardt method and such hybridization is proven to result in accurate estimation of the unknown heat flux. The hybrid method is then applied for the experimental temperature to estimate the unknown heat flux. A satisfactory agreement between the estimated and actual heat flux is achieved by incorporating the hybrid method. © 2018, Springer-Verlag GmbH Germany, part of Springer Nature.
  • No Thumbnail Available
    Item
    3D coupled conduction-convection problem using in-house heat transfer experiments in conjunction with hybrid inverse approach
    (Emerald Group Holdings Ltd., 2019) Vishweshwara, P.S.; Kumar, M.K.; Gnanasekaran, N.; Mahalingam, A.
    Purpose: Many a times, the information about the boundary heat flux is obtained only through inverse approach by locating the thermocouple or temperature sensor in accessible boundary. Most of the work reported in literature for the estimation of unknown parameters is based on heat conduction model. Inverse approach using conjugate heat transfer is found inadequate in literature. Therefore, the purpose of the paper is to develop a 3D conjugate heat transfer model without model reduction for the estimation of heat flux and heat transfer coefficient from the measured temperatures. Design/methodology/approach: A 3 D conjugate fin heat transfer model is solved using commercial software for the known boundary conditions. Navier–Stokes equation is solved to obtain the necessary temperature distribution of the fin. Later, the complete model is replaced with neural network to expedite the computations of the forward problem. For the inverse approach, genetic algorithm (GA) and particle swarm optimization (PSO) are applied to estimate the unknown parameters. Eventually, a hybrid algorithm is proposed by combining PSO with Broyden–Fletcher–Goldfarb–Shanno (BFGS) method that outperforms GA and PSO. Findings: The authors demonstrate that the evolutionary algorithms can be used to obtain accurate results from simulated measurements. Efficacy of the hybrid algorithm is established using real time measurements. The hybrid algorithm (PSO-BFGS) is more efficient in the estimation of unknown parameters for experimentally measured temperature data compared to GA and PSO algorithms. Originality/value: Surrogate model using ANN based on computational fluid dynamics simulations and in-house steady state fin experiments to estimate the heat flux and heat transfer coefficient separately using GA, PSO and PSO-BFGS. © 2019, Emerald Publishing Limited.
  • No Thumbnail Available
    Item
    Inverse estimation of heat flux under forced convection conjugate heat transfer in a vertical channel fully filled with metal foam
    (Elsevier Ltd, 2022) Trilok, G.; Vishweshwara, P.S.; Gnanasekaran, G.
    In this work, for the first time, a heat flux at the boundary is estimated for a conjugate heat transfer under forced convection in the presence of high porosity metal foams. For the forward problem a vertical channel experimental set up reported in the literature is considered. The metal foam placed in the vertical channel is subjected to constant heat flux through aluminum plate and airflow of various velocities is passed through vertical channel for removal of heat from the high porosity metal foam placed in the vertical channel. Six different velocities are considered and the required temperature distribution of the aluminum plate is obtained by solving Darcy extended Forchheimer and Local Thermal non-equilibrium models for metal foams. The forward problem, created using computational fluid dynamics in ANSYS-FLUENT, is substituted with Neural Network for faster computation of the forward problem. The maximum errors between the computational fluid dynamics and Artificial Neural Network models for the heat flux values of 466.66, 666.66 and 1133.3 W/m2 are found to be 0.086, 0.043, 0.092 respectively. The heat flux to the forward problem is treated as unknown and the same is estimated using an inverse method that couples Particle Swarm Optimization with Bayesian framework. The result of inverse estimation of exact temperature data shows that for a heat flux of 1266.64 W/m2 the error is found to be 1.6e−4%. Similarly, for the noise added temperature data, the absolute % error in heat flux of 599.985, 733.315 and 1266.635 W/m2 is 4.80e−2%, 2.20e−2%, 2.30e−2% respectively. © 2022 Elsevier Ltd