Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Filters

2013 - 20185

Settings

Author: search.filters.author.Vijayan, V.Subject: search.filters.subject.Aluminum

Search Results

Now showing 1 - 5 of 5
  • No Thumbnail Available
    Item
    The effect of the addition of strontium and cerium modifiers on microstructure and mechanical properties of hypereutectic Al-Si (LM30) alloy
    (ASTM International, 2013) Vijayan, V.; Ravi, M.; Prabhu, K.
    The present work deals with the melt treatment of LM30 hypereutectic Al-Si alloy using cerium and strontium and the assessment of its effect on microstructure and properties of the alloy. The addition of cerium simultaneously modified both primary and eutectic silicon, leading to an increase in ultimate tensile strength, as well as the wear resistance of the alloy. It was found that the coefficient of thermal expansion of the alloy decreased on modification of the microstructure. © 2013 by ASTM International.
  • No Thumbnail Available
    Item
    Effect of chilling and cerium addition on microstructure and cooling curve parameters of Al-14%Si alloy
    (Maney Publishing maney@maney.co.uk, 2015) Vijayan, V.; Prabhu, K.
    Al-14%Si alloys, with and without cerium, were cast at varying cooling rates by solidifying them in a crucible and against chills. The effect of melt treatment and chilling on microstructure and cooling curve parameters of the alloy was assessed. Ce treated alloys solidified in clay graphite crucible at a slow cooling rate showed refinement of primary silicon and the formation of Al-Si-Ce ternary intermetallic compound. The addition of Ce to the alloy solidified against chills resulted in simultaneous refinement and modification of primary and eutectic silicon. Nucleation temperatures of both primary and eutectic silicon decreased on addition of cerium. The formation of the intermetallic compound decreased with increase in cooling rate, leading to the modification of the eutectic silicon. The increase in the degree of modification of the eutectic Si was associated with the decrease in the volume fraction of the intermetallic compound formed. © 2015 Canadian Institute of Mining, Metallurgy and Petroleum Published by Maney on behalf of the Institute.
  • No Thumbnail Available
    Item
    The effect of simultaneous refinement and modification by cerium on microstructure and mechanical properties of Al-8% Si alloy
    (Taylor and Francis Ltd. maney@maney.co.uk, 2016) Vijayan, V.; Prabhu, K.N.
    The effect of cerium melt treatment on microstructure and mechanical properties of gravity die cast Al-8% Si alloy was studied. The addition of Ce transformed the large columnar ?-Al grains into fine equiaxed grains and modified the acicular eutectic Si into fine fibrous form. The addition of Ce resulted in the formation of needle-shaped complex Ce intermetallic along the grain boundaries. Electrical conductivity measurements are used for the first time to reveal the effect of Ce addition on modification of the eutectic Si. The electrical conductivity of the alloy increased with Ce melt treatment. Scanning Electron Microscopy results suggests that the Ce particles did not heterogeneously nucleate the ?-Al grains, instead the fine equiaxed grains were formed through an invariant reaction between the liquid melt and Ce phase. The ultimate tensile strength, % elongation and hardness of the alloy significantly improved due to simultaneous modification and refinement. © 2016 Informa UK Limited, trading as Taylor & Francis Group.
  • No Thumbnail Available
    Item
    The Effect of Chilling and Ce Addition on the Microstructure and Mechanical Properties of Al-23Si Alloy
    (Springer New York LLC barbara.b.bertram@gsk.com, 2017) Vijayan, V.; Prabhu, K.
    The present work involves the study of the effect of varying concentration of Ce addition on microstructure and mechanical properties of Al-23%Si alloys. Melt-treated alloys were solidified in copper, brass, stainless steel molds to assess the effect of cooling rate. The effect on microstructure was assessed by measuring the fineness of primary silicon and eutectic silicon particle characteristics. The Ce melt treatment transformed the coarse and irregular primary silicon into refined polyhedral silicon crystals, and the effect was more significant at higher cooling rates. Although the melt treatment had refined the eutectic silicon at lower cooling rates, it did not show any considerable effect on the eutectic silicon at higher cooling rates. The mechanical properties of the alloy increased significantly with increase in cooling rates and cerium concentration. Analysis of the results and literature reveals that the refined primary silicon was formed as a result of an invariant reaction between Ce compounds and primary silicon at higher temperatures. © 2016, ASM International.
  • No Thumbnail Available
    Item
    The effect of Sr modification on thermal diffusivity of Al–8Si alloy
    (Taylor and Francis Ltd. michael.wagreich@univie.ac.at, 2018) Vijayan, V.; Prabhu, K.N.
    Newtonian and Fourier analysis techniques were used to calculate the solid fraction and latent heat during the solidification of Al–8Si alloy and the subsequent results were used to study the effect of Sr modification on thermal diffusivity of the solidifying melt. The results indicate that the thermal diffusivity increased significantly with increase in Sr content. The increase in the thermal diffusivity was attributed to the increase in the electronic conduction of the modified alloy due to the decreased activity of the bifilm. The results also indicate that the latent heat evolved during solidification increased with increase in Sr concentration and was associated with the increase in the solidification range that occurred during the modification process. © 2017 Informa UK Limited, trading as Taylor & Francis Group.