Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
2 results
Search Results
Item Influence of die angle on containerless extrusion of commercially pure titanium tubes(2007) Srinivasan, K.; Venugopal, P.Containerless tube extrusion has been investigated with commerically pure titanium at room temperature and a strain rate of 0.07 s-1 using 20 conical dies of five different strains and four different angles with MoS2 lubricant. Theoretical punch pressures have been calculated using appropriate equations from slab analysis of the process and compared with experimentally determined punch pressures. It is found that there exists an optimum angle at which the punch pressure is the least at a given strain.Item Formability limit in containerless (open die) extrusion of commercial purity titanium rods and tubes(2008) Srinivasan, K.; Venugopal, P.Containerless extrusion requires far less forces compared to conventional direct extrusion of rods and tubes due to the elimination of container wall-billet friction. But the strains that can be imparted are less in the former due to the unsupported billet which gets upset first if the axial stress exceeds yield stress of the billet material. If this stress is equal to yield stress, it corresponds to the limit of the process of pure containerless extrusion. It is found that this limit strain as predicted by theory is far less compared to what is observed experimentally. This discrepancy is explained on the basis of heating that takes place in the deformation zone due to ideal, frictional, and shear work done in carrying out the extrusion process.