Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Venkataramana, K.Subject: search.filters.subject.building

Search Results

Now showing 1 - 3 of 3
  • No Thumbnail Available
    Item
    Significance of modeling techniques in pushover analysis of RC buildings
    (2010) Thapa, M.; BabuNarayan, K.S.; Halemane, K.P.; Venkataramana, K.; Yaragal, S.C.; Ramesh Babu, R.; Sharma, A.; Reddy, G.R.
    The study presented here focuses on the effectiveness of the models adopted for the nonlinear static pushover (NSP) analysis and providing the best model that can predict the nonlinear response of RC buildings with sufficient accuracy with respect to the experimentally obtained results. NSP analysis considers material nonlinearity and is an effective tool to evaluate the performance of the structure under lateral seismic loads. However, the actual test data in order to verify the results of NSP analysis are very rare for RC structures, which are analytically sensitive to the models and procedure adopted by the analyzer. Under the present work three cases of geometric models; a) Frame with beamcolumn elements, b) Frame with beam-column elements and slabs modelled as a rigid diaphragm and c) Frame with beam-column elements and slabs modelled as shell element considering concrete as confined and unconfined were analyzed. Comparision of analytical curve with the experimental pushover curve, clearly suggests that frame modelled as confined beam-column elements and slabs modelled as a rigid diaphragm gives closer results. © 2010 CAFET-INNOVA TECHNICAL SOCIETY. All rights reserved.
  • No Thumbnail Available
    Item
    Strength retention characteristics of concrete cubes subjected to elevated temperatures
    (2010) Yaragal, S.C.; Clarke, K.S.; Mahesh Babu, K.; Ashokumar, S.; Venkataramana, K.; Babu Narayan, K.S.; Chinnagiri Gowda, H.C.; Reddy, G.R.; Sharma, A.
    Concrete in structures is likely to be exposed to high temperatures during fire. The relative properties of concrete after such an exposure are of great importance in terms of the serviceability of buildings. The probability of its exposure to elevated temperatures is high due to natural hazards, accidents and sabotages. Therefore, the performance of concrete during and after exposure to elevated temperature is a subject of great interest to the designer. Physical changes like cracking, colour change, spalling and chemical changes like decomposition of Ca(OH)2 and the C-S-H gel take place when subjected to elevated temperatures. This work reports the characteristics of concrete at elevated temperatures. Popular normal strength grades (M20, M25, M30, M35, M40 and M45) produced by Ready Mix Concrete (RMC) India, Mangalore have been used in production of test specimens (150 mm cubes) to obtain more meaningful and realistic data. In the preliminary phase 150 mm cubes were cast, cured and tested by destructive method for gathering data on strength characteristics. Later these test samples were subjected to elevated temperatures ranging from 100°C to 800°C, in steps of 100°C with a retention period of 2 hours. After exposure, weight losses were determined and then again destructive tests were conducted to estimate the residual compressive strength. Test results indicated that weight and strength significantly reduces with an increase in temperature. © 2010 CAFET-INNOVA TECHNICAL SOCIETY.
  • No Thumbnail Available
    Item
    Effect of Coir Reinforced Soil on the Seismic Response of RC Framed Buildings
    (Springer, 2022) Sreya, M.V.; Jayalekshmi, B.R.; Venkataramana, K.
    This study examines the effectiveness of reinforcing the soil with coir mat, a natural material, to act as a seismic soil-isolation medium. A 3D finite element simulation has been carried out on models of five-storey buildings resting on raft foundations in soft and stiff soil with and without the soil-isolation mechanism. The optimum values of the parameters such as the depth of embedment, width, and thickness of the coir mat have been analyzed. The isolated soil-structure system was exposed to two different earthquake motions, such as El Centro (1940) and simulated seismic excitation corresponds to the elastic design spectrum for Zone III as per the Indian Standard code (IS 1893 (Part 1): 2016). The optimum value for the depth of embedment, width, and thickness of the coir mat was identified as B/18, B/0.45 and B/36. The proposed study also deals with the coir (C) mat composited with other isolation materials such as polyethylene (PE) foam, rubber (RU) mat and geomembrane (G) to form C-PE, C-RU and C-G mats. These composites were proposed to increase the durability of the coir mat. The reinforcement of the C-PE mat shows a maximum of about 30% reduction in roof acceleration and 68% reduction in contact pressure. A pore water pressure analysis of soil bed also has been carried out to study the efficacy of these materials to reduce the excess pore water pressure generated in soil under earthquake loading. For that, a simple soft soil is modelled in Cyclic 1D software with and without the soil-isolation mechanism. The soil bed was exposed to El Centro (1940) and Northridge (1994) input motions. C-PE mat significantly reduces the excess pore water pressure by almost 93% and 88% in soil under El Centro and Northridge input motions, respectively. © 2022, Indian Geotechnical Society.