Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Venkataramana, K.Subject: search.filters.subject.Earthquakes

Search Results

Now showing 1 - 5 of 5
  • No Thumbnail Available
    Item
    Performance appraisal of RC beams using welded wire fabrics as lateral reinforcement in seismic zones
    (CAFET INNOVA Technical Society 1-2-18/103, Mohini Mansion, Gagan Mahal Road, Domalguda, Hyderabad 500029, 2011) Gowda, H.C.C.; Babu Narayan, K.S.; Venkataramana, K.
    Ductility is the key to design earthquake resistant structures. More rigid the structure or the element, more it attracts inertia forces. Structures and elements of infinite rigidity are out of question. Codes of practice also advocate design philosophies wherein effects of small earthquakes are to be absorbed with little or no damage, medium with damage to such extents that rehabilitation is possible and large earthquake effects to be catered without collapse. To absorb the tremendous energies that are input to structures and elements unless ductility is ensured, performance levels proposed by codes and standard practices cannot be attained. Lateral ties hold longitudinal reinforcement of R.C.elements in place and also confine the concrete. The basis of the present work is the usage of welded wire fabrics as lateral reinforcement in RC beams. A series of beams were tested with lateral ties and welded wire fabric at discrete locations and welded wire fabric alone throughout the beam with different mesh opening sizes. This paper presents the encouraging results with marginal increase in strength and considerable improvement in ductility in addition to reduced crack widths as observed for specimens having welded wire fabric with smaller mesh openings as lateral reinforcement by confining concrete. © 2011 CAFET-INNOVA TECHNICAL SOCIETY. All rights reserved.
  • No Thumbnail Available
    Item
    Full scale experiment and finite element modeling of support structures of substation equipment for evaluation of ground motion amplification
    (2012) Nandam, S.; Ramesh Babu, R.; Venkataramana, K.
    Post earthquake performance of porcelain insulators installed for high voltage substation equipment, in general, revealed their vulnerability to failure, not due to any quality deficiency, but due to failure of their supporting structures. Most of the equipment in standalone state, withstood to tests of induced vibrations conforming to International standards. The same tested equipment, when erected in position over its supporting structure failed to sustain earthquake ground accelerations, as the supporting structure adversely contributed to amplification of the ground seismic motions while traversing to the top of the structure or the base of the insulator. This paper critically examines salutary effects of damping of vibrations on a typical instrument- transformer, using a rubber based elastic damper, with particular reference to the connected porcelain insulators, in partial containment of amplification of earthquake acceleration or in minimizing attendant distress on them. The analytical study carried out is based on experimental studies conducted on the equipment using shake table and then correlating the results obtained using finite element analysis, on the full scale model to draw meaningful conclusions. © 2012 CAFET-INNOVA TECHNICAL SOCIETY.
  • No Thumbnail Available
    Item
    Seismic response analysis of reinforced concrete frames including soil flexibility
    (Techno-Press, 2013) Jayalekshmi, B.R.; Deepthi Poojary, V.G.; Venkataramana, K.; Shivashankar, R.
    The seismic response of RC space frame structures with isolated footing resting on a shallow soil stratum on rock is presented in this paper. Homogeneous soil stratum of different stiffness in the very soft to stiff range is considered. Soil, footing and super structure are considered to be the parts of an integral system. A finite element model of the integrated system is developed and subjected to scaled acceleration time histories recorded during two different real earthquakes. Dynamic analysis is performed using mode superposition method of transient analysis. A parametric study is conducted to investigate the effect of flexibility of soil in the dynamic behaviour of low-rise building frames. The time histories and Fourier spectra of roof displacement, base shear and structural response quantities of the space frame on compliant base are presented and compared with the fixed base condition. Results indicate that the incorporation of soil flexibility is required for the realistic estimate of structural seismic response especially for single storey structures resting on very soft soil. Copyright © 2013 Techno-Press, Ltd.
  • No Thumbnail Available
    Item
    Pore Water Pressure Analysis in Coir Mat-Reinforced Soil Incorporating Soil-Structure Interaction
    (Springer Science and Business Media Deutschland GmbH, 2022) Sreya, M.V.; Jayalekshmi, B.R.; Venkataramana, K.
    The proposed study investigates the effectiveness of reinforcing the soft soil by a coir mat, a natural material, to act as a seismic soil-isolation medium. A 3D finite element simulation in PLAXIS 3D software has been carried out on models of five-storey buildings resting on raft foundations in soft soil with and without the soil-isolation mechanism. This study also deals with the coir composites, coir–polyethylene and coir–rubber were proposed to increase the durability of the coir mat. The isolated soil-structure system was exposed to four different earthquake motions, such as the ground motions corresponding to the elastic design spectrum for Zone III as per the Indian standard code (IS 1893 (Part 1): 2016), the scaled Northridge earthquake (1994), El Centro earthquake (1940) and Chi-Chi earthquake (1999). A pore water pressure analysis of soil bed has been carried out to study the efficacy of these materials to reduce the excess pore water pressure generated in soil under earthquake loading. The other parameters, such as shear strain mobilized shear strength, effective stress in soil, and roof acceleration, in the building were analyzed. Isolation efficiencies of reinforcement materials to reduce the excess pore water pressure generated in soil under different earthquake motions obtained are 75–82%, 71–80% and 67–72% with coir, coir–polyethylene and coir–rubber, respectively. The resulting shear strain in soil reinforced by isolation mats is lower than that in unreinforced soil because the isolation mats strengthen the soil. Compared to the unreinforced soil, the mobilized shear strength and effective stress in the soil are increased when it is reinforced with coir and coir composites. The roof acceleration and bottom acceleration in the building got reduced by the isolation mechanism. © 2022, The Author(s), under exclusive licence to Springer Nature Switzerland AG.
  • No Thumbnail Available
    Item
    Effect of Coir Reinforced Soil on the Seismic Response of RC Framed Buildings
    (Springer, 2022) Sreya, M.V.; Jayalekshmi, B.R.; Venkataramana, K.
    This study examines the effectiveness of reinforcing the soil with coir mat, a natural material, to act as a seismic soil-isolation medium. A 3D finite element simulation has been carried out on models of five-storey buildings resting on raft foundations in soft and stiff soil with and without the soil-isolation mechanism. The optimum values of the parameters such as the depth of embedment, width, and thickness of the coir mat have been analyzed. The isolated soil-structure system was exposed to two different earthquake motions, such as El Centro (1940) and simulated seismic excitation corresponds to the elastic design spectrum for Zone III as per the Indian Standard code (IS 1893 (Part 1): 2016). The optimum value for the depth of embedment, width, and thickness of the coir mat was identified as B/18, B/0.45 and B/36. The proposed study also deals with the coir (C) mat composited with other isolation materials such as polyethylene (PE) foam, rubber (RU) mat and geomembrane (G) to form C-PE, C-RU and C-G mats. These composites were proposed to increase the durability of the coir mat. The reinforcement of the C-PE mat shows a maximum of about 30% reduction in roof acceleration and 68% reduction in contact pressure. A pore water pressure analysis of soil bed also has been carried out to study the efficacy of these materials to reduce the excess pore water pressure generated in soil under earthquake loading. For that, a simple soft soil is modelled in Cyclic 1D software with and without the soil-isolation mechanism. The soil bed was exposed to El Centro (1940) and Northridge (1994) input motions. C-PE mat significantly reduces the excess pore water pressure by almost 93% and 88% in soil under El Centro and Northridge input motions, respectively. © 2022, Indian Geotechnical Society.