Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
Search Results
Item Electrodeposition of Zn–Co Coating and its Electrochemical Performance(Pleiades journals, 2022) Bhat, R.S.; Manjunatha, K.B.; Venkatakrishna, K.; Hegde, A.C.Abstract: We report the acid chloride bath based electroplating of Zn–Co alloy on low carbon steel (LCS). As additives, the sulphanilic acid (SA) and gelatin were used for electroplating. The bath exhibited an anomalous co-deposition with a higher deposition of Zn over nobler Co. The role of bath composition, current density, partial current density, pH, and temperature on thickness, hardness, and corrosion resistance of deposit was studied. The corrosion behavior in 3.5 wt % sodium chloride solution and electrochemical behavior in acid chloride solutions of Zn–Co alloy coatings were studied using the potentiodynamic polarization method and cyclic voltammetry technique respectively. Mott–Schottky plot with positive slope confirms the development of n-type semiconductor layer at the interface of substrate and coating, which results in superior corrosion resistance of coatings. The colorimetric method has been used to estimate the composition of the deposit and further verified by energy dispersive X-ray spectroscopy (EDX) technique. The surface features and the topographical structure of the alloy film were obtained by scanning electron microscopy (SEM) and atomic force microscopy (AFM) techniques. The results indicate that the Zn–Co alloy films exhibited superior corrosion resistance with the lowest corrosion rate (138 µm y–1). Hence this alloy coating will find suitable applications in automobile and aerospace industries. © 2022, Pleiades Publishing, Ltd.Item Electrochemical Studies of Zn-Ni-Fe Alloy Coatings for Better Corrosion Resistance Applications(Springer, 2022) Bhat, R.S.; Munjunatha, K.B.; Bhat, S.I.; Venkatakrishna, K.; Hegde, A.C.Anti-corrosive alloy coatings are a valuable solution to the protection of low carbon steel structures/equipment against corrosion. The Zn-Ni-Fe coatings have been deposited galvanostatically on low carbon steel from an acid chloride bath. Sulfanilic acid and gelatin were used as additives for the homogeneity of the deposit. The Hull cell method has been used to optimize both bath constituents and plating conditions. The corrosion behavior of the coating films was examined with potentiodynamic polarization and the electrochemical impedance spectroscopy methods. The effects of current density, pH, and temperature on deposit properties like hardness, thickness, and corrosion rates were examined. The electrochemical characteristics of the Zn-Ni-Fe have been studied by the cyclic voltammetry technique. The morphology of the deposit was investigated with scanning electron microscopy and the surface roughness of the coating film was analyzed by atomic force microscopy. The Ni and Fe contents in the deposit were analyzed by colorimetric technique and cross-checked with energy-dispersive x-ray analysis. The capacitive reactance at the interface is attributed to the excellent corrosion resistance at optimal current density (40 mA cm−2) as indicated by the Nyquist plot with large polarization resistance. Furthermore, the positive slope of Mott-Schottky revealed that the semiconductor film at the interface is n-type. The results show that a new Zn-Ni-Fe alloy coating film exhibits better corrosion resistance properties and can be executed in industrial applications such as machine tools, bolts, and nuts in the automobile for corrosion protection, etc. © 2022, ASM International.