Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Trifluoromethyl-quinolin-yl-thio-propanohydrazide as an effective inhibitor of mild steel corrosion in HCl solution(2006) Ramesh Saliyan, V.; Vasudeva Adhikari, A.V.3-{[8-(trifluoromethyl)quinolin-4-yl]thio}propanohydrazide(TFQTPH) was synthesized, characterized and tested as a corrosion inhibitor for mild steel in 1 M HCl and 2 M HCl solution using different techniques: potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The results showed that TFQTPH is an excellent inhibitor for mild steel in acid medium. The inhibition was assumed to occur via adsorption of the inhibitor molecule on the metal surface. In the temperature range 20° to 60° C, the TFQTPH adsorption follows Langmuir isotherm model. The protection efficiency increased with increasing inhibitor concentration (10 to 500 ppm), even at higher temperature also, it recorded good inhibition efficiency. © 2006 SAEST.Item Quinolin-5-ylmethylene-3-{[8-(trifluoromethyl)quinolin-4-yl]thio}propanohydrazide as an effective inhibitor of mild steel corrosion in HCl solution(2008) Saliyan, V.R.; Vasudeva Adhikari, A.V.Quinolin-5-ylmethylene-3-{[8-(trifluoromethyl)quinolin-4-yl]thio}propanohydrazide (QMQTPH) was synthesized, characterized and tested as a corrosion inhibitor for mild steel in 1 M and 2 M HCl solution using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). Polarization resistances calculated from the EIS measurements were in good agreement with those obtained from direct current (DC) polarization measurements. The mild steel samples were also analyzed by scanning electron microscopy (SEM). The results showed that QMQTPH is an excellent inhibitor for mild steel in acid medium. The inhibition was assumed to occur via adsorption of the inhibitor molecule on the metal surface. It acts as an anodic inhibitor. In the 30° to 60 °C temperature range, the QMQTPH adsorption follows Langmuir isotherm model. The protection efficiency increased with increasing inhibitor concentration in the range 10-5 - 10-3 M, but slightly decreased with increasing temperature. © 2007 Elsevier Ltd. All rights reserved.Item Inhibition of corrosion of mild steel in acid media by N'-benzylidene-3- (quinolin-4-ylthio)propanohydrazide(2008) Ramesh Saliyan, V.; Vasudeva Adhikari, A.V.In the present investigation a new corrosion inhibitor, N'-(3,4-dihydroxybenzylidene)-3-{[8-(trifluoromethyl)quinolin-4-yl]thio} propanohydrazide(DHBTPH) was synthesized, characterized and tested as a corrosion inhibitor for mild steel in HCl (1 M, 2 M) and H2SO 4 (0.5 M, 1 M) solutions using weight-loss method, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization methods. The corrosion inhibition efficiency measured by all the above three techniques were in good agreement with each other. The results showed that DHBTPH is a very good inhibitor for mild steel in acidic media. The inhibition efficiency in different acid media was found to be in the decreasing order 0.5 M H 2SO4 > 1 M HCl > 1M H2SO4 > 2 M HCL The inhibition efficiency increases with increasing inhibitor concentration and with increasing temperature. It acts as an anodic inhibitor. Thermodynamic and activation parameters are discussed. Adsorption of DHBTPH was found to follow the Langmuir's adsorption isotherm. Chemisorption mechanism is proposed. The mild steel samples were also analysed by scanning electron microscopy (SEM). © Indian Academy of Sciences.Item N?-[4-(diethylamino)benzylidine]-3-{[8-(trifluoromethyl) quinolin-4-yl]thio}propano hydrazide) as an effective inhibitor of mild steel corrosion in acid media(2009) Ramesh, S.V.; Vasudeva Adhikari, A.V.N?-[4-(diethylamino)benzylidine]-3-{[8-(trifluoromethyl)quinolin-4-yl]thio}propano hydrazide (DEQTPH) was newly synthesized, characterized and tested as a corrosion inhibitor for mild steel in HCl (1 M, 2 M) and H2SO4 (0.5 M, 1 M) solutions using weight loss method, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization method. The corrosion inhibition efficiencies measured by all the above three techniques were in good agreement with each other. The mild steel samples were also analyzed by scanning electron microscopy (SEM). The results showed that DEQTPH is an excellent inhibitor for mild steel in acid media. The inhibition efficiency in different acid media was found to be in the order, 0.5 M H2SO4 > 1.0 M HCl > 2.0 M HCl > 1.0 M H2SO4. The inhibition was assumed to occur via adsorption of the inhibitor molecule on the metal surface. It acts as an anodic inhibitor. In the 30-60 °C temperature range, the DEQTPH adsorption follows Langmuir isotherm model. The protection efficiency increased with increasing inhibitor concentration in the range 0.2 × 10-4 to 10.5 × 10-4 M and slightly increased with increasing temperature. Thermodynamic characteristics were discussed. Chemisorption mechanism is proposed. © 2009 Elsevier B.V. All rights reserved.