Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Processing techniques of recycled aggregates(Elsevier, 2025) Trivedi, S.S.; Das, B.B.; Barbhuiya, S.Three essential components of every modern-day growth are preservation of natural aggregate resources, green construction, and the safeguarding of the environment. One such endeavor is the incorporation of recycled aggregate (RA) in concrete. Because of the issues with its strength and durability, the use of RA is typically limited to inferior load constructions. With appropriate management and effective processing methods, the application can be expanded to high-strength concrete. In the present manuscript, the current C&D waste management practices adopted by various nations are highlighted alongside different in-action legislations are thoroughly reviewed for developing an understanding about the basic elements involved in the debris management. In addition, some of the latest and novel recycling approaches are investigated such as autogenous cleaning method, air and hydraulic jigging technologies, and advanced dry recovery system. To investigate the nature of RA processed from aforementioned technologies, the inherent properties of aggregates such as specific gravity, water absorption, density, and abrasion values alongside microstructure performance through scanning electron microscopy (SEM) are comprehensively reviewed and presented. Based on the extensive investigation, it is recognized that effective C&D waste management can be accomplished using certain techniques such as circular procurement and green construction. Furthermore, there is a requirement for specified processing methods that enhances the physio-chemical properties. Also, the surface morphology can be improved using combined crushing and ball milling approaches. Overall, it is recommended to implement vertical shaft crushing and ball milling for the development of fine RA whereas for the coarse RA fractions, multistage jaw crushing and advanced dry recovery (ADR) system are some of the finest processing approaches. © 2025 Elsevier Ltd. All rights reserved.Item Influence of multi-stage processing and mechano-chemical treatments on the hydration and microstructure properties of recycled aggregate concrete(Elsevier Ltd, 2023) Trivedi, S.S.; Sarangi, D.; Das, B.B.; Barbhuiya, S.On account of the shortage of naturally occurring coarse aggregate, recycled aggregate (RA) made from crushed concrete debris is now used in the construction industry. With this rise in the utilisation of recycled aggregate in the construction sector, there has been extensive research into ways to improve its quality. The significant fraction of mortar remains that are left on the RA surface is the primary factor that affects its quality. Concrete made from RA loses strength and mechanical performance due to the attached mortar's increased porosity and water absorption values and the frailer transition region between the new mortar and aggregates. In order to minimise the old cement fractions and increase the quality, this paper studies the effect of concrete incorporating multi-stage processed RA from demolished concrete waste, followed by treatment with mechanical abrasion and sodium silicate immersion. The recycled aggregates were produced through multi-stage jaw crushing, followed by utilising natural aggregate, recycled aggregate, and recycled aggregate obtained after mechanical abrasion, followed by sodium silicate treatment for concrete mix design at various substitution percentages as coarse aggregates. The experimental investigation further progresses with the evaluation of mechanical and durability properties of concrete mixes, which is additionally followed by microstructural studies such as scanning electron microscopy (SEM), Energy dispersive X-ray spectroscopy (EDAX), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and Thermogravimetry-differential thermal analysis (TG-DTA). The outcomes demonstrate that two-stage treatment, such as mechanical abrasion followed by sodium silicate immersion, yields superior-quality RA. Recycled aggregate concrete (RAC) made with these treated aggregates illustrated an increase in workability and density with respect to an untreated RAC mix. Furthermore, comparable strengths in compression, flexure, and tension are found in treated RAC mixes, particularly at 35% replacement levels, with respect to concrete mixes comprised of natural aggregates. A similar trend is detected in the chloride penetration tests and water sorptivity tests. In addition, the microstructural investigation confirmed the formation of additional calcium silicate hydrate for treated RAC mixes, particularly for the 35% substituted RA mix. On the basis of the results, it is suggested that multi-stage jaw crushing followed by treatment through mechanical abrasion and sodium silicate can potentially enhance the mechanical, microstructural, and durability performance of RAC. © 2023 Elsevier LtdItem Combined Effect of Multistage Processing and Treatment Methods on the Physical, Chemical, and Microstructure Properties of Recycled Concrete Aggregates(ASTM International, 2024) Trivedi, S.S.; Dixit, K.; Das, B.B.; Barbhuiya, S.This research aims to examine the effects of multistage processing on reducing the old cement fractions and enhancing the quality of concrete recycled aggregate (CRA). The investigation involves the use of demolished concrete debris and subsequent treatments in both single and multistage processes. The recycled aggregates (RAs) were obtained using a multistage jaw crushing process followed by utilizing natural aggregate, untreated RA, RA treated with hydrochloric acid (HCl) and sodium silicate (SS) immersion (single-stage treatment), and RA treated with mechanical scrubbing and SS immersion in two separate stages (multistage treatment). The subsequent phase of the experimental inquiry involves assessing the physical attributes of both treated and untreated RA. This is followed by conducting microstructural examinations utilizing techniques such as scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy (FTIR), and thermogravimetry-differential thermal analysis. The findings indicate that employing a two-step process, involving mechanical abrasion followed by immersion in SS, yields high-quality CRA. This conclusion is reinforced by the favorable physical performance observed. The water absorption values of CRA were lowered by 78 % through single-stage treatments such as immersion in HCl. The similar treatment is found to show densest concrete with calcium/silicon ratio reduced to around 81 % to that of untreated CRA. Additionally, for single-stage treated CRA samples, microstructural study using FTIR verified the creation of additional hydration products, whereas for two-stage treated CRA specimens, thermogravimetric analysis demonstrated the formation of stable CSH. According to the findings, it is advised to use a multistage process of jaw crushing, then treating it with mechanical abrasion and SS. This has the ability to improve the physical, chemical, and microstructural properties of CRA. © © 2024 by ASTM International,Item Effect of CO2 curing on phase compositions of nano silica blended cementitious mortar partially replaced with carbonated recycled fine aggregates(Elsevier Ltd, 2025) Trivedi, S.S.; Ansari, F.; Das, B.B.; Barbhuiya, S.This manuscript examines the quantification of CO2 uptake, hydration and carbonation phases such as calcium hydroxide (Ca(OH)2, CH), calcium carbonate (CaCO3, CC), magnesite (MgCO3), hydromagnesite (MgCO3.Mg(OH)2.4H2O, Hmgs), siderite (FeCO3) and subsequent carbonation and hydration degrees (CD, HD) in cementitious mortar (CM) incorporating colloidal nano silica (CNS) and carbonated and uncarbonated recycled concrete fine aggregates (RCF) subjected to accelerated carbonation curing (carbonated RCF- CRCF, Non-carbonated RCF- NCRCF). The RCF was prepared through multi cycle jaw crushing technology followed by repeated abrasion cycles and subsequently treated using accelerated carbonation. The mass loss resulting from the breakdown of these compounds at specific temperature ranges (220–350 °C for Hmgs, 250–400 °C for FeCO3, 400–500 °C for CH, 460–900 °C for MgCO3, and 600–800 °C for CC and CO2) was calculated using a thermogravimetric (TG) analyzer. The main findings of this research work confirms the presence of vaterite, calcite, tobermorite (Ca2.25[Si3O7.5(OH)1.5].8H2O or CSH gel), and magnesite polymorphs for CM incorporating 6–9 % CRCF and 1 % CNS as validated by the increased areas of peaks from fourier transform infrared spectroscopy (FTIR) analysis at 714 cm?1, 875 cm?1, 1007 cm?1, and 1405 cm?1, respectively which is further recognized by the increased peak intensities in X-ray diffraction (XRD) analysis. The important findings from the scanning electron microscopy (SEM) analysis revealed the development of additional C-S-H and calcite phases filling the pores and densifying the matrix in CRN mixes while the Ca/Si atomic ratio significantly decreased up to 67 % for CRN-19 mix as found by the energy dispersive X-ray spectroscopy (EDAX). The fresh and hardened state properties of blended mixes highlight the increase in dry density and compressive strength that are found maximum for CRN-19 mix of 57.9 MPa at 28 days owing to the highest rate of strength contribution of 27.95 % from the mix components such as 9 % CRCF and 1 % CNS. However, the flowability is observed to get reduced for all the mixes with CRN-13 mix illustrating approximately 83 % flow values with reference to the control mix. Furthermore, the durability performance of CRCF based primary mixes and all the secondary blends are found to show lowest ingress of chloride ions and permeable porosity values, illustrating up to 73 % and 39 % fall respectively to that of control mix at 28 and 56 days cured samples. Based on the comprehensive investigation and analysis, it is recommended to use pre-carbonated RCF and CNS for developing sustainable CM and achieving CO2 sequestration. © 2025 Elsevier Ltd