Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item The combined effects of carbon/nitrogen ratio, suspended biomass, hydraulic retention time and dissolved oxygen on nutrient removal in a laboratory-scale anaerobic–anoxic–oxic activated sludge biofilm reactor(IWA Publishing, 2018) Manu, D.S.; Thalla, A.K.The current trend in sustainable development deals mainly with environmental management. There is a need for economically affordable, advanced treatment methods for the proper treatment and management of domestic wastewater containing excess nutrients (such as nitrogen and phosphorus) which can cause eutrophication. The reduction of the excess nutrient content of wastewater by appropriate technology is of much concern to the environmentalist. In the current study, a novel integrated anaerobic–anoxic–oxic activated sludge biofilm (A2O-AS-biofilm) reactor was designed and operated to improve the biological nutrient removal by varying reactor operating conditions such as carbon to nitrogen (C/N) ratio, suspended biomass, hydraulic retention time (HRT) and dissolved oxygen (DO). Based on various trials, it was seen that the A2O-AS-biofilm reactor achieved good removal efficiencies with regard to chemical oxygen demand (95.5%), total phosphorus (93.1%), ammonia nitrogen concentration (NH4þ-N) (98%) and total nitrogen (80%) when the reactor was maintained at C/N ratio of 4, suspended biomass of 3 to 3.5 g/L, HRT of 10 h, and DO of 1.5 to 2.5 mg/L. Scanning electron microscopy (SEM) of suspended and attached biofilm showed a dense structure of coccus and bacillus bacteria with the diameter ranging from 0.3 to 1.2 ?m. The Fourier transform infrared (FTIR) spectroscopy results indicated phosphorylated macromolecules and carbohydrates mix or bind with extracellular proteins in exopolysaccharides. © IWA Publishing 2018.Item Evaluation, ranking, and selection of pretreatment methods for the conversion of biomass to biogas using multi-criteria decision-making approach(Springer, 2020) Vannarath, A.; Thalla, A.K.Lignocellulosic biomass resources include agri-waste and agri-biomass which are utilized as a suitable feedstock for bioenergy production. The recalcitrant nature of these biomass can be reduced by the application of various pretreatment methods to access the cellulosic content. This study depicts the evaluation and ranking of different pretreatment methods, and selecting the rank 1 as the best pretreatment method using multiple attribute decision-making approach to facilitate the increased biogas yield. The evaluation was done using technique for order preference by similarity to ideal solution (TOPSIS) and integrated design of experiments (DoE)–TOPSIS. Seven alternatives with five relevant attributes were adopted for this study. Based on the above decision-making framework, alkaline pretreatment (Ca(OH)2 (8%)) option was ranked first for both the techniques. The second and third options were NaOH and NH3.H2O (10%) pretreatment, respectively. The integrated DoE–TOPSIS method has reduced the uncertainty in results by considering different weight sets and replications. The model results and experimental results were in good agreement and portray the best pretreatment method to be employed in the anaerobic digestion, thus, minimizing the series of digestion test during the downstream process of pretreatment aided anaerobic digestion. © 2019, Springer Science+Business Media, LLC, part of Springer Nature.Item Effects of chemical pretreatments on material solubilization of Areca catechu L. husk: Digestion, biodegradability, and kinetic studies for biogas yield(Academic Press, 2022) Vannarath, A.; Thalla, A.K.This study aimed to understand the pretreatment-aided anaerobic digestion of lignocellulosic residues and to assess the substrate solubilization capacity of pretreatment processes. We evaluated the feasibility of biogas production using chemically pretreated Areca catechu L. (Arecanut husk, AH). AH was pretreated for 24h at two different temperatures—25 °C and 90 °C with four different chemicals viz. H2SO4 (acidic), NaOH (alkaline), H2O2 (oxidative), and ethanol in 1% H2SO4 (organosolv) under each temperature. AH solubilization assessment included analyses of parameters such as volatile solids to total solids (VS:TS) ratio, soluble chemical oxygen demand, total phenolic content, and biomass composition. Alkaline pretreatment of AH at 90 °C resulted in the maximum biogas yield of 683.89mL/gVS, which was 2.3 times more than that obtained using raw AH without pretreatment. Methane content of biogas produced using AH pretreated with 2–10% of NaOH was found to be between 71.53% and 75.06%; methane content of biogas using raw AH was 62.31%. In order to describe the AH degradation patterns, biogas production potential from pretreated AH was evaluated using bacterial kinetic growth models (First-order exponential, logistic, transference, and modified Gompertz models). The modified Gompertz and logistic models (correlation coefficient >0.99) were found to have the best fit of all kinetic models for the cumulative experimental biogas curve. We formulated a multiple linear regression equation depicting the biodegradability index (BI) as a technical tool to determine biomethane production; BI is represented as a function of biomass composition (cellulose, hemicellulose, and lignin), with a high correlation (>0.95). Based on our analyses of AH pretreatment and substrate utilization for biogas production, we propose that the biochemical composition of lignocellulosic residues should be carefully considered to ensure their biodegradability when subjected to anaerobic digestion. © 2022 Elsevier LtdItem Bioprospecting indigenous bacteria from landfill leachate for enhanced polypropylene microplastics degradation(Elsevier B.V., 2025) Dubey, A.P.; Thalla, A.K.Plastic pollution, especially microplastics (MPs), is a severe environmental threat. Due to the significant environmental issues posed by plastics, it is critical to use an effective and sustainable degradation technique. The study aimed to isolate and identify Indigenous bacterial strains from landfill leachate (LL) to evaluate its potential for degrading Polypropylene microplastics (PPMPs). The investigation identified two bacterial strains, Pseudomonas aeruginosa, and novel Staphylococcus haemolyticus, through 16S rRNA analysis, capable of decomposing PPMPs. Following a 30-day treatment period, it was noted that Staphylococcus haemolyticus reduced the dry weight of PPMPs by 25.46 % ± 1.35 %, whereas Pseudomonas aeruginosa strain reduced it by 7.01 % ± 0.85 %. Multiple tests, including weight loss, pH, optical density, total biomass yield, and BATH test of the medium, validated the growth of bacterial strains. The biochemical characteristics of the isolated strains were assessed through Biochemical tests. The study also investigated the surface, chemical, and structural changes in treated PPMPs using Scanning electron microscopy (SEM), Energy-Dispersive X-ray spectroscopy (EDS), X-ray diffractometer (XRD), and Ion Chromatography (IC) tests. The Fourier Transform Infrared Spectroscopy (FTIR) study also showed the creation of alcohol, methyl, as well as carbonyl groups due to hydrolysis and oxidation by both bacterial strains. This study implies that the Staphylococcus haemolyticus and Pseudomonas aeruginosa bacterial strains are secure and efficient for PPMP bioremediation. © 2025 Elsevier B.V.