Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
7 results
Search Results
Item Enhanced photocatalytic efficiency of layered CdS/CdSe heterostructures: Insights from first principles electronic structure calculations(Institute of Physics Publishing helen.craven@iop.org, 2020) Shenoy, S.; Tarafder, K.Metal sulfides are emerging as an important class of materials for photocatalytic applications, because of their high photo responsive nature in the wide visible light range. In this class of materials, CdS with a direct band gap of 2.4 eV, has gained special attention due to the relative position of its conduction band minimum, which is very close to the energies of the reduced protons. However, the photogenerated holes in the valence band of CdS are prone to oxidation and destroy its structure during photocatalysis. Thus constructing a CdS based heterostructure would be an effective strategy for improving the photocatalytic performance. In this work we have done a detail theoretical investigation based on hybrid density functional theory calculation to get insight into the energy band structure, mobility and charge transfer across the CdS/CdSe heterojunction. The results indicate that CdS/CdSe forms type-II heterostructure that has several advantages in improving the photocatalytic efficiency under visible light irradiation. © 2020 IOP Publishing Ltd.Item Fe-porphyrin on Co(001) and Cu(001): A Comparative Dispersion-augmented Density Functional Theory Study(Wiley-VCH Verlag info@wiley-vch.de, 2020) Azuri, I.; Ali, M.E.; Tarafder, K.; Oppeneer, P.M.; Kronik, L.We present a comparative density functional theory (DFT) investigation of the interaction of the iron porphyrin (FeP) molecule with the metallic Co(001) and Cu(001) surfaces, with the aim of elucidating the effect of different choices for the treatment of dispersion. We compare a GGA+U approach, several flavors of dispersion-augmented terms, and two variants of the vdW-DF approach, which treats long-range correlation explicitly. For the Co surface, we find that all approaches predict chemisorption and a high-spin state, although vdW-DF functionals generally predict weaker bonds and weaker chemisorption. For the Cu surface, we find that the functionals augmented by pair-wise dispersion once again predict chemisorption and a preferred HS state, but the vdW-DF functionals predict physisorption and a LS state. These results demonstrate the importance of careful assessment of the level of theory at which dispersion is treated, as this may have significant quantitative and even qualitative effects on the predictions made. The results also call for additional experimental data for these systems. © 2020 Wiley-VCH Verlag GmbH & Co. KGaA, WeinheimItem The role of synthesis vis-à-vis the oxygen vacancies of Co3O4 in the oxygen evolution reaction(Royal Society of Chemistry, 2022) Roy, S.; Devaraj, N.; Tarafder, K.; Chakraborty, C.; Roy, S.The oxygen evolution reaction over oxide vacancy-induced spinel Co3O4 is a topic of tremendous scientific attention owing to the favourable adsorption of water, as also shown here through DFT calculations. However, the inclusion of an optimum amount of oxygen-ion vacancies at the surface and in the bulk of Co3O4 remains a synthetic challenge in order to enhance the efficacy of the oxygen evolution reaction. Here, we have attempted a single-step scalable approach of solution combustion synthesis to incorporate the oxide ion vacancies in high-surface-area Co3O4. To benchmark the catalyst, we also synthesized Co3O4 using elevated-temperature calcination routes. Detailed structural and surface analyses revealed the significant presence of oxide ion vacancies in the combustion-synthesized material. The solution combustion synthesized Co3O4 due to the presence of oxygen-ion vacancies exhibited an excellent oxygen evolution reactivity with a lower overpotential and higher current density compared with the other Co3O4 materials synthesized using calcination routes. Tafel slope calculations indicated that the formation of surface hydroxyl species through water dissociation over the oxide ion vacancies is the rate-determining step of the overall reaction. The mechanistic role of the oxygen-ion vacancies in the oxygen evolution reaction was further explored via DFT studies. © 2022 The Royal Society of ChemistryItem Charge-transfer interface of insulating metal-organic frameworks with metallic conduction(Nature Research, 2022) Sindhu, P.; Ananthram, K.S.; Jain, A.; Tarafder, K.; Ballav, N.Downsizing materials into hetero-structured thin film configurations is an important avenue to capture various interfacial phenomena. Metallic conduction at the interfaces of insulating transition metal oxides and organic molecules are notable examples, though, it remained elusive in the domain of coordination polymers including metal-organic frameworks (MOFs). MOFs are comprised of metal centers connected to organic linkers with an extended coordination geometry and potential void space. Poor orbitals overlap often makes these crystalline solids electrical insulators. Herein, we have fabricated hetero-structured thin film of a Mott and a band insulating MOFs via layer-by-layer method. Electrical transport measurements across the thin film evidenced an interfacial metallic conduction. The origin of such an unusual observation was understood by the first-principles density functional theory calculations; specifically, Bader charge analysis revealed significant accumulation and percolation of charge across the interface. We anticipate similar interfacial effects in other rationally designed hetero-structured thin films of MOFs. © 2022, The Author(s).Item An Intricate Balance of Ionicity and Covalency: Metal-Like Conduction in All-Inorganic Halide Double Perovskite Cs2AgSbCl6(American Chemical Society, 2025) Kalyani, M.; Ananthram, K.S.; Saha, S.; Ninawe, P.; Tarafder, K.; Ballav, N.Halide perovskites have recently evolved as attractive materials with enormous technological significance due to synthetic control over the structure-property relationship. Halide perovskites are often realized to be either electrical insulators or semiconductors. We present an unusual metal-like conduction (thermally deactivated) in a Pb-free all-inorganic halide double perovskite, Cs2AgSbCl6. The experimental results were understood using density functional theory studies, combined with molecular dynamics simulations and electron localization function calculations, revealing retention of the predominant ionicity of the Ag-Cl bond and an increase in the covalency of the Sb-Cl bond at an elevated temperature, which resulted in a significant change of the electronic band structure, including the density of states, thereby exhibiting an intricate balance of ionicity and covalency. A significant modulation of the electrical conductivity (more than 3 orders of magnitude) without any noticeable structural change will stimulate the investigation of hitherto unknown electronic phase transitions in halide double perovskites. Additionally, light-induced unidirectional rectification of current in Cs2AgSbCl6 was ascribed to a dynamic internal polarization effect. © 2025 American Chemical Society.Item High Thermoelectric Figure of Merit (zT) in ?-Ag2Se via Aliovalent Doping(John Wiley and Sons Inc, 2025) Acharya, A.; Nagaraja, S.; Hassan, N.; Tarafder, K.; Ballav, N.High-performance thermoelectric materials are essential for efficient low-temperature (300–400 K) heat energy harvesting, with n-type Ag2Se being a promising candidate. To further enhance the thermoelectric figure of merit (zT) of Ag2Se, aliovalent doping has emerged as a key strategy. However, achieving wet-chemical aliovalent doping of Ag2Se at ambient temperature has proven challenging. In this work, a high zTmax of 1.57 at 398 K is reported for an optimally Cd(II)-doped Ag2Se sample, specifically in the structurally phase-pure Ag1.98Cd0.02Se, which is successfully synthesized via an aqueous-based method at room-temperature (300 K). The Ag1.98Cd0.02Se sample also exhibits an impressive average zTavg of 1.12 over the temperature range of 315–400 K. Density functional theory (DFT) calculations for both the pristine and doped samples reveal significant changes in the electronic band structures, including notable modulations in the density of states near the Fermi energy, particularly for the Ag-3d states. The remarkable thermoelectric performance of Ag1.98Cd0.02Se is attributed to an optimization of charge carrier induced by the Cd(II)-doping. © 2025 Wiley-VCH GmbH.Item Rotational Flexibility in Dication Drives Ambient Temperature Ferroelectricity in an Organic–Inorganic Hybrid Halide(John Wiley and Sons Inc, 2025) Hassan, N.; Panday, R.; Chandru, P.G.; Ananthram, K.S.; Jose, T.M.; Bhoi, U.; Sieradzki, A.; Zar?ba, J.K.; Boomishankar, R.; Tarafder, K.; Ballav, N.Organic–inorganic hybrid halides (OIHHs) have gained attention as potential ferroelectric materials due to structure-property synergy of the organic and inorganic constituents. This study introduces an unusual Ag(I)-based ternary OIHH, (4,4?-bpy)Ag2Br4, featuring rotational flexibility in the organic dication to induce asymmetry into the structure. The compound crystallizes in a monoclinic crystal system with a non-centrosymmetric polar P21 space group at room-temperature and undergoes a structural phase transition to a centrosymmetric phase (P21/c) at Curie temperature (Tc) of 330 K which was further supported by differential scanning calorimetry (DSC), second harmonic generation (SHG) signals, dielectric anomaly, current-voltage (I–V) profiles, and X-ray photoelectron spectroscopy (XPS) data. Ferroelectricity is confirmed through polarization–electric field (P–E) hysteresis loops and piezoresponse force microscopy (PFM), exhibiting switchable polar domains. Density functional theory (DFT) calculations revealed electronic structures of the ferroelectric and paraelectric phases, identified the (?-AgBr2)nn? inorganic anionic chain contributing to the net polarization, and in general, complemented the experimental results. Comparative studies with structurally analogous Ag(I)-based OIHHs lacking dication rotational freedom endorse the critical role of organic flexibility in driving ferroelectricity. This study provides insights into the role of organic dications in controlling ferroelectric behavior and offers a promising pathway for developing coinage metal-based OIHH ferroelectric materials. © 2025 Wiley-VCH GmbH.