Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
7 results
Search Results
Item Ferromagnetism in Mn-Doped ZnO: A Joint Theoretical and Experimental Study(American Chemical Society, 2021) Ali, N.; Singh, B.; A R, V.; Lal, S.; Yadav, C.S.; Tarafder, K.; Ghosh, S.We present a joint theoretical and experimental investigation on the origin of ferromagnetism in Mn-doped ZnO. Theoretical calculations revealed that the zinc vacancy (VZn) induces ferromagnetic ordering (FMO), whereas the oxygen vacancy (VO) quenches FMO in the Mn-doped ZnO system. This is further corroborated by the experimental results. Magnetic measurements revealed that Mn-doped ZnO shows room-temperature ferromagnetism (RTFM). Saturated magnetic moment per Mn2+ ion increases with oxygen partial pressure, indicating that the VZn enhances FMO in Mn-doped ZnO. Electron paramagnetic resonance and photoluminescence measurements revealed the presence of VZn in Mn-doped ZnO films. X-ray photoelectron spectroscopy measurements showed mixed oxidation states of Mn in Mn-doped ZnO films. Finally, we show that RTFM at very low doping concentrations is due to the overlapping of bound magnetic polarons. However, due to antiferromagnetic coupling at higher doping concentrations, the FMO weakens. © 2021 American Chemical Society.Item Distal Synergistic Effect in Bimetal-Organic Framework for Superior Catalytic Water Oxidation(American Chemical Society, 2023) Bhoi, U.; Ray, S.; Bhand, S.; Ninawe, P.; Roy, D.; Rana, S.; Tarafder, K.; Ballav, N.Metal-organic frameworks (MOFs) are emerging as promising electro-catalysts for the oxygen evolution reaction (OER). The bimetallic design strategy was further adopted in MOFs to elevate the OER performance by a synergistic effect. The proximal metal-oxygen-metal bonding configuration with typical 3dπ-2pπ-3dπ interaction was apparently essential for an effective electronic coupling between the metal centers. Here, we report an example of distal synergy in a bimetal-organic framework exhibiting a better OER activity than the monometallic counterparts, as well as the conventional proximal synergy. To achieve a current density of 10 mA·cm-2, our electrodeposited bimetallic MOF, Co-Ni(TCNQ)2(H2O)2 (TCNQ = 7,7,8,8-tetracyanoquinodimethane), on a glassy-carbon electrode required an overpotential value of 220 mV. X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations revealed distinctive electronic coupling between the Co(II)-3d7 and Ni(II)-3d8 centers, despite being 9 Å apart, leading to an overall charge delocalization in the structure via TCNQ. © 2023 American Chemical Society.Item Low field-cooled induced large exchange bias effect and DFT calculations in ferromagnetic Sm2CoMnO6(Elsevier Ltd, 2024) Nayak, A.; Prashanth, C.H.; Bala, D.; Reddy, I.R.; Tarafder, K.; Adyam, V.; Jyothinagaram, K.In the present report, we study the large exchange bias effect in Sm2CoMnO6 (SCMO) polycrystalline samples synthesized with the presence of two crystallographic phases: ordered-phase (monoclinic; P21/n) and disordered-phase (orthorhombic; Pnma). X-ray photoelectron spectroscopy study revealed the presence of mixed valence states for Co (2+ & 3+) and Mn (4+ & 3+). M(T) data exhibits an inhomogeneous magnetic state with the presence of ferromagnetic ordering at TC ∼128 K due to the super-exchange interactions of Co2+-O2--Mn4+ and antiferromagnetic-like spin correlations for T < 50 K, attributed to Co3+-O2--Co3+, and Mn3+-O2--Mn3+ interactions. M(H) loop shift with a conventional exchange bias (EB) effect of 10 kOe for a field-cooled (HFC) of 10 kOe at 2 K was observed. Such a large value of the EB effect for low HFC in SCMO is comparable to that of large EB compounds, such as La1·5Sr0·5CoMnO6 and NiFe2O4/CoO nanocomposites. The zero-field cooled asymmetry in the M(H) loop is termed a spontaneous exchange bias effect (SEB) observed for T < 20 K. The systematic study of EB effects like HEB and MEB with T(K) and HFC was explained qualitatively by the presence of unidirectional anisotropy formed at the interface of inhomogeneous magnetic phases. Further, density functional theory (DFT) calculations validate the ferromagnetic ground state of SCMO with Co and Mn networks. Moreover, the semiconductor characteristics of SCMO are established with a band gap of 1.3 eV. © 2023Item Excitonic cuprophilic interactions in one-dimensional hybrid organic-inorganic crystals(Royal Society of Chemistry, 2024) Hassan, N.; Nagaraja, S.; Saha, S.; Tarafder, K.; Ballav, N.The everlasting pursuit of hybrid organic-inorganic lead-free semiconductors has directed the focus towards eco-friendly copper-based systems, perhaps because of the diversity in chemistry, controlling the structure-property relationship. In this work, we report single crystals of a Cu(i) halide-based perovskite-like organic-inorganic hybrid, (TMA)Cu2Br3, (TMA = tetramethylammonium), consisting of unusual one-dimensional inorganic anionic chains of -(Cu2Br3)-, electrostatically stabilized by organic cations, and the Cu(i)-Cu(i) distance of 2.775 Å indicates the possibility of cuprophilic interactions. X-ray photoelectron spectroscopy measurements further confirmed the presence of exclusive Cu(i) in (TMA)Cu2Br3 and electronic structure calculations based on density functional theory suggested a direct bandgap value of 2.50 eV. The crystal device demonstrated an impressive bulk photovoltaic effect due to the emergence of excitonic Cu(i)-Cu(i) interactions, as was clearly visualized in the charge-density plot as well as in the Raman spectroscopic analysis. The single crystals of a silver analogue, (TMA)Ag2Br3, have also been synthesized revealing a Ag(i)-Ag(i) distance of 3.048 Å (signature of an argentophilic interaction). Unlike (TMA)Cu2Br3, where more density of states from Cu compared to Br near the Fermi level was observed, (TMA)Ag2Br3 exhibited the opposite trend, possibly due to variation in the ionic potential influencing the overall bonding scenario. © 2024 The Royal Society of Chemistry.Item Thermally-driven conformational twist in organic azobenzene linker activates molecular doping effect in thin films of lanthanide MOFs(Royal Society of Chemistry, 2025) Bhoi, U.; Kalyani, M.; Ananthram, K.S.; Saha, S.; Acharya, A.; Hassan, N.; Raj, M.; Tarafder, K.; Ballav, N.Azobenzene-based photo-switchable molecules have shown significant potential in stimuli-responsive systems, especially when incorporated into metal–organic frameworks (MOFs). This study reports thin films of lanthanide-based metal–organic frameworks (Ln-MOFs) with 4,4?-azobenzene dicarboxylic acid (H2ADA) as the organic linker – Tb-ADA, Eu-ADA, and Gd-ADA – using an electrodeposition method. Upon heating to 400 K, a reversible structural transition was observed via variable temperature grazing-incidence X-ray diffraction (GIXRD) and Raman spectroscopy, not due to trans–cis isomerization but rather a thermally-induced conformational twist of the ADA linker. Density functional theory (DFT) combined with molecular dynamics (MD) simulations supports this interpretation, revealing high-energy atropisomeric states stabilized by MOF confinement. Molecular doping of these films with 7,7,8,8-tetracyanoquinodimethane (TCNQ) significantly enhanced their electrical conductivity, increasing by two orders of magnitude at 400 K. This enhancement is attributed to improved ?–? stacking and charge-transfer interactions facilitated by the conformational twist. Temperature-dependent X-ray photoelectron spectroscopy (XPS) confirmed redox activity in TCNQ@Tb-ADA films, showing reversible conversion between Tb(iii) and Tb(iv), with back electron transfer at 400 K restoring Tb(iii). These findings introduce a new mechanism of thermally-driven conformational switching in MOFs and open avenues for developing responsive electronic materials based on azobenzene linkers. This journal is © The Royal Society of Chemistry, 2025Item Rotational Flexibility in Dication Drives Ambient Temperature Ferroelectricity in an Organic–Inorganic Hybrid Halide(John Wiley and Sons Inc, 2025) Hassan, N.; Panday, R.; Chandru, P.G.; Ananthram, K.S.; Jose, T.M.; Bhoi, U.; Sieradzki, A.; Zar?ba, J.K.; Boomishankar, R.; Tarafder, K.; Ballav, N.Organic–inorganic hybrid halides (OIHHs) have gained attention as potential ferroelectric materials due to structure-property synergy of the organic and inorganic constituents. This study introduces an unusual Ag(I)-based ternary OIHH, (4,4?-bpy)Ag2Br4, featuring rotational flexibility in the organic dication to induce asymmetry into the structure. The compound crystallizes in a monoclinic crystal system with a non-centrosymmetric polar P21 space group at room-temperature and undergoes a structural phase transition to a centrosymmetric phase (P21/c) at Curie temperature (Tc) of 330 K which was further supported by differential scanning calorimetry (DSC), second harmonic generation (SHG) signals, dielectric anomaly, current-voltage (I–V) profiles, and X-ray photoelectron spectroscopy (XPS) data. Ferroelectricity is confirmed through polarization–electric field (P–E) hysteresis loops and piezoresponse force microscopy (PFM), exhibiting switchable polar domains. Density functional theory (DFT) calculations revealed electronic structures of the ferroelectric and paraelectric phases, identified the (?-AgBr2)nn? inorganic anionic chain contributing to the net polarization, and in general, complemented the experimental results. Comparative studies with structurally analogous Ag(I)-based OIHHs lacking dication rotational freedom endorse the critical role of organic flexibility in driving ferroelectricity. This study provides insights into the role of organic dications in controlling ferroelectric behavior and offers a promising pathway for developing coinage metal-based OIHH ferroelectric materials. © 2025 Wiley-VCH GmbH.Item Temperature-dependent in situ Cd substitution at Zn sites in Cu2ZnSnS4 thin films via sol–gel method: Experimental and DFT insights(Elsevier B.V., 2025) Chennangod, S.; Ray, S.; P, A.S.; Tarafder, K.; Bhat, T.N.We report a systematic study of in situ cadmium (Cd) substitution at Zinc (Zn) sites in Cu2ZnSnS4 (CZTS) thin films synthesized via a scalable sol–gel route, with sulfurization carried out at 300 °C, 400 °C, and 500 °C. X-ray diffraction and Raman spectroscopy demonstrate that higher sulfurization temperatures along with increased Cd content progressively suppress the secondary Cu2SnS3 phase, while field-emission SEM and atomic force microscopy reveal enhanced grain growth and a smoother granular surface. UV–Vis absorption measurements show a continuous band-gap reduction from 1.43 eV in undoped CZTS to 1.20 eV at the highest Cd level, corroborated by a red shift in photoluminescence emission. X-ray photoelectron spectroscopy and density functional theory (GGA-PBE and HSE06) with orbital-projected density of states (p-DOS) analyses attribute this narrowing to localized Cd-induced states near the conduction band minimum and lattice expansion effects. Additionally, preliminary photovoltaic characterization demonstrated improved device performance for the Cd:CZTS solar cell compared to the pristine CZTS cell, exhibiting higher photocurrent density and enhanced external quantum efficiency. These results confirm that precise control of sulfurization temperature and Cd incorporation not only tailors the electronic structure and band gap but also suppresses undesirable secondary phases, offering a promising route to optimize kesterite thin films for high-efficiency photovoltaic applications. © 2025 Elsevier B.V.