Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Filters

20225

Settings

Author: search.filters.author.Suriapparao, D.V.Subject: search.filters.subject.pyrolysis

Search Results

Now showing 1 - 5 of 5
  • No Thumbnail Available
    Item
    Understanding of synergy in non-isothermal microwave-assisted in-situ catalytic co-pyrolysis of rice husk and polystyrene waste mixtures
    (Elsevier Ltd, 2022) Sridevi, V.; Suriapparao, D.V.; Tukarambai, M.; Terapalli, A.; Ramesh, R.; Sankar Rao, C.S.; Gautam, R.; Moorthy, J.V.; Suresh Kumar, C.
    Rice husk (RH) and polystyrene (PS) wastes were converted into value-added products using microwave-assisted catalytic co-pyrolysis. The graphite susceptor (10 g) along with KOH catalyst (5 g) was mixed with the feedstock to understand the products and energy consumption. RH promoted the char yield (20–34 wt%) and gaseous yields (16–25 wt%) whereas PS enhanced the oil yield (23–70 wt%). Co-pyrolysis synergy induced an increase in gaseous yields (14–53 wt%) due to excessive cracking. The specific microwave energy consumption dramatically decreased in co-pyrolysis (5–22 kJ/g) compared to pyrolysis (56–102 kJ/g). The pyrolysis index increased (17–445) with the increase in feedstock quantity (5–50 g). The obtained oil was composed of monoaromatics (74%) and polyaromatics (18%). The char was rich in carbon content (79.5 wt%) and the gases were composed of CO (24%), H2 (12%), and CH4 (22%). © 2022 Elsevier Ltd
  • No Thumbnail Available
    Item
    Effect of dry torrefaction pretreatment of the microwave-assisted catalytic pyrolysis of biomass using the machine learning approach
    (Elsevier Ltd, 2022) Ramesh, R.; Suriapparao, D.V.; Sankar Rao, C.S.; Sridevi, V.; Kumar, A.
    This study employs the Leave-One-Out cross-validation approach to build a machine-learning model using polynomial regression to predict pyro product yield through microwave-assisted pyrolysis of sawdust over KOH catalyst and graphite powder a susceptor. The determination of coefficient (R2) validates the developed models. All the developed models achieved a high prediction accuracy with R2 > 0.93, which signifies that the experimental values are in good agreement with the predicted one. The dependence of the catalyst loading and pretreatment temperature on dominating process parameters such as heating rate, pyrolysis temperature, susceptor thermal energy, and pyro products, namely bio-oil, biochar, and biogas, are explored. The yield of biochar is reduced; however, bio-oil and biogas are enhanced as the catalyst loading increased. On the other hand, increasing the temperature of pretreated sawdust decreased bio-oil and biogas yields while increasing biochar yields. Further, microwave conversion efficiency, and susceptor thermal energy increased with increased catalyst quantity and pretreatment temperatures of sawdust. It was observed that the average heating rate was increased by increasing the catalyst quantity while maintaining the same pyrolysis time until pretreatment temperatures of 150 °C were reached, after which the heating rate dropped due to the continuous microwave energy input to the system. © 2022 Elsevier Ltd
  • No Thumbnail Available
    Item
    Synthesis of sustainable chemicals from waste tea powder and Polystyrene via Microwave-Assisted in-situ catalytic Co-Pyrolysis: Analysis of pyrolysis using experimental and modeling approaches
    (Elsevier Ltd, 2022) Suriapparao, D.V.; Sridevi, V.; Ramesh, R.; Sankar Rao, C.S.; Tukarambai, M.; Kamireddi, D.; Gautam, R.; Dharaskar, S.A.; Pritam, K.
    In the current study, catalytic co-pyrolysis was performed on waste tea powder (WTP) and polystyrene (PS) wastes to convert them into value-added products using KOH catalyst. The feed mixture influenced the heating rates (17–75 °C/min) and product formation. PS promoted the formation of oil and WTP enhanced the char formation. The maximum oil yield (80 wt%) was obtained at 15 g:5 g, and the maximum char yield (44 wt%) was achieved at 5 g:25 g (PS:WTP). The pyrolysis index (PI) increased with the increase in feedstock quantity. High PI was noticed at 25 g:5 g, and low PI was at 5 g:5 g (PS:WTP). Low energy consumption and low pyrolysis time enhanced the PI value. Significant interactions were noticed during co-pyrolysis. The obtained bio-oil was analyzed using GC–MS and a plausible reaction mechanism is presented. Catalyst and co-pyrolysis synergy promoted the formation of aliphatic and aromatic hydrocarbons by reducing the oxygenated products. © 2022 Elsevier Ltd
  • No Thumbnail Available
    Item
    The role of solvent soaking and pretreatment temperature in microwave-assisted pyrolysis of waste tea powder: Analysis of products, synergy, pyrolysis index, and reaction mechanism
    (Elsevier Ltd, 2022) Talib Hamzah, H.; Sridevi, V.; Seereddi, M.; Suriapparao, D.V.; Ramesh, R.; Sankar Rao, C.S.; Gautam, R.; Kaka, F.; Pritam, K.
    This study focuses on microwave-assisted pyrolysis (MAP) of fresh waste tea powder and torrefied waste tea powder as feedstocks. Solvents including benzene, acetone, and ethanol were used for soaking feedstocks. The feedstock torrefaction temperature (at 150 °C) and solvents soaking enhanced the yields of char (44.2–59.8 wt%) and the oil (39.8–45.3 wt%) in MAP. Co-pyrolysis synergy induced an increase in the yield of gaseous products (4.7–20.1 wt%). The average heating rate varied in the range of 5–25 °C/min. The energy consumption in MAP of torrefied feedstock (1386 KJ) significantly decreased compared to fresh (3114 KJ). The pyrolysis index dramatically varied with the solvent soaking in the following order: ethanol (26.7) > benzene (25.6) > no solvent (10) > acetone (6). It shows that solvent soaking plays an important role in the pyrolysis process. The obtained bio-oil was composed of mono-aromatics, poly-aromatics, and oxygenated compounds. © 2022 Elsevier Ltd
  • No Thumbnail Available
    Item
    The effect of torrefaction temperature and catalyst loading in Microwave-Assisted in-situ catalytic Co-Pyrolysis of torrefied biomass and plastic wastes
    (Elsevier Ltd, 2022) Ramesh, R.; Suriapparao, D.V.; Sankar Rao, C.S.; Sridevi, V.; Kumar, A.; Shah, M.
    In the current study, the effect of torrefaction temperatures (125–175 °C) and catalyst quantity (5–15 g) on co-pyrolysis of torrefied sawdust (TSD) and polystyrene (PS) are investigated to obtain value-added products. The role of torrefaction in co-pyrolysis of TSD: PS was analyzed to understand the product yields, synergy, and energy consumption. As the torrefaction temperature increases, oil yield (48.3–59.6 wt%) and char yield (24.3–29 wt%) increase while gas yield (27.4–11.4 wt%) decreases. Catalytic co-pyrolysis showed a significant level of synergy when compared to non-catalytic co-pyrolysis. For the conversion (%), a positive synergy maximum (-2.6) exists at a torrefaction temperature of 175 °C and 15 g of KOH catalyst. To develop the model, polynomial regression-based machine learning was used to predict pyrolysis product yields and energy usage variables. The developed models showed significant prediction accuracy (R2 > 0.98), suggesting the experimental values and the predicted values matched well. © 2022 Elsevier Ltd